No coments? Is there someone from GTA that I could forward this to? Thanks in advance,
Brent ----- Original Message ----- From: "Brent McLaren" <[EMAIL PROTECTED]> To: "Gnatbox Users (E-mail)" <[EMAIL PROTECTED]> Sent: Sunday, December 28, 2003 2:46 AM Subject: [gb-users] GB-Light 3.4.1 problems??? > I just attempted to upgrade to GB-Light 3.4.1 and found a few problems. If > anyone can re-produce these, I would appreciate it if you would let me know. > Could be a problem with my config. > > 1) With the un-registered version, you are limited to 2 addresses using > outbound tunnels, and 4 addresses for inbound tunnels. For some reason, with > only two hosts connected internally (protected network), I am getting the > "NAT: Max of 2 simultaneous hosts reached (xx.xx.xx.xx) denied). Free in 600 > seconds." message. where xx.xx.xx.xx is one of the two internal (protected > network) hosts. I also get the same message where xx.xx.xx.xx is an outside > address which would be the source of an inbound tunnel. If I look at the > "System Activity->Active Hosts" tab in GBAdmin, it contains both an internal > address, and an external address. I am guessing that with the latest changes, > the accounting of inbound tunnels and outbound tunnel simultaneous address > metering got merged??? From the description of the "System Activity->Active > Hosts" tab, it seems that this should only be used for internal host limit > checking. Can anyone confirm this behavior? > > 2) The GBLight registration page does not seem to have 3.4 on it yet (hence > the limit of 2 above). Am I missing something, or is it just not ready yet? > > 3) When updating either Remote Access or Outbound filters, the summary line > does not change as the entry is updated. You can actually select another > rule, and the summary does not reflect the changes made in the changed rule. > Not until you re-select the rule does it update the summary. Once again, can > anyone confirm this? From memory, previous versions did update dynamically. > On a side note, I really miss the description being in the summary. > > 4) When connecting to a 3.3.4 system with GBAdmin 3.4.1, GBAdmin detects the > remote as a GB-Pro 3.3.4 system instead of a GB-Light. I tried changing the > type before connecting, but it still changes to GB-Pro when it connects. > Selecting "Runtime->Version" displays "Remote: GNAT Box GB-Pro 3.3.4". > Everything seems to work, except it displays a warning that says the Feature 1 > is for wrong product, and it probably displays some options it should not. I > know that I am probably supposed to revert to GBAdmin 3.3.4, but I wouldn't > think it should behave like this. (As you can probably tell, I am back to > running 3.3.4 again:) ) > > > Anyone have any comments, or can confirm what I am seeing? > > Thanks, > > Brent > > ------------------------------------------------------ > To unsubscribe: [EMAIL PROTECTED] > For additional commands: [EMAIL PROTECTED] > Archive: http://archives.gnatbox.com/gb-users/ ------------------------------------------------------ To unsubscribe: [EMAIL PROTECTED] For additional commands: [EMAIL PROTECTED] Archive: http://archives.gnatbox.com/gb-users/
