Here's the new patch. I downloaded the gcc sources from the SVN repository, removed the extra semicolon from my version of the files and re-generated the patch using svn diff, making sure the context info had all the tabs from the original. I then e-mailed the patch to myself as an attachment, applied it to the fresh SVN sources by doing patch --dry-run -p0 < cfi-svn.patch and checked that the compilation and tests were successful.
Index: libgcc/config/arm/ieee754-df.S =================================================================== --- libgcc/config/arm/ieee754-df.S (revision 223171) +++ libgcc/config/arm/ieee754-df.S (working copy) @@ -33,8 +33,12 @@ * Only the default rounding mode is intended for best performances. * Exceptions aren't supported yet, but that can be added quite easily * if necessary without impacting performances. + * + * In the CFI related comments, 'previousOffset' refers to the previous offset + * from sp used to compute the CFA. */ + .cfi_sections .debug_frame #ifndef __ARMEB__ #define xl r0 @@ -53,11 +57,13 @@ ARM_FUNC_START negdf2 ARM_FUNC_ALIAS aeabi_dneg negdf2 + CFI_START_FUNCTION @ flip sign bit eor xh, xh, #0x80000000 RET + CFI_END_FUNCTION FUNC_END aeabi_dneg FUNC_END negdf2 @@ -66,6 +72,7 @@ #ifdef L_arm_addsubdf3 ARM_FUNC_START aeabi_drsub + CFI_START_FUNCTION eor xh, xh, #0x80000000 @ flip sign bit of first arg b 1f @@ -81,7 +88,11 @@ ARM_FUNC_START adddf3 ARM_FUNC_ALIAS aeabi_dadd adddf3 -1: do_push {r4, r5, lr} +1: do_push {r4, r5, lr} @ sp -= 12 + .cfi_adjust_cfa_offset 12 @ CFA is now sp + previousOffset + 12 + .cfi_rel_offset r4, 0 @ Registers are saved from sp to sp + 8 + .cfi_rel_offset r5, 4 + .cfi_rel_offset lr, 8 @ Look for zeroes, equal values, INF, or NAN. shift1 lsl, r4, xh, #1 @@ -148,6 +159,11 @@ @ Since this is not common case, rescale them off line. teq r4, r5 beq LSYM(Lad_d) + +@ CFI note: we're lucky that the branches to Lad_* that appear after this function +@ have a CFI state that's exactly the same as the one we're in at this +@ point. Otherwise the CFI would change to a different state after the branch, +@ which would be disastrous for backtracing. LSYM(Lad_x): @ Compensate for the exponent overlapping the mantissa MSB added later @@ -413,6 +429,7 @@ orrne xh, xh, #0x00080000 @ quiet NAN RETLDM "r4, r5" + CFI_END_FUNCTION FUNC_END aeabi_dsub FUNC_END subdf3 FUNC_END aeabi_dadd @@ -420,12 +437,19 @@ ARM_FUNC_START floatunsidf ARM_FUNC_ALIAS aeabi_ui2d floatunsidf + CFI_START_FUNCTION teq r0, #0 do_it eq, t moveq r1, #0 RETc(eq) - do_push {r4, r5, lr} + + do_push {r4, r5, lr} @ sp -= 12 + .cfi_adjust_cfa_offset 12 @ CFA is now sp + previousOffset + 12 + .cfi_rel_offset