On Sun, Jun 05, 2011 at 12:54:41PM -0700, H.J. Lu wrote:
> Hi,
> 
> I'd like to start submitting a series of patches to enable x32:
> 
> https://sites.google.com/site/x32abi/
> 
> The GCC x32 branch is very stable. There are no unexpected failures in
> C, C++, Fortran and Objective C testsuites.  SPEC CPU 2K/2006 compile
> and run correctly at -O2 and -O3. 
> 
> More than 90% of changes are in x86 backend.  This is the first patch to
> support x32.  By default, x32 is disabled and x32 run-time support
> isn't required.  OK for trunk?
> 
> Thanks.
> 
> 

Here is the updated patch based on the feedbacks.

Thanks.


H.J.
---
2011-06-14  H.J. Lu  <hongjiu...@intel.com>

        * config.gcc: Support --enable-x32/--enable-ia32 for x86 Linux
        targets.

        * configure.ac: Support --enable-x32/--enable-ia32.
        * configure: Regenerated.

        * config/i386/gnu-user64.h (SPEC_64): Support x32.
        (SPEC_32): Likewise.
        (ASM_SPEC): Likewise.
        (LINK_SPEC): Likewise.
        (TARGET_THREAD_SSP_OFFSET): Likewise.
        (TARGET_THREAD_SPLIT_STACK_OFFSET): Likewise.
        (SPEC_X32): New.

        * config/i386/i386.h (TARGET_X32): New.
        (TARGET_LP64): New.
        (LONG_TYPE_SIZE): Likewise.
        (POINTER_SIZE): Likewise.
        (POINTERS_EXTEND_UNSIGNED): Likewise.
        (OPT_ARCH64): Support x32.
        (OPT_ARCH32): Likewise.

        * config/i386/i386.opt (mx32): New.

        * config/i386/kfreebsd-gnu64.h (GNU_USER_LINK_EMULATIONX32): New.
        (GLIBC_DYNAMIC_LINKERX32): Likewise.
        * config/i386/linux64.h (GNU_USER_LINK_EMULATIONX32): Likewise.
        (GLIBC_DYNAMIC_LINKERX32): Likewise.

        * config/i386/t-linux-x32: New.
        * config/i386/t-linux64-x32: Likewise.

        * config/linux.h (UCLIBC_DYNAMIC_LINKERX32): New.
        (BIONIC_DYNAMIC_LINKERX32): Likewise.
        (GNU_USER_DYNAMIC_LINKERX32): Likewise.

        * doc/install.texi: Document --enable-ia32 and --enable-x32.

        * doc/invoke.texi: Document -mx32.

diff --git a/gcc/config.gcc b/gcc/config.gcc
index e9704f3..e2b72df 100644
--- a/gcc/config.gcc
+++ b/gcc/config.gcc
@@ -1232,7 +1232,17 @@ i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | 
i[34567]86-*-knetbsd*-gnu | i
                if test x$enable_targets = xall; then
                        tm_file="${tm_file} i386/x86-64.h i386/gnu-user64.h 
i386/linux64.h"
                        tm_defines="${tm_defines} TARGET_BI_ARCH=1"
-                       tmake_file="${tmake_file} i386/t-linux64"
+                       case x${enable_x32}${enable_ia32} in
+                       xyesyes)
+                               tmake_file="${tmake_file} i386/t-linux-x32"
+                               ;;
+                       xyesno)
+                               tmake_file="${tmake_file} i386/t-linux64-x32"
+                               ;;
+                       *)
+                               tmake_file="${tmake_file} i386/t-linux64"
+                               ;;
+                       esac
                        need_64bit_hwint=yes
                        need_64bit_isa=yes
                        case X"${with_cpu}" in
@@ -1270,7 +1280,18 @@ x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | 
x86_64-*-knetbsd*-gnu)
        x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h 
i386/kfreebsd-gnu64.h" ;;
        x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
        esac
-       tmake_file="${tmake_file} i386/t-linux64 i386/t-crtstuff i386/t-crtpc 
i386/t-crtfm t-dfprules"
+       case x${enable_x32}${enable_ia32} in
+       xyesyes)
+               tmake_file="${tmake_file} i386/t-linux-x32"
+               ;;
+       xyesno)
+               tmake_file="${tmake_file} i386/t-linux64-x32"
+               ;;
+       *)
+               tmake_file="${tmake_file} i386/t-linux64"
+               ;;
+       esac
+       tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtpc i386/t-crtfm 
t-dfprules"
        ;;
 i[34567]86-pc-msdosdjgpp*)
        xm_file=i386/xm-djgpp.h
diff --git a/gcc/config/i386/gnu-user64.h b/gcc/config/i386/gnu-user64.h
index b069975..954f3b2 100644
--- a/gcc/config/i386/gnu-user64.h
+++ b/gcc/config/i386/gnu-user64.h
@@ -58,25 +58,31 @@ see the files COPYING3 and COPYING.RUNTIME respectively.  
If not, see
 
