Same difference. Mike Burden Lynk Systems http://www.lynk.com (616)532-4985 [EMAIL PROTECTED]
> -----Original Message----- > From: Clive Walker [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, February 05, 2003 9:16 AM > To: [EMAIL PROTECTED] > Subject: RE: [gb-users] Remote logging via VPN > > > I'm not trying to access the Gnatbox, I'm wanting the Gnatbox to send > packets to me. > Are you saying that my requirement is a non-starter? Can > anyone from GTA > confirm this? > > > Best Regards > > Clive Walker > > -----Original Message----- > From: Mike Burden [mailto:[EMAIL PROTECTED]] > Sent: 05 February 2003 14:01 > To: [EMAIL PROTECTED] > Subject: RE: [gb-users] Remote logging via VPN > > > Yes, the fact that you can't ping from one to the other is > a clue. The VPN is tunnel mode, not transport mode, which > effectively means you can't access the GNAT Box through the > VPN. > > Mike Burden > Lynk Systems > http://www.lynk.com > (616)532-4985 > [EMAIL PROTECTED] > > > > -----Original Message----- > > From: Clive Walker [mailto:[EMAIL PROTECTED]] > > Sent: Wednesday, February 05, 2003 7:26 AM > > To: [EMAIL PROTECTED] > > Subject: [gb-users] Remote logging via VPN > > > > > > Hi All > > > > I am trying to use the SYSlog utility to log messages from a > > Gnatbox Flash > > that is remote from my site. > > I have set up a VPN between my local Gnatbox and the remote > > one which seems > > to be working OK. (I can ping targets on the other network's > > protected zone, > > and vice versa). The Remote Logging Service (on the remote > > Gnatbox) has > > been set to target an IP address in my protected zone, but it > > never receives > > any info. > > > > My syslog on that same target will receive info from my local > > Gnatbox so I > > know it is listening. (I have directed the local Gnatbox > > Remote Logging > > Service to a different target now). > > > > I know I cannot use the ping tool within either Gnatbox to > > ping the other > > protected network. Is this a clue to the problem? > > > > I am using version 3.2.5 on both GBFlash machines. > > Hoping someone has a solution. > > Thanks for reading this. > > > > Clive Walker > > > > IT Manager > > Employer Services Ltd > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > To subscribe to the digest version first unsubscribe, then > > e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > Archive of the last 1000 messages: > > http://www.mail-archive.com/[email protected] > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > To subscribe to the digest version first unsubscribe, then > e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > Archive of the last 1000 messages: > http://www.mail-archive.com/[email protected] > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > To subscribe to the digest version first unsubscribe, then > e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > Archive of the last 1000 messages: > http://www.mail-archive.com/[email protected] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] To subscribe to the digest version first unsubscribe, then e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archive of the last 1000 messages: http://www.mail-archive.com/[email protected]