r4, 0 @ Registers are saved from sp + 0 to sp + 8. + .cfi_rel_offset r5, 4 + .cfi_rel_offset lr, 8 + mov r4, #0x400 @ initial exponent add r4, r4, #(52-1 - 1) mov r5, #0 @ sign bit is 0 @@ -435,17 +459,25 @@ mov xh, #0 b LSYM(Lad_l) + CFI_END_FUNCTION FUNC_END aeabi_ui2d FUNC_END floatunsidf ARM_FUNC_START floatsidf ARM_FUNC_ALIAS aeabi_i2d floatsidf + CFI_START_FUNCTION teq r0, #0 do_it eq, t moveq r1, #0 RETc(eq) - do_push {r4, r5, lr} + + do_push {r4, r5, lr} @ sp -= 12 + .cfi_adjust_cfa_offset 12 @ CFA is now sp + previousOffset + 12 + .cfi_rel_offset r4, 0 @ Registers are saved from sp + 0 to sp + 8. + .cfi_rel_offset r5, 4 + .cfi_rel_offset lr, 8 + mov r4, #0x400 @ initial exponent add r4, r4, #(52-1 - 1) ands r5, r0, #0x80000000 @ sign bit in r5 @@ -457,11 +489,13 @@ mov xh, #0 b LSYM(Lad_l) + CFI_END_FUNCTION FUNC_END aeabi_i2d FUNC_END floatsidf ARM_FUNC_START extendsfdf2 ARM_FUNC_ALIAS aeabi_f2d extendsfdf2 + CFI_START_FUNCTION movs r2, r0, lsl #1 @ toss sign bit mov xh, r2, asr #3 @ stretch exponent @@ -480,22 +514,34 @@ @ value was denormalized. We can normalize it now. do_push {r4, r5, lr} + .cfi_adjust_cfa_offset 12 @ CFA is now sp + previousOffset + 12 + .cfi_rel_offset r4, 0 @ Registers are saved from sp + 0 to sp + 8. + .cfi_rel_offset r5, 4 + .cfi_rel_offset lr, 8 + mov r4, #0x380 @ setup corresponding exponent and r5, xh, #0x80000000 @ move sign bit in r5 bic xh, xh, #0x80000000 b LSYM(Lad_l) + CFI_END_FUNCTION FUNC_END aeabi_f2d FUNC_END extendsfdf2 ARM_FUNC_START floatundidf ARM_FUNC_ALIAS aeabi_ul2d floatundidf + CFI_START_FUNCTION + .cfi_remember_state @ Save the current CFA state. orrs r2, r0, r1 do_it eq RETc(eq) - do_push {r4, r5, lr} + do_push {r4, r5, lr} @ sp -= 12 + .cfi_adjust_cfa_offset 12 @ CFA is now sp + previousOffset + 12 + .cfi_rel_offset r4, 0 @ Registers are saved from sp + 0 to sp + 8 + .cfi_rel_offset r5, 4 + .cfi_rel_offset lr, 8 mov r5, #0 b 2f @@ -502,12 +548,20 @@ ARM_FUNC_START floatdidf ARM_FUNC_ALIAS aeabi_l2d floatdidf + .cfi_restore_state + @ Restore the CFI state we saved above. If we didn't do this then the + @ following instructions would have the CFI state that was set by the + @ offset adjustments made in floatundidf. orrs r2, r0, r1 do_it eq RETc(eq) - do_push {r4, r5, lr} + do_push {r4, r5, lr} @ sp -= 12 + .cfi_adjust_cfa_offset 12 @ CFA is now sp + previousOffset + 12 + .cfi_rel_offset r4, 0 @ Registers are saved from sp to sp + 8 + .cfi_rel_offset r5, 4 + .cfi_rel_offset lr, 8 ands r5, ah, #0x80000000 @ sign bit in r5 bpl 2f @@ -550,6 +604,7 @@ add r4, r4, r2 b LSYM(Lad_p) + CFI_END_FUNCTION FUNC_END floatdidf FUNC_END aeabi_l2d FUNC_END floatundidf @@ -561,8 +616,15 @@ ARM_FUNC_START muldf3 ARM_FUNC_ALIAS aeabi_dmul muldf3 - do_push {r4, r5, r6, lr} + CFI_START_FUNCTION + do_push {r4, r5, r6, lr} @ sp -= 16 + .cfi_adjust_cfa_offset 16 @ CFA is now sp + previousOffset + 16 + .cfi_rel_offset r4, 0 @ Registers are saved from sp to sp + 12. + .cfi_rel_offset r5, 4 + .cfi_rel_offset r6, 8 + .cfi_rel_offset lr, 12 + @ Mask out exponents, trap any zero/denormal/INF/NAN. mov ip, #0xff orr ip, ip, #0x700 @@ -596,7 +658,16 @@ and r6, r6, #0x80000000 @ Well, no way to make it shorter without the umull instruction. - stmfd sp!, {r6, r7, r8, r9, sl, fp} + stmfd sp!, {r6, r7, r8, r9, sl, fp} @ sp -= 24 + .cfi_remember_state @ Save the current CFI state. + .cfi_adjust_cfa_offset 24 @ CFA is now sp + previousOffset + 24. + .cfi_rel_offset r6, 0 @ Registers are saved from sp to sp + 20. + .cfi_rel_offset r7, 4 + .cfi_rel_offset r8, 8 + .cfi_rel_offset r9, 12 + .cfi_rel_offset sl, 16 + .cfi_rel_offset fp, 20 + mov r7, xl, lsr #16 mov r8, yl, lsr #16 mov r9, xh, lsr #16 @@ -648,8 +719,8 @@ mul fp, xh, yh adcs r5, r5, fp adc r6, r6, #0 - ldmfd sp!, {yl, r7, r8, r9, sl, fp} - + ldmfd sp!, {yl, r7, r8, r9, sl, fp} @ sp += 24 + .cfi_restore_state @ Restore the previous CFI state. #else @ Here is the actual multiplication. @@ -715,7 +786,6 @@ orr xh, xh, #0x00100000 mov lr, #0 subs r4, r4, #1 - LSYM(Lml_u): @ Overflow? bgt LSYM(Lml_o) @@ -863,13 +933,20 @@ orr xh, xh, #0x00f80000 RETLDM "r4, r5, r6" + CFI_END_FUNCTION FUNC_END aeabi_dmul FUNC_END muldf3 ARM_FUNC_START divdf3 ARM_FUNC_ALIAS aeabi_ddiv divdf3 + CFI_START_FUNCTION do_push {r4, r5, r6, lr} + .cfi_adjust_cfa_offset 16 + .cfi_rel_offset r4, 0 + .cfi_rel_offset r5, 4 + .cfi_rel_offset r6, 8 + .cfi_rel_offset lr, 12 @ Mask out exponents, trap any zero/denormal/INF/NAN. mov ip, #0xff @@ -1052,6 +1129,7 @@ bne LSYM(Lml_z) @ 0 / <non_zero> -> 0 b LSYM(Lml_n) @ 0 / 0 -> NAN + CFI_END_FUNCTION FUNC_END aeabi_ddiv FUNC_END divdf3 @@ -1063,6 +1141,7 @@ ARM_FUNC_START gtdf2 ARM_FUNC_ALIAS gedf2 gtdf2 + CFI_START_FUNCTION mov ip, #-1 b 1f @@ -1077,6 +1156,10 @@ mov ip, #1 @ how should we specify unordered here? 1: str ip, [sp, #-4]! + .cfi_adjust_cfa_offset 4 @ CFA is now sp + previousOffset + 4. + @ We're not adding CFI for ip as it's pushed into the stack only because + @ it may be popped off later as a return value (i.e. we're not preserving + @ it anyways). @ Trap any INF/NAN first. mov ip, xh, lsl #1 @@ -1085,10 +1168,18 @@ do_it ne COND(mvn,s,ne) ip, ip, asr #21 beq 3f + .cfi_remember_state + @ Save the current CFI state. This is done because the branch is conditional, + @ and if we don't take it we'll issue a .cfi_adjust_cfa_offset and return. + @ If we do take it, however, the .cfi_adjust_cfa_offset from the non-branch + @ code will affect the branch code as well. To avoid this we'll restore + @ the current state before executing the branch code. @ Test for equality. @ Note that 0.0 is equal to -0.0. 