 #if TARGET_64BIT_DEFAULT
 #define SPEC_32 "m32"
-#define SPEC_64 "!m32"
+#define SPEC_64 "m32|mx32:;"
+#define SPEC_X32 "mx32"
 #else
-#define SPEC_32 "!m64"
+#define SPEC_32 "m64|mx32:;"
 #define SPEC_64 "m64"
+#define SPEC_X32 "mx32"
 #endif
 
 #undef ASM_SPEC
-#define ASM_SPEC "%{" SPEC_32 ":--32} %{" SPEC_64 ":--64} \
+#define ASM_SPEC "%{" SPEC_32 ":--32} \
+ %{" SPEC_64 ":--64} \
+ %{" SPEC_X32 ":--x32} \
  %{!mno-sse2avx:%{mavx:-msse2avx}} %{msse2avx:%{!mavx:-msse2avx}}"
 
 #undef LINK_SPEC
 #define LINK_SPEC "%{" SPEC_64 ":-m " GNU_USER_LINK_EMULATION64 "} \
                    %{" SPEC_32 ":-m " GNU_USER_LINK_EMULATION32 "} \
+                   %{" SPEC_X32 ":-m " GNU_USER_LINK_EMULATIONX32 "} \
   %{shared:-shared} \
   %{!shared: \
     %{!static: \
       %{rdynamic:-export-dynamic} \
       %{" SPEC_32 ":-dynamic-linker " GNU_USER_DYNAMIC_LINKER32 "} \
-      %{" SPEC_64 ":-dynamic-linker " GNU_USER_DYNAMIC_LINKER64 "}} \
+      %{" SPEC_64 ":-dynamic-linker " GNU_USER_DYNAMIC_LINKER64 "} \
+      %{" SPEC_X32 ":-dynamic-linker " GNU_USER_DYNAMIC_LINKERX32 "}} \
     %{static:-static}}"
 
 /* Similar to standard GNU userspace, but adding -ffast-math support.  */
@@ -110,10 +116,13 @@ see the files COPYING3 and COPYING.RUNTIME respectively.  
If not, see
 
 #ifdef TARGET_LIBC_PROVIDES_SSP
 /* i386 glibc provides __stack_chk_guard in %gs:0x14,
+   x32 glibc provides it in %fs:0x18. 
    x86_64 glibc provides it in %fs:0x28.  */
-#define TARGET_THREAD_SSP_OFFSET       (TARGET_64BIT ? 0x28 : 0x14)
+#define TARGET_THREAD_SSP_OFFSET \
+  (TARGET_64BIT ? (TARGET_X32 ? 0x18 : 0x28) : 0x14)
 
 /* We steal the last transactional memory word.  */
 #define TARGET_CAN_SPLIT_STACK
-#define TARGET_THREAD_SPLIT_STACK_OFFSET (TARGET_64BIT ? 0x70 : 0x30)
+#define TARGET_THREAD_SPLIT_STACK_OFFSET \
+  (TARGET_64BIT ? (TARGET_X32 ? 0x40 : 0x70) : 0x30)
 #endif
diff --git a/gcc/config/i386/i386.h b/gcc/config/i386/i386.h
index 8badcbb..ec86e74 100644
--- a/gcc/config/i386/i386.h
+++ b/gcc/config/i386/i386.h
@@ -42,6 +42,7 @@ see the files COPYING3 and COPYING.RUNTIME respectively.  If 
not, see
 /* Redefines for option macros.  */
 
 #define TARGET_64BIT   OPTION_ISA_64BIT
+#define TARGET_X32     OPTION_ISA_X32
 #define TARGET_MMX     OPTION_ISA_MMX
 #define TARGET_3DNOW   OPTION_ISA_3DNOW
 #define TARGET_3DNOW_A OPTION_ISA_3DNOW_A
@@ -72,6 +73,7 @@ see the files COPYING3 and COPYING.RUNTIME respectively.  If 
not, see
 #define TARGET_RDRND   OPTION_ISA_RDRND
 #define TARGET_F16C    OPTION_ISA_F16C
 
