First, are the two rules structured like: Accept notice "PROTECTED" TCP from ANY_IP to PROTECTED 443
Accept notice ANY TCP from ANY_IP to ANY_IP 77 Second, how high up the list of rules are these? Is there a possibility that these rules are being superseded by a lower numbered rule? Third, just for the hell of it, have you tried remote admin from the DMZ or EXT interfaces? I know this is a long long long long shot...but its worth a try! Christopher > -----Original Message----- > From: Scheldebouw [mailto:[EMAIL PROTECTED] > Sent: Thursday, June 09, 2005 04:39 > To: [email protected] > Subject: [gb-users] Unable to manage via GBAdmin or HTTPS > > Hi, > > I have an Robox that I was used to be able to manage via GBAdmin and HTTPS > via the internal network. Somehow I screwed up the config and this is not > possible anymore. I also am unable to ping the internal network interface > address. But the Robox is working perfectly in every other way! > I am able to manage it via the serial interface and I can see that I have > a > remote access rule in place (top rule) to allow access from the protected > network to ports 77 and 443 TCP on the internal interface. > If I look at the log I can see a block when trying GBADmin or HTTPS access > but the display in the terminal is not long enough to show the full line > (vt100). > > What's the best way to solve this? Would an other terminal emulation > version allow me to see the complete error log? Or can I export the config > and / or the error log somehow to check it? > > Thanks. > > ------------------------------------------------------ > To unsubscribe: [EMAIL PROTECTED] > For additional commands: [EMAIL PROTECTED] > Archive: http://archives.gnatbox.com/gb-users/ ------------------------------------------------------ To unsubscribe: [EMAIL PROTECTED] For additional commands: [EMAIL PROTECTED] Archive: http://archives.gnatbox.com/gb-users/