2: add sp, sp, #4 + .cfi_adjust_cfa_offset -4 @ CFA is now sp + previousOffset. + orrs ip, xl, xh, lsl #1 @ if x == 0.0 or -0.0 do_it eq, e COND(orr,s,eq) ip, yl, yh, lsl #1 @ and y == 0.0 or -0.0 @@ -1117,8 +1208,13 @@ orr r0, r0, #1 RET - @ Look for a NAN. -3: mov ip, xh, lsl #1 +3: @ Look for a NAN. + + @ Restore the previous CFI state (i.e. keep the CFI state as it was + @ before the branch). + .cfi_restore_state + + mov ip, xh, lsl #1 mvns ip, ip, asr #21 bne 4f orrs ip, xl, xh, lsl #12 @@ -1128,9 +1224,13 @@ bne 2b orrs ip, yl, yh, lsl #12 beq 2b @ y is not NAN + 5: ldr r0, [sp], #4 @ unordered return code + .cfi_adjust_cfa_offset -4 @ CFA is now sp + previousOffset. + RET + CFI_END_FUNCTION FUNC_END gedf2 FUNC_END gtdf2 FUNC_END ledf2 @@ -1140,6 +1240,7 @@ FUNC_END cmpdf2 ARM_FUNC_START aeabi_cdrcmple + CFI_START_FUNCTION mov ip, r0 mov r0, r2 @@ -1149,12 +1250,15 @@ mov r3, ip b 6f -ARM_FUNC_START aeabi_cdcmpeq ARM_FUNC_ALIAS aeabi_cdcmple aeabi_cdcmpeq @ The status-returning routines are required to preserve all @ registers except ip, lr, and cpsr. 6: do_push {r0, lr} + .cfi_adjust_cfa_offset 8 @ CFA is now sp + previousOffset + 8. + .cfi_rel_offset r0, 0 @ Previous r0 is saved at sp. + .cfi_rel_offset lr, 4 @ Previous lr is saved at sp + 4. + ARM_CALL cmpdf2 @ Set the Z flag correctly, and the C flag unconditionally. cmp r0, #0 @@ -1162,26 +1266,38 @@ @ that the first operand was smaller than the second. do_it mi cmnmi r0, #0 + RETLDM "r0" + CFI_END_FUNCTION FUNC_END aeabi_cdcmple FUNC_END aeabi_cdcmpeq FUNC_END aeabi_cdrcmple ARM_FUNC_START aeabi_dcmpeq + CFI_START_FUNCTION - str lr, [sp, #-8]! + str lr, [sp, #-8]! @ sp -= 8 + .cfi_adjust_cfa_offset 8 @ CFA is now sp + previousOffset + 8 + .cfi_rel_offset lr, 0 @ lr is at sp + ARM_CALL aeabi_cdcmple do_it eq, e moveq r0, #1 @ Equal to. movne r0, #0 @ Less than, greater than, or unordered. + RETLDM + CFI_END_FUNCTION FUNC_END aeabi_dcmpeq ARM_FUNC_START aeabi_dcmplt + CFI_START_FUNCTION - str lr, [sp, #-8]! + str lr, [sp, #-8]! @ sp -= 8 + .cfi_adjust_cfa_offset 8 @ CFA is now sp + previousOffset + 8 + .cfi_rel_offset lr, 0 @ lr is at sp + ARM_CALL aeabi_cdcmple do_it cc, e movcc r0, #1 @ Less than. @@ -1188,11 +1304,16 @@ movcs r0, #0 @ Equal to, greater than, or unordered. RETLDM + CFI_END_FUNCTION FUNC_END aeabi_dcmplt ARM_FUNC_START aeabi_dcmple + CFI_START_FUNCTION - str lr, [sp, #-8]! + str lr, [sp, #-8]! @ sp -= 