Try adding an Outbound filter as follows: Allow all protocols, and protected network systems out to all IP. Be very careful when setting this filter as you can easily open yourself to attack.
If that filter solves the problem, then I would refine it and make certain you add filters for ports and protocols you do not want out. Danny -----Original Message----- From: Mike Anthony [mailto:[EMAIL PROTECTED] Sent: Thursday, October 16, 2003 12:21 PM To: [EMAIL PROTECTED] Subject: [gb-users] Gnatbox Light 3.4.0 problem I have downloaded v 3.4.0 and have been working with it for over a day now to try to get it working, but with no success. I have cable internet using DHCP on the External interface and a static ip on the Protected interface. >From my GB machine, I can successfully ping websights on the internet as well as computers on my protected network. From my workstations, I can ping the protected interface of the GB computer, but I can't gain any access beyond that. I can also access my GB computer using GBAdmin. I have set my default gateway for my workstations to the IP address of the Protected interface of my GB computer. I was looking on the GnatBox Light Forum and saw that many other people are experiencing the same problem. They are saying they were going back to 3.3.4 but I don't have that version. If anyone has any ideas of what the problem is or where I can get 3.3.4, I would appreciate it. Mike Anthony mailto:[EMAIL PROTECTED] ------------------------------------------------------ To unsubscribe: [EMAIL PROTECTED] For additional commands: [EMAIL PROTECTED] Archive: http://www.mail-archive.com/[EMAIL PROTECTED] ------------------------------------------------------ To unsubscribe: [EMAIL PROTECTED] For additional commands: [EMAIL PROTECTED] Archive: http://www.mail-archive.com/[EMAIL PROTECTED]
