Scheldebouw wrote:
Maarten, thanks for your reply.
I thought of your option 1 right after posting this message. However,
for now I do not want to mess about with a switch/hub between my router
and firewall to get this device connected.
Your option 3 is closest to my initial idea however, I have no idea how
to set this up. How do I configure the interface (as PSN or Protected,
what IP address)?
And how do I setup bridging? How do I define the Pass Through Filters?
We're on 3.7.1
Any help would be greatly appreciated.
Best Regards,
Benno
Hi Benno,
You can configure a bridge in the Basic Configuration -> Network Information
screen. The bridge setup is near the bottom of the screen. Simply enter a
logical name for your bridge, type external, select your external interface in
the "interface" box, and select the free network interface you'd like to use in
the NIC field.
After that, save this section and create pass through filters allowing the
traffic you'd like to pass through your firewall to the machine. To allow all
traffic, create two filters; one from your external interface, source address
ANY_IP, with the IP address of the machine in question as destination. The
second filter should be from your newly configured bridge interface, source
address of the machine, and destination ANY_IP.
For more information, please refer to the manual for your GB-OS version:
http://www.gnatbox.nl/files/bestanden/Manuals/GB_System_Guide_3.7p.pdf
Bridging is documented on pages 16 and 17, and more information on pass through
filters can be found in chapter 10.
Regards,
Maarten Vink
Interstroom IT BV
Distributor Benelux
http://www.gnatbox.nl/
------------------------------------------------------
To unsubscribe: [EMAIL PROTECTED]
For additional commands: [EMAIL PROTECTED]
Archive: http://archives.gnatbox.com/gb-users/