8 + .cfi_adjust_cfa_offset 8 @ CFA is now sp + previousOffset + 8 + .cfi_rel_offset lr, 0 @ lr is at sp + ARM_CALL aeabi_cdcmple do_it ls, e movls r0, #1 @ Less than or equal to. @@ -1199,11 +1320,16 @@ movhi r0, #0 @ Greater than or unordered. RETLDM + CFI_END_FUNCTION FUNC_END aeabi_dcmple ARM_FUNC_START aeabi_dcmpge + CFI_START_FUNCTION - str lr, [sp, #-8]! + str lr, [sp, #-8]! @ sp -= 8 + .cfi_adjust_cfa_offset 8 @ CFA is now sp + previousOffset + 8 + .cfi_rel_offset lr, 0 @ lr is at sp + ARM_CALL aeabi_cdrcmple do_it ls, e movls r0, #1 @ Operand 2 is less than or equal to operand 1. @@ -1210,11 +1336,16 @@ movhi r0, #0 @ Operand 2 greater than operand 1, or unordered. RETLDM + CFI_END_FUNCTION FUNC_END aeabi_dcmpge ARM_FUNC_START aeabi_dcmpgt + CFI_START_FUNCTION - str lr, [sp, #-8]! + str lr, [sp, #-8]! @ sp -= 8 + .cfi_adjust_cfa_offset 8 @ CFA is now sp + previousOffset + 8 + .cfi_rel_offset lr, 0 @ lr is at sp + ARM_CALL aeabi_cdrcmple do_it cc, e movcc r0, #1 @ Operand 2 is less than operand 1. @@ -1222,6 +1353,7 @@ @ or they are unordered. RETLDM + CFI_END_FUNCTION FUNC_END aeabi_dcmpgt #endif /* L_cmpdf2 */ @@ -1230,6 +1362,7 @@ ARM_FUNC_START unorddf2 ARM_FUNC_ALIAS aeabi_dcmpun unorddf2 + .cfi_startproc mov ip, xh, lsl #1 mvns ip, ip, asr #21 @@ -1247,6 +1380,7 @@ 3: mov r0, #1 @ arguments are unordered. RET + .cfi_endproc FUNC_END aeabi_dcmpun FUNC_END unorddf2 @@ -1256,6 +1390,7 @@ ARM_FUNC_START fixdfsi ARM_FUNC_ALIAS aeabi_d2iz fixdfsi + CFI_START_FUNCTION @ check exponent range. mov r2, xh, lsl #1 @@ -1289,6 +1424,7 @@ 4: mov r0, #0 @ How should we convert NAN? RET + CFI_END_FUNCTION FUNC_END aeabi_d2iz FUNC_END fixdfsi @@ -1298,6 +1434,7 @@ ARM_FUNC_START fixunsdfsi ARM_FUNC_ALIAS aeabi_d2uiz fixunsdfsi + CFI_START_FUNCTION @ check exponent range. movs r2, xh, lsl #1 @@ -1327,6 +1464,7 @@ 4: mov r0, #0 @ How should we convert NAN? RET + CFI_END_FUNCTION FUNC_END aeabi_d2uiz FUNC_END fixunsdfsi @@ -1336,6 +1474,7 @@ ARM_FUNC_START truncdfsf2 ARM_FUNC_ALIAS aeabi_d2f truncdfsf2 + CFI_START_FUNCTION @ check exponent range. mov r2, xh, lsl #1 @@ -1400,6 +1539,7 @@ orr r0, r0, #0x00800000 RET + CFI_END_FUNCTION FUNC_END aeabi_d2f FUNC_END truncdfsf2 Index: libgcc/config/arm/ieee754-sf.S =================================================================== --- libgcc/config/arm/ieee754-sf.S (revision 223171) +++ libgcc/config/arm/ieee754-sf.S (working copy) @@ -31,6 +31,9 @@ * Only the default rounding mode is intended for best performances. * Exceptions aren't supported yet, but that can be added quite easily * if necessary without impacting performances. + * + * In the CFI related comments, 'previousOffset' refers