+#define TARGET_LP64    (TARGET_64BIT && !TARGET_X32)
 
 /* SSE4.1 defines round instructions */
 #define        OPTION_MASK_ISA_ROUND   OPTION_MASK_ISA_SSE4_1
@@ -517,8 +519,8 @@ extern const char *host_detect_local_cpu (int argc, const 
char **argv);
 #define OPT_ARCH64 "!m32"
 #define OPT_ARCH32 "m32"
 #else
-#define OPT_ARCH64 "m64"
-#define OPT_ARCH32 "!m64"
+#define OPT_ARCH64 "m64|mx32"
+#define OPT_ARCH32 "m64|mx32:;"
 #endif
 
 /* Support for configure-time defaults of some command line options.
@@ -638,6 +640,8 @@ enum target_cpu_default
 
 #define SHORT_TYPE_SIZE 16
 #define INT_TYPE_SIZE 32
+#define LONG_TYPE_SIZE (TARGET_X32 ? 32 : BITS_PER_WORD)
+#define POINTER_SIZE (TARGET_X32 ? 32 : BITS_PER_WORD)
 #define LONG_LONG_TYPE_SIZE 64
 #define FLOAT_TYPE_SIZE 32
 #define DOUBLE_TYPE_SIZE 64
@@ -1743,6 +1747,13 @@ do {                                                     
\
    between pointers and any other objects of this machine mode.  */
 #define Pmode (TARGET_64BIT ? DImode : SImode)
 
+/* A C expression whose value is zero if pointers that need to be extended
+   from being `POINTER_SIZE' bits wide to `Pmode' are sign-extended and
+   greater then zero if they are zero-extended and less then zero if the
+   ptr_extend instruction should be used.  */
+
+#define POINTERS_EXTEND_UNSIGNED 1
+
 /* A function address in a call instruction
    is a byte address (for indexing purposes)
    so give the MEM rtx a byte's mode.  */
diff --git a/gcc/config/i386/i386.opt b/gcc/config/i386/i386.opt
index 21e0def..2c8fe8f 100644
--- a/gcc/config/i386/i386.opt
+++ b/gcc/config/i386/i386.opt
@@ -398,9 +398,13 @@ Target RejectNegative Negative(m64) Report 
InverseMask(ISA_64BIT) Var(ix86_isa_f
 Generate 32bit i386 code
 
 m64
-Target RejectNegative Negative(m32) Report Mask(ISA_64BIT) Var(ix86_isa_flags) 
Save
+Target RejectNegative Negative(mx32) Report Mask(ISA_64BIT) 
Var(ix86_isa_flags) Save
 Generate 64bit x86-64 code
 
+mx32
+Target RejectNegative Negative(m32) Report Mask(ISA_X32) Var(ix86_isa_flags) 
Save
+Generate 32bit x86-64 code
+
 mmmx
 Target Report Mask(ISA_MMX) Var(ix86_isa_flags) Save
 Support MMX built-in functions
diff --git a/gcc/config/i386/kfreebsd-gnu64.h b/gcc/config/i386/kfreebsd-gnu64.h
index c3798a5..2085ca5 100644
--- a/gcc/config/i386/kfreebsd-gnu64.h
+++ b/gcc/config/i386/kfreebsd-gnu64.h
@@ -21,6 +21,8 @@ along with GCC; see the file COPYING3.  If not see
 
 #define GNU_USER_LINK_EMULATION32 "elf_i386_fbsd"
 #define GNU_USER_LINK_EMULATION64 "elf_x86_64_fbsd"
+#define GNU_USER_LINK_EMULATIONX32 "elf32_x86_64_fbsd"
 
 #define GLIBC_DYNAMIC_LINKER32 "/lib/ld.so.1"
 #define GLIBC_DYNAMIC_LINKER64 "/lib/ld-kfreebsd-x86-64.so.1"
+#define GLIBC_DYNAMIC_LINKERX32 "/lib/ld-kfreebsd-x32.so.1"
diff --git a/gcc/config/i386/linux64.h b/gcc/config/i386/linux64.h
index 5d33224..5b0a212 100644
--- a/gcc/config/i386/linux64.h
+++ b/gcc/config/i386/linux64.h
@@ -26,6 +26,8 @@ see the files COPYING3 and COPYING.RUNTIME respectively.  If 
not, see
 
 #define GNU_USER_LINK_EMULATION32 "elf_i386"
 #define GNU_USER_LINK_EMULATION64 "elf_x86_64"
+#define GNU_USER_LINK_EMULATIONX32 "elf32_x86_64"
 
