Ok, first you have to make a tunnel (Nat/Inbound tunnels) from your
public www ip address to 192.168.1.23 from port 8080 to port 8080.
Then make a remote access filter (Filters/Remote Access) on the External
interface that allows incoming traffic to port 8080 on your public www
ip address from everyone/all ports.
/Johan
Rick Jones wrote:
Hi,
The server is on my lan. It has an address of 192.168.1 23
Rick
-----Original Message-----
From: Johan L [mailto:[EMAIL PROTECTED]
Sent: Wednesday, December 07, 2005 11:26 AM
To: Rick Jones
Subject: Re: [gb-users] Opening port 8080
Hi!
Where is the server located, Lan or Dmz?
Does the server have an internal (for example 192.168.1.X) or public ip
address?
/Johan
Rick Jones wrote:
Hi,
I have a webserver that is running on my network.
I am trying to set access for the outside world to connect using port 8080
That port is open on the server, but how can I open it on the gb-1000 I have?
Thanks
Rick
------------------------------------------------------
To unsubscribe: [EMAIL PROTECTED]
For additional commands: [EMAIL PROTECTED]
Archive: http://archives.gnatbox.com/gb-users/
------------------------------------------------------
To unsubscribe: [EMAIL PROTECTED]
For additional commands: [EMAIL PROTECTED]
Archive: http://archives.gnatbox.com/gb-users/