to the previous offset + * from sp used to compute the CFA. */ #ifdef L_arm_negsf2 @@ -37,10 +40,12 @@ ARM_FUNC_START negsf2 ARM_FUNC_ALIAS aeabi_fneg negsf2 + CFI_START_FUNCTION eor r0, r0, #0x80000000 @ flip sign bit RET + CFI_END_FUNCTION FUNC_END aeabi_fneg FUNC_END negsf2 @@ -49,6 +54,7 @@ #ifdef L_arm_addsubsf3 ARM_FUNC_START aeabi_frsub + CFI_START_FUNCTION eor r0, r0, #0x80000000 @ flip sign bit of first arg b 1f @@ -284,6 +290,7 @@ orrne r0, r0, #0x00400000 @ quiet NAN RET + CFI_END_FUNCTION FUNC_END aeabi_frsub FUNC_END aeabi_fadd FUNC_END addsf3 @@ -292,6 +299,7 @@ ARM_FUNC_START floatunsisf ARM_FUNC_ALIAS aeabi_ui2f floatunsisf + CFI_START_FUNCTION mov r3, #0 b 1f @@ -316,6 +324,7 @@ mov al, #0 b 2f + CFI_END_FUNCTION FUNC_END aeabi_i2f FUNC_END floatsisf FUNC_END aeabi_ui2f @@ -323,6 +332,7 @@ ARM_FUNC_START floatundisf ARM_FUNC_ALIAS aeabi_ul2f floatundisf + CFI_START_FUNCTION orrs r2, r0, r1 do_it eq @@ -409,6 +419,7 @@ biceq r0, r0, ip, lsr #31 RET + CFI_END_FUNCTION FUNC_END floatdisf FUNC_END aeabi_l2f FUNC_END floatundisf @@ -420,6 +431,7 @@ ARM_FUNC_START mulsf3 ARM_FUNC_ALIAS aeabi_fmul mulsf3 + CFI_START_FUNCTION @ Mask out exponents, trap any zero/denormal/INF/NAN. mov ip, #0xff @@ -454,7 +466,13 @@ and r3, ip, #0x80000000 @ Well, no way to make it shorter without the umull instruction. - do_push {r3, r4, r5} + do_push {r3, r4, r5} @ sp -= 12 + .cfi_remember_state @ Save the current CFI state + .cfi_adjust_cfa_offset 12 @ CFA is now sp + previousOffset + 12 + .cfi_rel_offset r3, 0 @ Registers are saved from sp to sp + 8 + .cfi_rel_offset r4, 4 + .cfi_rel_offset r5, 8 + mov r4, r0, lsr #16 mov r5, r1, lsr #16 bic r0, r0, r4, lsl #16 @@ -465,7 +483,8 @@ mla r0, r4, r1, r0 adds r3, r3, r0, lsl #16 adc r1, ip, r0, lsr #16 - do_pop {r0, r4, r5} + do_pop {r0, r4, r5} @ sp += 12 + .cfi_restore_state @ Restore the previous CFI state #else @@ -618,11 +637,13 @@ orr r0, r0, #0x00c00000 RET + CFI_END_FUNCTION FUNC_END aeabi_fmul FUNC_END mulsf3 ARM_FUNC_START divsf3 ARM_FUNC_ALIAS aeabi_fdiv divsf3 + CFI_START_FUNCTION @ Mask out exponents, trap any zero/denormal/INF/NAN. mov ip, #0xff @@ -758,6 +779,7 @@ bne LSYM(Lml_z) @ 0 / <non_zero> -> 0 b LSYM(Lml_n) @ 0 / 0 -> NAN + CFI_END_FUNCTION FUNC_END aeabi_fdiv FUNC_END divsf3 @@ -782,6 +804,7 @@ ARM_FUNC_START gtsf2 ARM_FUNC_ALIAS gesf2 gtsf2 + CFI_START_FUNCTION mov ip, #-1 b 1f @@ -796,6 +819,10 @@ mov ip, #1 @ how should we specify unordered here? 1: str ip, [sp, #-4]! + .cfi_adjust_cfa_offset 4 @ CFA is now sp + previousOffset + 4. + @ We're not adding CFI for ip as it's pushed into the stack only because + @ it may be popped off later as a return value (i.e. we're