 #define GLIBC_DYNAMIC_LINKER32 "/lib/ld-linux.so.2"
 #define GLIBC_DYNAMIC_LINKER64 "/lib64/ld-linux-x86-64.so.2"
+#define GLIBC_DYNAMIC_LINKERX32 "/libx32/ld-linux-x32.so.2"
diff --git a/gcc/config/i386/t-linux-x32 b/gcc/config/i386/t-linux-x32
new file mode 100644
index 0000000..92acf91
--- /dev/null
+++ b/gcc/config/i386/t-linux-x32
@@ -0,0 +1,42 @@
+# Copyright (C) 2011 Free Software Foundation, Inc.
+#
+# This file is part of GCC.
+#
+# GCC is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3, or (at your option)
+# any later version.
+#
+# GCC is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GCC; see the file COPYING3.  If not see
+# <http://www.gnu.org/licenses/>.
+
+# On Debian, Ubuntu and other derivative distributions, the 32bit libraries
+# are found in /lib32 and /usr/lib32, /lib64 and /usr/lib64 are symlinks to
+# /lib and /usr/lib, while other distributions install libraries into /lib64
+# and /usr/lib64.  The LSB does not enforce the use of /lib64 and /usr/lib64,
+# it doesn't tell anything about the 32bit libraries on those systems.  Set
+# MULTILIB_OSDIRNAMES according to what is found on the target.
+
+# To support i386, x86-64 and x32 libraries, the directory structrue
+# should be:
+#
+#      /lib has i386 libraries.
+#      /lib64 has x86-64 libraries.
+#      /libx32 has x32 libraries.
+#
+MULTILIB_OPTIONS = m64/m32/mx32
+MULTILIB_DIRNAMES = 64 32 x32
+MULTILIB_OSDIRNAMES = ../lib64 $(if $(wildcard $(shell echo 
$(SYSTEM_HEADER_DIR))/../../usr/lib32),../lib32,../lib) ../libx32
+
+LIBGCC = stmp-multilib
+INSTALL_LIBGCC = install-multilib
+
+EXTRA_MULTILIB_PARTS=crtbegin.o crtend.o crtbeginS.o crtendS.o \
+                    crtbeginT.o crtprec32.o crtprec64.o crtprec80.o \
+                    crtfastmath.o
diff --git a/gcc/config/i386/t-linux64-x32 b/gcc/config/i386/t-linux64-x32
new file mode 100644
index 0000000..3a4d1de
--- /dev/null
+++ b/gcc/config/i386/t-linux64-x32
@@ -0,0 +1,34 @@
+# Copyright (C) 2011 Free Software Foundation, Inc.
+#
+# This file is part of GCC.
+#
+# GCC is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3, or (at your option)
+# any later version.
+#
+# GCC is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GCC; see the file COPYING3.  If not see
+# <http://www.gnu.org/licenses/>.
+
+# To support x86-64 and x32 libraries, the directory structrue
+# should be:
+#
+#      /lib64 has x86-64 libraries.
+#      /libx32 has x32 libraries.
+#
+MULTILIB_OPTIONS = m64/mx32
+MULTILIB_DIRNAMES = 64 x32
+MULTILIB_OSDIRNAMES = ../lib64 ../libx32
+
+LIBGCC = stmp-multilib
+INSTALL_LIBGCC = install-multilib
+
+EXTRA_MULTILIB_PARTS=crtbegin.o crtend.o crtbeginS.o crtendS.o \
+                    crtbeginT.o crtprec32.o crtprec64.o crtprec80.o \
+                    crtfastmath.o
diff --git a/gcc/config/linux.h b/gcc/config/linux.h
index fc897b1..dbbeea5 100644
--- a/gcc/config/linux.h
+++ b/gcc/config/linux.h
@@ -77,9 +77,11 @@ see the files COPYING3 and COPYING.RUNTIME respectively.  If 
not, see
 #define UCLIBC_DYNAMIC_LINKER "/lib/ld-uClibc.so.0"
 #define UCLIBC_DYNAMIC_LINKER32 "/lib/ld-uClibc.so.0"
 #define UCLIBC_DYNAMIC_LINKER64 "/lib/ld64-uClibc.so.0"
+#define UCLIBC_DYNAMIC_LINKERX32 "/lib/ldx32-uClibc.so.0"
 #define BIONIC_DYNAMIC_LINKER "/system/bin/linker"
 #define BIONIC_DYNAMIC_LINKER32 "/system/bin/linker"
 #define BIONIC_DYNAMIC_LINKER64 "/system/bin/linker64"
+#define BIONIC_DYNAMIC_LINKERX32 "/system/bin/linkerx32"
 
