Hi!

The previous patch apparently isn't enough for TImode, because
we don't even allow the CONST_WIDE_INT operands in there, it uses
"e" constraint and similar predicate.  All we care about is that
both of the words of the argument can be expressed as addq/adcq/subq/sbbq
immediates, so this patch adds new predicates and new constraint for
that purpose.  Suggestions for better names for those appreciated.

Bootstrapped/regtested on x86_64-linux and i686-linux, ok for stage1
(while the previous patch looks simple enough that I'd like to see it in
6.x, this one IMHO can wait).

2016-04-01  Jakub Jelinek  <ja...@redhat.com>

        PR rtl-optimization/70467
        * config/i386/predicates.md (x86_64_double_int_operand,
        x86_64_double_general_operand): New predicates.
        * config/i386/constraints.md (Wd): New constraint.
        * config/i386/i386.md (mode attr di): Use Wd instead of e.
        (double_general_operand): New mode attr.
        (add<mode>3, sub<mode>3): Use <double_general_operand>
        instead of <general_operand>.
        (*add<dwi>3_doubleword, *sub<dwi>3_doubleword): Use
        x86_64_double_general_operand instead of <general_operand>.

        * gcc.target/i386/pr70467-3.c: New test.
        * gcc.target/i386/pr70467-4.c: New test.

--- gcc/config/i386/predicates.md.jj    2016-01-07 09:42:39.000000000 +0100
+++ gcc/config/i386/predicates.md       2016-04-01 11:48:17.640386878 +0200
@@ -332,6 +332,27 @@ (define_predicate "x86_64_zext_immediate
   return false;
 })
 
+;; Return true if VALUE is a constant integer whose low and high words satisfy
+;; x86_64_immediate_operand.
+(define_predicate "x86_64_double_int_operand"
+  (match_code "const_int,const_wide_int")
+{
+  switch (GET_CODE (op))
+    {
+    case CONST_INT:
+      return x86_64_immediate_operand (op, mode);
+
+    case CONST_WIDE_INT:
+      return (x86_64_immediate_operand (simplify_subreg (DImode, op, TImode,
+                                                        0), DImode)
+             && x86_64_immediate_operand (simplify_subreg (DImode, op, TImode,
+                                                           8), DImode));
+
+    default:
+      gcc_unreachable ();
+    }
+})
+
 ;; Return true if size of VALUE can be stored in a sign
 ;; extended immediate field.
 (define_predicate "x86_64_immediate_size_operand"
@@ -347,6 +368,14 @@ (define_predicate "x86_64_general_operan
         (match_operand 0 "x86_64_immediate_operand"))
     (match_operand 0 "general_operand")))
 
+;; Return true if OP's both words are general operands representable
+;; on x86_64.
+(define_predicate "x86_64_double_general_operand"
+  (if_then_else (match_test "TARGET_64BIT")
+    (ior (match_operand 0 "nonimmediate_operand")
+        (match_operand 0 "x86_64_double_int_operand"))
+    (match_operand 0 "general_operand")))
+
 ;; Return true if OP is non-VOIDmode general operand representable
 ;; on x86_64.  This predicate is used in sign-extending conversion
 ;; operations that require non-VOIDmode immediate operands.
--- gcc/config/i386/constraints.md.jj   2016-01-29 21:32:56.000000000 +0100
+++ gcc/config/i386/constraints.md      2016-04-01 11:19:44.633921527 +0200
@@ -266,6 +266,11 @@ (define_constraint "Wz"
   (and (match_operand 0 "x86_64_zext_immediate_operand")
        (match_test "GET_MODE (op) != VOIDmode")))
 
+(define_constraint "Wd"
+  "128-bit integer constant where both the high and low 64-bit word
+   of it satisfies the e constraint."
+  (match_operand 0 "x86_64_double_int_operand"))
+
 (define_constraint "Z"
   "32-bit unsigned integer constant, or a symbolic reference known
    to fit that range (for immediate operands in zero-extending x86-64
--- gcc/config/i386/i386.md.jj  2016-03-31 17:33:36.000000000 +0200
+++ gcc/config/i386/i386.md     2016-04-01 11:29:40.705729897 +0200
@@ -1071,7 +1071,7 @@ (define_mode_attr i [(QI "n") (HI "n") (
 (define_mode_attr g [(QI "qmn") (HI "rmn") (SI "rme") (DI "rme")])
 
 ;; Immediate operand constraint for double integer modes.
-(define_mode_attr di [(SI "nF") (DI "e")])
+(define_mode_attr di [(SI "nF") (DI "Wd")])
 
 ;; Immediate operand constraint for shifts.
 (define_mode_attr S [(QI "I") (HI "I") (SI "I") (DI "J") (TI "O")])
@@ -1084,6 +1084,15 @@ (define_mode_attr general_operand
         (DI "x86_64_general_operand")
         (TI "x86_64_general_operand")])
 