not preserving + @ it anyways). @ Trap any INF/NAN first. mov r2, r0, lsl #1 @@ -804,10 +831,18 @@ do_it ne COND(mvn,s,ne) ip, r3, asr #24 beq 3f + .cfi_remember_state + @ Save the current CFI state. This is done because the branch is conditional, + @ and if we don't take it we'll issue a .cfi_adjust_cfa_offset and return. + @ If we do take it, however, the .cfi_adjust_cfa_offset from the non-branch + @ code will affect the branch code as well. To avoid this we'll restore + @ the current state before executing the branch code. @ Compare values. @ Note that 0.0 is equal to -0.0. 2: add sp, sp, #4 + .cfi_adjust_cfa_offset -4 @ CFA is now sp + previousOffset. + orrs ip, r2, r3, lsr #1 @ test if both are 0, clear C flag do_it ne teqne r0, r1 @ if not 0 compare sign @@ -823,8 +858,13 @@ orrne r0, r0, #1 RET - @ Look for a NAN. -3: mvns ip, r2, asr #24 +3: @ Look for a NAN. + + @ Restore the previous CFI state (i.e. keep the CFI state as it was + @ before the branch). + .cfi_restore_state + + mvns ip, r2, asr #24 bne 4f movs ip, r0, lsl #9 bne 5f @ r0 is NAN @@ -832,9 +872,12 @@ bne 2b movs ip, r1, lsl #9 beq 2b @ r1 is not NAN + 5: ldr r0, [sp], #4 @ return unordered code. + .cfi_adjust_cfa_offset -4 @ CFA is now sp + previousOffset. RET + CFI_END_FUNCTION FUNC_END gesf2 FUNC_END gtsf2 FUNC_END lesf2 @@ -844,6 +887,7 @@ FUNC_END cmpsf2 ARM_FUNC_START aeabi_cfrcmple + CFI_START_FUNCTION mov ip, r0 mov r0, r1 @@ -856,6 +900,13 @@ @ The status-returning routines are required to preserve all @ registers except ip, lr, and cpsr. 6: do_push {r0, r1, r2, r3, lr} + .cfi_adjust_cfa_offset 20 @ CFA is at sp + previousOffset + 20 + .cfi_rel_offset r0, 0 @ Registers are saved from sp to sp + 16 + .cfi_rel_offset r1, 4 + .cfi_rel_offset r2, 8 + .cfi_rel_offset r3, 12 + .cfi_rel_offset lr, 16 + ARM_CALL cmpsf2 @ Set the Z flag correctly, and the C flag unconditionally. cmp r0, #0 @@ -865,13 +916,18 @@ cmnmi r0, #0 RETLDM "r0, r1, r2, r3" + CFI_END_FUNCTION FUNC_END aeabi_cfcmple FUNC_END aeabi_cfcmpeq FUNC_END aeabi_cfrcmple ARM_FUNC_START aeabi_fcmpeq + CFI_START_FUNCTION - str lr, [sp, #-8]! + str lr, [sp, #-8]! @ sp -= 8 + .cfi_adjust_cfa_offset 8 @ CFA is now sp + previousOffset + 8 + .cfi_rel_offset lr, 0 @ lr is at sp + ARM_CALL aeabi_cfcmple do_it eq, e moveq r0, #1 @ Equal to. @@ -878,11 +934,16 @@ movne r0, #0 @ Less than, greater than, or unordered. RETLDM + CFI_END_FUNCTION FUNC_END aeabi_fcmpeq ARM_FUNC_START aeabi_fcmplt + CFI_START_FUNCTION - str lr, [sp, #-8]! + str lr, [sp, #-8]! @ sp -= 8 + .cfi_adjust_cfa_offset 8 @ CFA is now sp + previousOffset + 8 + .cfi_rel_offset lr, 0 @ lr is at sp + ARM_CALL aeabi_cfcmple do_it cc, e