On 10/20/16 06:42, Jeff Law wrote:
>> On 6/4/16 21:25, cheng...@emindsoft.com.cn wrote:
>>> From: Chen Gang <gang.chen.5...@gmail.com>
>>>
>>> r10 may also be as parameter stack pointer for the nested function, so
>>> need save it before call mcount.
>>>
>>> Also clean up code: use '!' instead of "== 0" for checking
>>> static_chain_decl and compute_total_frame_size.
>>>
>>> 2016-06-04 Chen Gang <gang.chen.5...@gmail.com>
>>>
>>> gcc/
>>> PR target/71331
>>> * config/tilegx/tilegx.c (tilegx_function_profiler): Save r10
>>> to stack before call mcount.
>>> (tilegx_can_use_return_insn_p): Clean up code.
> So if I understand the tilegx architecture correctly, you're issuing the r10
> save & sp adjustment as a bundle, and the restore & sp adjustment as a bundle.
>
> The problem is the semantics of bunding on the tilegx effectively mean that
> all source operands are read in parallel, then all outputs occur in parallel.
>
> So if we take the bundle
>
> {addi sp,sp,-8 ; st sp, r10}
>
> The address used for the st is the value of the stack pointer before the addi
> instruction.
>
> Similarly for the restore r10 bundle. The address used for the load is sp
> before adjustment.
>
> Given my understanding of the tilegx bundling semantics, that seems wrong.
>
> Jeff
>
The comments on 1st page of "TILE-Gx Instruction Set Architecture":
Individual instructions within a bundle must comply with certain register
semantics. Read-after-write (RAW) dependencies are enforced between instruction
bundles. There is no ordering within a bundle, and the numbering of pipelines
or instruction slots within a bundle is only used for convenience and does not
imply any ordering. Within an instruction bundle, it is valid to encode an
output operand that is the same as an input operand. Because there is
explicitly no implied dependency within a bundle, the semantics for this
specify that the input operands for all instructions in a bundle are read
before any of the output operands are written.
Write-after-write (WAW) semantics between two bundles are defined as: the
latest write over-writes earlier writes.
Within a bundle, WAW dependencies are forbidden. If more than one instruction
in a bundle writes to the same output operand register, unpredictable results
for any destination operand within that bundle can occur. Also, implementations
are free to signal this case as an illegal instruction. There is one exception
to this rule—multiple instructions within a bundle may legally target the zero
register. Lastly, some instructions, such as instructions that implicitly write
the link register, implicitly write registers. If an instruction implicitly
writes to a register that another instruction in the same bundle writes to,
unpredictable results can occur for any output register used by that bundle
and/or an illegal instruction interrupt can occur.
On Page 221, ld instruction is:
ld Dest, Src
On Page 251, st instruction is:
st SrcA, SrcB
So for me:
Bundle {addi sp, sp, 8; ld r10, sp} is OK, it is RAW.
Bundle {addi sp, sp, -8; st sp, r10} is OK, too, it is RAW (not WAW --
both SrcA and SrcB are input operands).
Please help check, if need the related document, please let me know.
Thanks.
--
Chen Gang (陈刚)
Managing Natural Environments is the Duty of Human Beings.