+;; General operand predicate for integer modes, where for TImode
+;; we need both words of the operand to be general operands.
+(define_mode_attr double_general_operand
+       [(QI "general_operand")
+        (HI "general_operand")
+        (SI "x86_64_general_operand")
+        (DI "x86_64_general_operand")
+        (TI "x86_64_double_general_operand")])
+
 ;; General sign extend operand predicate for integer modes,
 ;; which disallows VOIDmode operands and thus it is suitable
 ;; for use inside sign_extend.
@@ -5423,7 +5432,7 @@ (define_insn_and_split "*lea<mode>"
 (define_expand "add<mode>3"
   [(set (match_operand:SDWIM 0 "nonimmediate_operand")
        (plus:SDWIM (match_operand:SDWIM 1 "nonimmediate_operand")
-                   (match_operand:SDWIM 2 "<general_operand>")))]
+                   (match_operand:SDWIM 2 "<double_general_operand>")))]
   ""
   "ix86_expand_binary_operator (PLUS, <MODE>mode, operands); DONE;")
 
@@ -5431,7 +5440,8 @@ (define_insn_and_split "*add<dwi>3_doubl
   [(set (match_operand:<DWI> 0 "nonimmediate_operand" "=r,o")
        (plus:<DWI>
          (match_operand:<DWI> 1 "nonimmediate_operand" "%0,0")
-         (match_operand:<DWI> 2 "<general_operand>" "ro<di>,r<di>")))
+         (match_operand:<DWI> 2 "x86_64_double_general_operand"
+                                                       "ro<di>,r<di>")))
    (clobber (reg:CC FLAGS_REG))]
   "ix86_binary_operator_ok (PLUS, <DWI>mode, operands)"
   "#"
@@ -6362,7 +6372,7 @@ (define_insn_and_split "*lea_general_4"
 (define_expand "sub<mode>3"
   [(set (match_operand:SDWIM 0 "nonimmediate_operand")
        (minus:SDWIM (match_operand:SDWIM 1 "nonimmediate_operand")
-                    (match_operand:SDWIM 2 "<general_operand>")))]
+                    (match_operand:SDWIM 2 "<double_general_operand>")))]
   ""
   "ix86_expand_binary_operator (MINUS, <MODE>mode, operands); DONE;")
 
@@ -6370,7 +6380,8 @@ (define_insn_and_split "*sub<dwi>3_doubl
   [(set (match_operand:<DWI> 0 "nonimmediate_operand" "=r,o")
        (minus:<DWI>
          (match_operand:<DWI> 1 "nonimmediate_operand" "0,0")
-         (match_operand:<DWI> 2 "<general_operand>" "ro<di>,r<di>")))
+         (match_operand:<DWI> 2 "x86_64_double_general_operand"
+                                                       "ro<di>,r<di>")))
    (clobber (reg:CC FLAGS_REG))]
   "ix86_binary_operator_ok (MINUS, <MODE>mode, operands)"
   "#"
--- gcc/testsuite/gcc.target/i386/pr70467-3.c.jj        2016-04-01 
12:39:53.613101661 +0200
+++ gcc/testsuite/gcc.target/i386/pr70467-3.c   2016-04-01 12:44:30.747330485 
+0200
@@ -0,0 +1,19 @@
+/* PR rtl-optimization/70467 */
+/* { dg-do compile { target int128 } } */
+/* { dg-options "-O2" } */
+
+__uint128_t
+foo (__uint128_t x)
+{
+  return x + ((__uint128_t) 123456 << 64);
+}
+
+__uint128_t
+bar (__uint128_t x)
+{
+  return x - ((__uint128_t) 123456 << 64);
+}
+
+/* Make sure there are no unnecessary additions with carry.  */
+/* { dg-final { scan-assembler-not "adcq\[^\n\r\]*%" } } */
+/* { dg-final { scan-assembler-not "sbbq\[^\n\r\]*%" } } */
--- gcc/testsuite/gcc.target/i386/pr70467-4.c.jj        2016-04-01 
12:40:01.567993391 +0200
+++ gcc/testsuite/gcc.target/i386/pr70467-4.c   2016-04-01 12:43:58.067775153 
+0200
@@ -0,0 +1,18 @@
+/* PR rtl-optimization/70467 */
+/* { dg-do compile { target int128 } } */
+/* { dg-options "-O2" } */
+
+__uint128_t
+foo (__uint128_t x)
+{
+  return x + ((__uint128_t) 123456 << 64) + 0x1234567;
+}
+
+__uint128_t
+bar (__uint128_t x)
+{
+  return x - ((__uint128_t) 123456 << 64) + 0x1234567;
+}
+
+/* Make sure the immediates are not loaded into registers first.  */
+/* { dg-final { scan-assembler-not "mov\[lq\]\[ \t\]*.\[0-9-\]" } } */

        Jakub

Reply via email to