movcc r0, #1 @ Less than. @@ -889,11 +950,16 @@ movcs r0, #0 @ Equal to, greater than, or unordered. RETLDM + CFI_END_FUNCTION FUNC_END aeabi_fcmplt ARM_FUNC_START aeabi_fcmple + CFI_START_FUNCTION - str lr, [sp, #-8]! + str lr, [sp, #-8]! @ sp -= 8 + .cfi_adjust_cfa_offset 8 @ CFA is now sp + previousOffset + 8 + .cfi_rel_offset lr, 0 @ lr is at sp + ARM_CALL aeabi_cfcmple do_it ls, e movls r0, #1 @ Less than or equal to. @@ -900,11 +966,16 @@ movhi r0, #0 @ Greater than or unordered. RETLDM + CFI_END_FUNCTION FUNC_END aeabi_fcmple ARM_FUNC_START aeabi_fcmpge + CFI_START_FUNCTION - str lr, [sp, #-8]! + str lr, [sp, #-8]! @ sp -= 8 + .cfi_adjust_cfa_offset 8 @ CFA is now sp + previousOffset + 8 + .cfi_rel_offset lr, 0 @ lr is at sp + ARM_CALL aeabi_cfrcmple do_it ls, e movls r0, #1 @ Operand 2 is less than or equal to operand 1. @@ -911,11 +982,16 @@ movhi r0, #0 @ Operand 2 greater than operand 1, or unordered. RETLDM + CFI_END_FUNCTION FUNC_END aeabi_fcmpge ARM_FUNC_START aeabi_fcmpgt + CFI_START_FUNCTION - str lr, [sp, #-8]! + str lr, [sp, #-8]! @ sp -= 8 + .cfi_adjust_cfa_offset 8 @ CFA is now sp + previousOffset + 8 + .cfi_rel_offset lr, 0 @ lr is at sp + ARM_CALL aeabi_cfrcmple do_it cc, e movcc r0, #1 @ Operand 2 is less than operand 1. @@ -923,6 +999,7 @@ @ or they are unordered. RETLDM + CFI_END_FUNCTION FUNC_END aeabi_fcmpgt #endif /* L_cmpsf2 */ @@ -931,6 +1008,7 @@ ARM_FUNC_START unordsf2 ARM_FUNC_ALIAS aeabi_fcmpun unordsf2 + CFI_START_FUNCTION mov r2, r0, lsl #1 mov r3, r1, lsl #1 @@ -947,6 +1025,7 @@ 3: mov r0, #1 @ arguments are unordered. RET + CFI_END_FUNCTION FUNC_END aeabi_fcmpun FUNC_END unordsf2 @@ -956,6 +1035,7 @@ ARM_FUNC_START fixsfsi ARM_FUNC_ALIAS aeabi_f2iz fixsfsi + CFI_START_FUNCTION @ check exponent range. mov r2, r0, lsl #1 @@ -989,6 +1069,7 @@ 4: mov r0, #0 @ What should we convert NAN to? RET + CFI_END_FUNCTION FUNC_END aeabi_f2iz FUNC_END fixsfsi @@ -998,6 +1079,7 @@ ARM_FUNC_START fixunssfsi ARM_FUNC_ALIAS aeabi_f2uiz fixunssfsi + CFI_START_FUNCTION @ check exponent range. movs r2, r0, lsl #1 @@ -1027,6 +1109,7 @@ 4: mov r0, #0 @ What should we convert NAN to? RET + CFI_END_FUNCTION FUNC_END aeabi_f2uiz FUNC_END fixunssfsi Index: libgcc/config/arm/lib1funcs.S =================================================================== --- libgcc/config/arm/lib1funcs.S (revision 223171) +++ libgcc/config/arm/lib1funcs.S (working copy) @@ -1965,6 +1965,16 @@ #endif /* Arch supports thumb. */ +.macro CFI_START_FUNCTION + .cfi_startproc + .cfi_remember_state +.endm + +.macro CFI_END_FUNCTION + .cfi_restore_state + .cfi_endproc +.endm + #ifndef __symbian__ #ifndef __ARM_ARCH_6M__ #include "ieee754-df.S"