Hi all, I hope someone can offer some advice on having 2 ADSL connections onto one RoBoX for resilience (and maybe even load-balancing?). I'm guessing that the RoBoX doesn't have this functionality but is there something that put between the 2 lines and the unit (e.g. an ADSL router that can run 2 lines)?
Just as some further information, the unit is currently in a satellite office. The number of users is rapidly growing (although not going to hit the 25 user limit). It's probably time for a leased circuit but they're likely to move offices in the next 6 months so it's hard to justify this. In the short-term, I'd like to be able to get a second ADSL circuit. At the very least, the existing 1meg line should act a failover to the proposed new 2meg line, but preferably both would be used concurrently. Has anyone done anything like this before? Thanks in advance, Simon ------------------------------------- Simon Warburton [EMAIL PROTECTED] ------------------------------------- -------------------------------------------------------- The information in this email is confidential and may be legally privileged. It is intended solely for the addressee and access to this email by anyone else is unauthorised. Any views or opinions presented are solely those of the author and do not necessarily represent those of the organisation. If you are not the intended recipient any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. If you have received this email in error please notify the sender immediately. ------------------------------------------------------ To unsubscribe: [EMAIL PROTECTED] For additional commands: [EMAIL PROTECTED] Archive: http://www.mail-archive.com/[EMAIL PROTECTED]