 #define GNU_USER_DYNAMIC_LINKER                                                
\
   CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER,  \
@@ -90,6 +92,9 @@ see the files COPYING3 and COPYING.RUNTIME respectively.  If 
not, see
 #define GNU_USER_DYNAMIC_LINKER64                                      \
   CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER64, UCLIBC_DYNAMIC_LINKER64, \
                         BIONIC_DYNAMIC_LINKER64)
+#define GNU_USER_DYNAMIC_LINKERX32                                     \
+  CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKERX32, UCLIBC_DYNAMIC_LINKERX32, \
+                        BIONIC_DYNAMIC_LINKERX32)
 
 /* Determine whether the entire c99 runtime
    is present in the runtime library.  */
diff --git a/gcc/configure.ac b/gcc/configure.ac
index 70b3dbc..4713264 100644
--- a/gcc/configure.ac
+++ b/gcc/configure.ac
@@ -611,6 +611,16 @@ AC_ARG_ENABLE(multilib,
 [], [enable_multilib=yes])
 AC_SUBST(enable_multilib)
 
+# With x32 support
+AC_ARG_ENABLE(x32,
+[  --enable-x32            enable x32 library support for multiple ABIs],
+[], [enable_x32=no])
+
+# With ia32 support
+AC_ARG_ENABLE(ia32,
+[  --enable-ia32           enable ia32 library support for multiple ABIs],
+[], [enable_ia32=yes])
+
 # Enable __cxa_atexit for C++.
 AC_ARG_ENABLE(__cxa_atexit,
 [AS_HELP_STRING([--enable-__cxa_atexit], [enable __cxa_atexit for C++])],
diff --git a/gcc/doc/install.texi b/gcc/doc/install.texi
index 7ebcd92..f63094c 100644
--- a/gcc/doc/install.texi
+++ b/gcc/doc/install.texi
@@ -1155,6 +1155,16 @@ assumptions made by the configure test are incorrect.
 Specify that the target does not support TLS.
 This is an alias for @option{--enable-tls=no}.
 
+@item --enable-ia32
+This option enables ia32 library support for multiple ABIs.  By
+default, ia32 library support is enabled.  It is only supported for
+x86-64.
+
+@item --enable-x32
+This option enables x32 library support for multiple ABIs. By
+default, x32 library support is disabled.  It is only supported for
+x86-64.
+
 @item --with-cpu=@var{cpu}
 @itemx --with-cpu-32=@var{cpu}
 @itemx --with-cpu-64=@var{cpu}
diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index e747f1d..a111236 100644
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -610,7 +610,7 @@ Objective-C and Objective-C++ Dialects}.
 -mpc32 -mpc64 -mpc80 -mstackrealign @gol
 -momit-leaf-frame-pointer  -mno-red-zone -mno-tls-direct-seg-refs @gol
 -mcmodel=@var{code-model} -mabi=@var{name} @gol
--m32  -m64 -mlarge-data-threshold=@var{num} @gol
+-m32 -m64 -mx32 -mlarge-data-threshold=@var{num} @gol
 -msse2avx -mfentry -m8bit-idiv @gol
 -mavx256-split-unaligned-load -mavx256-split-unaligned-store}
 
@@ -12837,15 +12837,19 @@ on AMD x86-64 processors in 64-bit environments.
 @table @gcctabopt
 @item -m32
 @itemx -m64
+@itemx -mx32
 @opindex m32
 @opindex m64
+@opindex mx32
 Generate code for a 32-bit or 64-bit environment.
-The 32-bit environment sets int, long and pointer to 32 bits and
+The @option{-m32} option sets int, long and pointer to 32 bits and
 generates code that runs on any i386 system.
-The 64-bit environment sets int to 32 bits and long and pointer
-to 64 bits and generates code for AMD's x86-64 architecture. For
-darwin only the -m64 option turns off the @option{-fno-pic} and
-@option{-mdynamic-no-pic} options.
+The @option{-m64} option sets int to 32 bits and long and pointer
+to 64 bits and generates code for AMD's x86-64 architecture.
+The @option{-mx32} option sets int, long and pointer to 32 bits and
+generates code for AMD's x86-64 architecture.
+For darwin only the @option{-m64} option turns off the @option{-fno-pic}
+and @option{-mdynamic-no-pic} options.
 
 @item -mno-red-zone
 @opindex mno-red-zone

Reply via email to