On Fri, 15 Jun 2018 at 17:22, Richard Earnshaw (lists) <richard.earns...@arm.com> wrote: > > On 15/06/18 15:30, Christophe Lyon wrote: > > Hello, > > > > As suggested in [1], the attached patch removes all definitions and > > uses of __ARM_ARCH__ and uses __ARM_ARCH instead. The later is indeed > > defined by the preprocessor to the appropriate value. > > > > I ran make check on arm-none-eabi (with A-profile multilib), > > arm-none-linux-gnueabi, arm-none-linux-gnueabihf (with cortex-a9, a15, > > a5, a57 and armtdmi as --with-cpu), armeb-none-linux-gnueabihf and > > armv8l-linux-gnueabihf, and noticed no regression. > > > > OK for trunk? > > > > Thanks, > > > > Christophe > > > > [1] https://gcc.gnu.org/ml/gcc-patches/2018-06/msg00445.html > > > > > > ARM_ARCH.chlog.txt > > > > > > libatomic/ChangeLog: > > > > 2018-06-15 Christophe Lyon <christophe.l...@linaro.org> > > > > * config/arm/arm-config.h (__ARM_ARCH__): Remove definitions, use > > __ARM_ARCH instead. > > > > libgcc/ChangeLog: > > > > 2018-06-15 Christophe Lyon <christophe.l...@linaro.org> > > > > * config/arm/lib1funcs.S (__ARM_ARCH__): Remove definitions, use > > __ARM_ARCH instead. > > * config/arm/ieee754-df.S: Use __ARM_ARCH instead of __ARM_ARCH__. > > * config/arm/ieee754-sf.S: Likewise. > > * config/arm/libunwind.S: Likewise. > > > > > > ARM_ARCH.patch.txt > > > > Thanks, this is a useful start. We can, however, go further. ACLE > defines a number of 'feature' pre-defines and we can use those to void > direct tests of the architecture version directly. For example, > __ARM_FEATURE_LDREX could directly replace having to calculate > HAVE_STREX and HAVE_STREXBHD. > Hi,
Here is an updated patch using __ARM_FEATURE_LDREX. I didn't find other opportunities to use ACLE pre-defines, did I miss any? Thanks, Christophe > From a quick look it looks like the only one we can't really support > with the new tests is the check for DMB. I'll have a chat with the ACLE > maintainers about that... > > R. > > > > > diff --git a/libatomic/config/arm/arm-config.h > > b/libatomic/config/arm/arm-config.h > > index c0504be..ce8ff0e 100644 > > --- a/libatomic/config/arm/arm-config.h > > +++ b/libatomic/config/arm/arm-config.h > > @@ -23,57 +23,15 @@ > > <http://www.gnu.org/licenses/>. */ > > > > > > -#if defined(__ARM_ARCH_2__) > > -# define __ARM_ARCH__ 2 > > -#endif > > - > > -#if defined(__ARM_ARCH_3__) > > -# define __ARM_ARCH__ 3 > > -#endif > > - > > -#if defined(__ARM_ARCH_3M__) || defined(__ARM_ARCH_4__) \ > > - || defined(__ARM_ARCH_4T__) > > -/* We use __ARM_ARCH__ set to 4 here, but in reality it's any processor > > with > > - long multiply instructions. That includes v3M. */ > > -# define __ARM_ARCH__ 4 > > -#endif > > - > > -#if defined(__ARM_ARCH_5__) || defined(__ARM_ARCH_5T__) \ > > - || defined(__ARM_ARCH_5E__) || defined(__ARM_ARCH_5TE__) \ > > - || defined(__ARM_ARCH_5TEJ__) > > -# define __ARM_ARCH__ 5 > > -#endif > > - > > -#if defined(__ARM_ARCH_6__) || defined(__ARM_ARCH_6J__) \ > > - || defined(__ARM_ARCH_6K__) || defined(__ARM_ARCH_6Z__) \ > > - || defined(__ARM_ARCH_6ZK__) || defined(__ARM_ARCH_6T2__) \ > > - || defined(__ARM_ARCH_6M__) > > -# define __ARM_ARCH__ 6 > > -#endif > > - > > -#if defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) \ > > - || defined(__ARM_ARCH_7R__) || defined(__ARM_ARCH_7M__) \ > > - || defined(__ARM_ARCH_7EM__) > > -# define __ARM_ARCH__ 7 > > -#endif > > - > > -#if defined(__ARM_ARCH_8A__) > > -# define __ARM_ARCH__ 8 > > -#endif > > - > > -#ifndef __ARM_ARCH__ > > -#error Unable to determine architecture. > > -#endif > > - > > -#if __ARM_ARCH__ >= 7 || defined(__ARM_ARCH_6K__) || > > defined(__ARM_ARCH_6ZK__) > > +#if __ARM_ARCH >= 7 || defined(__ARM_ARCH_6K__) || > > defined(__ARM_ARCH_6ZK__) > > # define HAVE_STREX 1 > > # define HAVE_STREXBHD 1 > > -#elif __ARM_ARCH__ == 6 > > +#elif __ARM_ARCH == 6 > > # define HAVE_STREX 1 > > #endif > > > > -#if __ARM_ARCH__ >= 7 > > +#if __ARM_ARCH >= 7 > > # define HAVE_DMB 1 > > -#elif __ARM_ARCH__ == 6 > > +#elif __ARM_ARCH == 6 > > # define HAVE_DMB_MCR 1 > > #endif > > diff --git a/libgcc/config/arm/lib1funcs.S b/libgcc/config/arm/lib1funcs.S > > index 04c1b77..264d54a 100644 > > --- a/libgcc/config/arm/lib1funcs.S > > +++ b/libgcc/config/arm/lib1funcs.S > > @@ -74,49 +74,6 @@ see the files COPYING3 and COPYING.RUNTIME respectively. > > If not, see > > > > /* Function end macros. Variants for interworking. */ > > > > -#if defined(__ARM_ARCH_2__) > > -# define __ARM_ARCH__ 2 > > -#endif > > - > > -#if defined(__ARM_ARCH_3__) > > -# define __ARM_ARCH__ 3 > > -#endif > > - > > -#if defined(__ARM_ARCH_3M__) || defined(__ARM_ARCH_4__) \ > > - || defined(__ARM_ARCH_4T__) > > -/* We use __ARM_ARCH__ set to 4 here, but in reality it's any processor > > with > > - long multiply instructions. That includes v3M. */ > > -# define __ARM_ARCH__ 4 > > -#endif > > - > > -#if defined(__ARM_ARCH_5__) || defined(__ARM_ARCH_5T__) \ > > - || defined(__ARM_ARCH_5E__) || defined(__ARM_ARCH_5TE__) \ > > - || defined(__ARM_ARCH_5TEJ__) > > -# define __ARM_ARCH__ 5 > > -#endif > > - > > -#if defined(__ARM_ARCH_6__) || defined(__ARM_ARCH_6J__) \ > > - || defined(__ARM_ARCH_6K__) || defined(__ARM_ARCH_6Z__) \ > > - || defined(__ARM_ARCH_6ZK__) || defined(__ARM_ARCH_6T2__) \ > > - || defined(__ARM_ARCH_6M__) > > -# define __ARM_ARCH__ 6 > > -#endif > > - > > -#if defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) \ > > - || defined(__ARM_ARCH_7R__) || defined(__ARM_ARCH_7M__) \ > > - || defined(__ARM_ARCH_7EM__) > > -# define __ARM_ARCH__ 7 > > -#endif > > - > > -#if defined(__ARM_ARCH_8A__) || defined(__ARM_ARCH_8M_BASE__) \ > > - || defined(__ARM_ARCH_8M_MAIN__) || defined(__ARM_ARCH_8R__) > > -# define __ARM_ARCH__ 8 > > -#endif > > - > > -#ifndef __ARM_ARCH__ > > -#error Unable to determine architecture. > > -#endif > > - > > /* There are times when we might prefer Thumb1 code even if ARM code is > > permitted, for example, the code might be smaller, or there might be > > interworking problems with switching to ARM state if interworking is > > @@ -135,13 +92,13 @@ see the files COPYING3 and COPYING.RUNTIME > > respectively. If not, see > > > > /* How to return from a function call depends on the architecture variant. > > */ > > > > -#if (__ARM_ARCH__ > 4) || defined(__ARM_ARCH_4T__) > > +#if (__ARM_ARCH > 4) || defined(__ARM_ARCH_4T__) > > > > # define RET bx lr > > # define RETc(x) bx##x lr > > > > /* Special precautions for interworking on armv4t. */ > > -# if (__ARM_ARCH__ == 4) > > +# if (__ARM_ARCH == 4) > > > > /* Always use bx, not ldr pc. */ > > # if (defined(__thumb__) || defined(__THUMB_INTERWORK__)) > > @@ -544,7 +501,7 @@ pc .req r15 > > /* > > ------------------------------------------------------------------------ */ > > .macro ARM_DIV_BODY dividend, divisor, result, curbit > > > > -#if __ARM_ARCH__ >= 5 && ! defined (__OPTIMIZE_SIZE__) > > +#if __ARM_ARCH >= 5 && ! defined (__OPTIMIZE_SIZE__) > > > > #if defined (__thumb2__) > > clz \curbit, \dividend > > @@ -584,8 +541,8 @@ pc .req r15 > > .endr > > #endif > > > > -#else /* __ARM_ARCH__ < 5 || defined (__OPTIMIZE_SIZE__) */ > > -#if __ARM_ARCH__ >= 5 > > +#else /* __ARM_ARCH < 5 || defined (__OPTIMIZE_SIZE__) */ > > +#if __ARM_ARCH >= 5 > > > > clz \curbit, \divisor > > clz \result, \dividend > > @@ -595,7 +552,7 @@ pc .req r15 > > mov \curbit, \curbit, lsl \result > > mov \result, #0 > > > > -#else /* __ARM_ARCH__ < 5 */ > > +#else /* __ARM_ARCH < 5 */ > > > > @ Initially shift the divisor left 3 bits if possible, > > @ set curbit accordingly. This allows for curbit to be located > > @@ -626,7 +583,7 @@ pc .req r15 > > > > mov \result, #0 > > > > -#endif /* __ARM_ARCH__ < 5 */ > > +#endif /* __ARM_ARCH < 5 */ > > > > @ Division loop > > 1: cmp \dividend, \divisor > > @@ -651,13 +608,13 @@ pc .req r15 > > movne \divisor, \divisor, lsr #4 > > bne 1b > > > > -#endif /* __ARM_ARCH__ < 5 || defined (__OPTIMIZE_SIZE__) */ > > +#endif /* __ARM_ARCH < 5 || defined (__OPTIMIZE_SIZE__) */ > > > > .endm > > /* > > ------------------------------------------------------------------------ */ > > .macro ARM_DIV2_ORDER divisor, order > > > > -#if __ARM_ARCH__ >= 5 > > +#if __ARM_ARCH >= 5 > > > > clz \order, \divisor > > rsb \order, \order, #31 > > @@ -687,7 +644,7 @@ pc .req r15 > > /* > > ------------------------------------------------------------------------ */ > > .macro ARM_MOD_BODY dividend, divisor, order, spare > > > > -#if __ARM_ARCH__ >= 5 && ! defined (__OPTIMIZE_SIZE__) > > +#if __ARM_ARCH >= 5 && ! defined (__OPTIMIZE_SIZE__) > > > > clz \order, \divisor > > clz \spare, \dividend > > @@ -702,15 +659,15 @@ pc .req r15 > > subcs \dividend, \dividend, \divisor, lsl #shift > > .endr > > > > -#else /* __ARM_ARCH__ < 5 || defined (__OPTIMIZE_SIZE__) */ > > -#if __ARM_ARCH__ >= 5 > > +#else /* __ARM_ARCH < 5 || defined (__OPTIMIZE_SIZE__) */ > > +#if __ARM_ARCH >= 5 > > > > clz \order, \divisor > > clz \spare, \dividend > > sub \order, \order, \spare > > mov \divisor, \divisor, lsl \order > > > > -#else /* __ARM_ARCH__ < 5 */ > > +#else /* __ARM_ARCH < 5 */ > > > > mov \order, #0 > > > > @@ -732,7 +689,7 @@ pc .req r15 > > addlo \order, \order, #1 > > blo 1b > > > > -#endif /* __ARM_ARCH__ < 5 */ > > +#endif /* __ARM_ARCH < 5 */ > > > > @ Perform all needed substractions to keep only the reminder. > > @ Do comparisons in batch of 4 first. > > @@ -770,7 +727,7 @@ pc .req r15 > > subhs \dividend, \dividend, \divisor > > 5: > > > > -#endif /* __ARM_ARCH__ < 5 || defined (__OPTIMIZE_SIZE__) */ > > +#endif /* __ARM_ARCH < 5 || defined (__OPTIMIZE_SIZE__) */ > > > > .endm > > /* > > ------------------------------------------------------------------------ */ > > @@ -1560,7 +1517,7 @@ LSYM(Lover12): > > @ EABI GNU/Linux call to cacheflush syscall. > > ARM_FUNC_START clear_cache > > do_push {r7} > > -#if __ARM_ARCH__ >= 7 || defined(__ARM_ARCH_6T2__) > > +#if __ARM_ARCH >= 7 || defined(__ARM_ARCH_6T2__) > > movw r7, #2 > > movt r7, #0xf > > #else > > @@ -1701,8 +1658,8 @@ LSYM(Lover12): > > > > #if (__ARM_ARCH_ISA_THUMB == 2 \ > > || (__ARM_ARCH_ISA_ARM \ > > - && (__ARM_ARCH__ > 5 \ > > - || (__ARM_ARCH__ == 5 && __ARM_ARCH_ISA_THUMB)))) > > + && (__ARM_ARCH > 5 \ > > + || (__ARM_ARCH == 5 && __ARM_ARCH_ISA_THUMB)))) > > #define HAVE_ARM_CLZ 1 > > #endif > > > > @@ -1887,7 +1844,7 @@ ARM_FUNC_START ctzsi2 > > not support Thumb instructions. (This can be a multilib option). */ > > #if defined __ARM_ARCH_4T__ || defined __ARM_ARCH_5T__\ > > || defined __ARM_ARCH_5TE__ || defined __ARM_ARCH_5TEJ__ \ > > - || __ARM_ARCH__ >= 6 > > + || __ARM_ARCH >= 6 > > > > #if defined L_call_via_rX > > > > diff --git a/libgcc/config/arm/ieee754-df.S b/libgcc/config/arm/ieee754-df.S > > index 570e5f6..7c5260e 100644 > > --- a/libgcc/config/arm/ieee754-df.S > > +++ b/libgcc/config/arm/ieee754-df.S > > @@ -245,7 +245,7 @@ LSYM(Lad_a): > > @ No rounding necessary since ip will always be 0 at this point. > > LSYM(Lad_l): > > > > -#if __ARM_ARCH__ < 5 > > +#if __ARM_ARCH < 5 > > > > teq xh, #0 > > movne r3, #20 > > @@ -656,7 +656,7 @@ ARM_FUNC_ALIAS aeabi_dmul muldf3 > > orr yh, yh, #0x00100000 > > beq LSYM(Lml_1) > > > > -#if __ARM_ARCH__ < 4 > > +#if __ARM_ARCH < 4 > > > > @ Put sign bit in r6, which will be restored in yl later. > > and r6, r6, #0x80000000 > > diff --git a/libgcc/config/arm/ieee754-sf.S b/libgcc/config/arm/ieee754-sf.S > > index dac3e2e..00a8d9c 100644 > > --- a/libgcc/config/arm/ieee754-sf.S > > +++ b/libgcc/config/arm/ieee754-sf.S > > @@ -175,7 +175,7 @@ LSYM(Lad_a): > > @ No rounding necessary since r1 will always be 0 at this point. > > LSYM(Lad_l): > > > > -#if __ARM_ARCH__ < 5 > > +#if __ARM_ARCH < 5 > > > > movs ip, r0, lsr #12 > > moveq r0, r0, lsl #12 > > @@ -370,7 +370,7 @@ ARM_FUNC_ALIAS aeabi_l2f floatdisf > > subeq r3, r3, #(32 << 23) > > 2: sub r3, r3, #(1 << 23) > > > > -#if __ARM_ARCH__ < 5 > > +#if __ARM_ARCH < 5 > > > > mov r2, #23 > > cmp ip, #(1 << 16) > > @@ -460,7 +460,7 @@ LSYM(Lml_x): > > orr r0, r3, r0, lsr #5 > > orr r1, r3, r1, lsr #5 > > > > -#if __ARM_ARCH__ < 4 > > +#if __ARM_ARCH < 4 > > > > @ Put sign bit in r3, which will be restored into r0 later. > > and r3, ip, #0x80000000 > > diff --git a/libgcc/config/arm/libunwind.S b/libgcc/config/arm/libunwind.S > > index 3302447..50c58dc 100644 > > --- a/libgcc/config/arm/libunwind.S > > +++ b/libgcc/config/arm/libunwind.S > > @@ -46,7 +46,7 @@ > > EQUIV SYM (\name), SYM (__\name) > > .endm > > > > -#if (__ARM_ARCH__ == 4) > > +#if (__ARM_ARCH == 4) > > /* Some coprocessors require armv5t. We know this code will never be run > > on > > other cpus. Tell gas to allow armv5t, but only mark the objects as > > armv4. > > */ > > >
libatomic/ChangeLog: 2018-06-18 Christophe Lyon <christophe.l...@linaro.org> * config/arm/arm-config.h (__ARM_ARCH__): Remove definitions, use __ARM_ARCH instead. Use __ARM_FEATURE_LDREX to define HAVE_STREX and HAVE_STREXBHD libgcc/ChangeLog: 2018-06-18 Christophe Lyon <christophe.l...@linaro.org> * config/arm/lib1funcs.S (__ARM_ARCH__): Remove definitions, use __ARM_ARCH instead. * config/arm/ieee754-df.S: Use __ARM_ARCH instead of __ARM_ARCH__. * config/arm/ieee754-sf.S: Likewise. * config/arm/libunwind.S: Likewise.
diff --git a/libatomic/config/arm/arm-config.h b/libatomic/config/arm/arm-config.h index c0504be..b4783ad 100644 --- a/libatomic/config/arm/arm-config.h +++ b/libatomic/config/arm/arm-config.h @@ -23,57 +23,15 @@ <http://www.gnu.org/licenses/>. */ -#if defined(__ARM_ARCH_2__) -# define __ARM_ARCH__ 2 -#endif - -#if defined(__ARM_ARCH_3__) -# define __ARM_ARCH__ 3 -#endif - -#if defined(__ARM_ARCH_3M__) || defined(__ARM_ARCH_4__) \ - || defined(__ARM_ARCH_4T__) -/* We use __ARM_ARCH__ set to 4 here, but in reality it's any processor with - long multiply instructions. That includes v3M. */ -# define __ARM_ARCH__ 4 -#endif - -#if defined(__ARM_ARCH_5__) || defined(__ARM_ARCH_5T__) \ - || defined(__ARM_ARCH_5E__) || defined(__ARM_ARCH_5TE__) \ - || defined(__ARM_ARCH_5TEJ__) -# define __ARM_ARCH__ 5 -#endif - -#if defined(__ARM_ARCH_6__) || defined(__ARM_ARCH_6J__) \ - || defined(__ARM_ARCH_6K__) || defined(__ARM_ARCH_6Z__) \ - || defined(__ARM_ARCH_6ZK__) || defined(__ARM_ARCH_6T2__) \ - || defined(__ARM_ARCH_6M__) -# define __ARM_ARCH__ 6 -#endif - -#if defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) \ - || defined(__ARM_ARCH_7R__) || defined(__ARM_ARCH_7M__) \ - || defined(__ARM_ARCH_7EM__) -# define __ARM_ARCH__ 7 -#endif - -#if defined(__ARM_ARCH_8A__) -# define __ARM_ARCH__ 8 -#endif - -#ifndef __ARM_ARCH__ -#error Unable to determine architecture. -#endif - -#if __ARM_ARCH__ >= 7 || defined(__ARM_ARCH_6K__) || defined(__ARM_ARCH_6ZK__) +#if __ARM_FEATURE_LDREX & 4 # define HAVE_STREX 1 +#endif +#if (__ARM_FEATURE_LDREX & 0xF) == 0xF # define HAVE_STREXBHD 1 -#elif __ARM_ARCH__ == 6 -# define HAVE_STREX 1 #endif -#if __ARM_ARCH__ >= 7 +#if __ARM_ARCH >= 7 # define HAVE_DMB 1 -#elif __ARM_ARCH__ == 6 +#elif __ARM_ARCH == 6 # define HAVE_DMB_MCR 1 #endif diff --git a/libgcc/config/arm/ieee754-df.S b/libgcc/config/arm/ieee754-df.S index 570e5f6..7c5260e 100644 --- a/libgcc/config/arm/ieee754-df.S +++ b/libgcc/config/arm/ieee754-df.S @@ -245,7 +245,7 @@ LSYM(Lad_a): @ No rounding necessary since ip will always be 0 at this point. LSYM(Lad_l): -#if __ARM_ARCH__ < 5 +#if __ARM_ARCH < 5 teq xh, #0 movne r3, #20 @@ -656,7 +656,7 @@ ARM_FUNC_ALIAS aeabi_dmul muldf3 orr yh, yh, #0x00100000 beq LSYM(Lml_1) -#if __ARM_ARCH__ < 4 +#if __ARM_ARCH < 4 @ Put sign bit in r6, which will be restored in yl later. and r6, r6, #0x80000000 diff --git a/libgcc/config/arm/ieee754-sf.S b/libgcc/config/arm/ieee754-sf.S index dac3e2e..00a8d9c 100644 --- a/libgcc/config/arm/ieee754-sf.S +++ b/libgcc/config/arm/ieee754-sf.S @@ -175,7 +175,7 @@ LSYM(Lad_a): @ No rounding necessary since r1 will always be 0 at this point. LSYM(Lad_l): -#if __ARM_ARCH__ < 5 +#if __ARM_ARCH < 5 movs ip, r0, lsr #12 moveq r0, r0, lsl #12 @@ -370,7 +370,7 @@ ARM_FUNC_ALIAS aeabi_l2f floatdisf subeq r3, r3, #(32 << 23) 2: sub r3, r3, #(1 << 23) -#if __ARM_ARCH__ < 5 +#if __ARM_ARCH < 5 mov r2, #23 cmp ip, #(1 << 16) @@ -460,7 +460,7 @@ LSYM(Lml_x): orr r0, r3, r0, lsr #5 orr r1, r3, r1, lsr #5 -#if __ARM_ARCH__ < 4 +#if __ARM_ARCH < 4 @ Put sign bit in r3, which will be restored into r0 later. and r3, ip, #0x80000000 diff --git a/libgcc/config/arm/lib1funcs.S b/libgcc/config/arm/lib1funcs.S index 04c1b77..264d54a 100644 --- a/libgcc/config/arm/lib1funcs.S +++ b/libgcc/config/arm/lib1funcs.S @@ -74,49 +74,6 @@ see the files COPYING3 and COPYING.RUNTIME respectively. If not, see /* Function end macros. Variants for interworking. */ -#if defined(__ARM_ARCH_2__) -# define __ARM_ARCH__ 2 -#endif - -#if defined(__ARM_ARCH_3__) -# define __ARM_ARCH__ 3 -#endif - -#if defined(__ARM_ARCH_3M__) || defined(__ARM_ARCH_4__) \ - || defined(__ARM_ARCH_4T__) -/* We use __ARM_ARCH__ set to 4 here, but in reality it's any processor with - long multiply instructions. That includes v3M. */ -# define __ARM_ARCH__ 4 -#endif - -#if defined(__ARM_ARCH_5__) || defined(__ARM_ARCH_5T__) \ - || defined(__ARM_ARCH_5E__) || defined(__ARM_ARCH_5TE__) \ - || defined(__ARM_ARCH_5TEJ__) -# define __ARM_ARCH__ 5 -#endif - -#if defined(__ARM_ARCH_6__) || defined(__ARM_ARCH_6J__) \ - || defined(__ARM_ARCH_6K__) || defined(__ARM_ARCH_6Z__) \ - || defined(__ARM_ARCH_6ZK__) || defined(__ARM_ARCH_6T2__) \ - || defined(__ARM_ARCH_6M__) -# define __ARM_ARCH__ 6 -#endif - -#if defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) \ - || defined(__ARM_ARCH_7R__) || defined(__ARM_ARCH_7M__) \ - || defined(__ARM_ARCH_7EM__) -# define __ARM_ARCH__ 7 -#endif - -#if defined(__ARM_ARCH_8A__) || defined(__ARM_ARCH_8M_BASE__) \ - || defined(__ARM_ARCH_8M_MAIN__) || defined(__ARM_ARCH_8R__) -# define __ARM_ARCH__ 8 -#endif - -#ifndef __ARM_ARCH__ -#error Unable to determine architecture. -#endif - /* There are times when we might prefer Thumb1 code even if ARM code is permitted, for example, the code might be smaller, or there might be interworking problems with switching to ARM state if interworking is @@ -135,13 +92,13 @@ see the files COPYING3 and COPYING.RUNTIME respectively. If not, see /* How to return from a function call depends on the architecture variant. */ -#if (__ARM_ARCH__ > 4) || defined(__ARM_ARCH_4T__) +#if (__ARM_ARCH > 4) || defined(__ARM_ARCH_4T__) # define RET bx lr # define RETc(x) bx##x lr /* Special precautions for interworking on armv4t. */ -# if (__ARM_ARCH__ == 4) +# if (__ARM_ARCH == 4) /* Always use bx, not ldr pc. */ # if (defined(__thumb__) || defined(__THUMB_INTERWORK__)) @@ -544,7 +501,7 @@ pc .req r15 /* ------------------------------------------------------------------------ */ .macro ARM_DIV_BODY dividend, divisor, result, curbit -#if __ARM_ARCH__ >= 5 && ! defined (__OPTIMIZE_SIZE__) +#if __ARM_ARCH >= 5 && ! defined (__OPTIMIZE_SIZE__) #if defined (__thumb2__) clz \curbit, \dividend @@ -584,8 +541,8 @@ pc .req r15 .endr #endif -#else /* __ARM_ARCH__ < 5 || defined (__OPTIMIZE_SIZE__) */ -#if __ARM_ARCH__ >= 5 +#else /* __ARM_ARCH < 5 || defined (__OPTIMIZE_SIZE__) */ +#if __ARM_ARCH >= 5 clz \curbit, \divisor clz \result, \dividend @@ -595,7 +552,7 @@ pc .req r15 mov \curbit, \curbit, lsl \result mov \result, #0 -#else /* __ARM_ARCH__ < 5 */ +#else /* __ARM_ARCH < 5 */ @ Initially shift the divisor left 3 bits if possible, @ set curbit accordingly. This allows for curbit to be located @@ -626,7 +583,7 @@ pc .req r15 mov \result, #0 -#endif /* __ARM_ARCH__ < 5 */ +#endif /* __ARM_ARCH < 5 */ @ Division loop 1: cmp \dividend, \divisor @@ -651,13 +608,13 @@ pc .req r15 movne \divisor, \divisor, lsr #4 bne 1b -#endif /* __ARM_ARCH__ < 5 || defined (__OPTIMIZE_SIZE__) */ +#endif /* __ARM_ARCH < 5 || defined (__OPTIMIZE_SIZE__) */ .endm /* ------------------------------------------------------------------------ */ .macro ARM_DIV2_ORDER divisor, order -#if __ARM_ARCH__ >= 5 +#if __ARM_ARCH >= 5 clz \order, \divisor rsb \order, \order, #31 @@ -687,7 +644,7 @@ pc .req r15 /* ------------------------------------------------------------------------ */ .macro ARM_MOD_BODY dividend, divisor, order, spare -#if __ARM_ARCH__ >= 5 && ! defined (__OPTIMIZE_SIZE__) +#if __ARM_ARCH >= 5 && ! defined (__OPTIMIZE_SIZE__) clz \order, \divisor clz \spare, \dividend @@ -702,15 +659,15 @@ pc .req r15 subcs \dividend, \dividend, \divisor, lsl #shift .endr -#else /* __ARM_ARCH__ < 5 || defined (__OPTIMIZE_SIZE__) */ -#if __ARM_ARCH__ >= 5 +#else /* __ARM_ARCH < 5 || defined (__OPTIMIZE_SIZE__) */ +#if __ARM_ARCH >= 5 clz \order, \divisor clz \spare, \dividend sub \order, \order, \spare mov \divisor, \divisor, lsl \order -#else /* __ARM_ARCH__ < 5 */ +#else /* __ARM_ARCH < 5 */ mov \order, #0 @@ -732,7 +689,7 @@ pc .req r15 addlo \order, \order, #1 blo 1b -#endif /* __ARM_ARCH__ < 5 */ +#endif /* __ARM_ARCH < 5 */ @ Perform all needed substractions to keep only the reminder. @ Do comparisons in batch of 4 first. @@ -770,7 +727,7 @@ pc .req r15 subhs \dividend, \dividend, \divisor 5: -#endif /* __ARM_ARCH__ < 5 || defined (__OPTIMIZE_SIZE__) */ +#endif /* __ARM_ARCH < 5 || defined (__OPTIMIZE_SIZE__) */ .endm /* ------------------------------------------------------------------------ */ @@ -1560,7 +1517,7 @@ LSYM(Lover12): @ EABI GNU/Linux call to cacheflush syscall. ARM_FUNC_START clear_cache do_push {r7} -#if __ARM_ARCH__ >= 7 || defined(__ARM_ARCH_6T2__) +#if __ARM_ARCH >= 7 || defined(__ARM_ARCH_6T2__) movw r7, #2 movt r7, #0xf #else @@ -1701,8 +1658,8 @@ LSYM(Lover12): #if (__ARM_ARCH_ISA_THUMB == 2 \ || (__ARM_ARCH_ISA_ARM \ - && (__ARM_ARCH__ > 5 \ - || (__ARM_ARCH__ == 5 && __ARM_ARCH_ISA_THUMB)))) + && (__ARM_ARCH > 5 \ + || (__ARM_ARCH == 5 && __ARM_ARCH_ISA_THUMB)))) #define HAVE_ARM_CLZ 1 #endif @@ -1887,7 +1844,7 @@ ARM_FUNC_START ctzsi2 not support Thumb instructions. (This can be a multilib option). */ #if defined __ARM_ARCH_4T__ || defined __ARM_ARCH_5T__\ || defined __ARM_ARCH_5TE__ || defined __ARM_ARCH_5TEJ__ \ - || __ARM_ARCH__ >= 6 + || __ARM_ARCH >= 6 #if defined L_call_via_rX diff --git a/libgcc/config/arm/libunwind.S b/libgcc/config/arm/libunwind.S index 3302447..50c58dc 100644 --- a/libgcc/config/arm/libunwind.S +++ b/libgcc/config/arm/libunwind.S @@ -46,7 +46,7 @@ EQUIV SYM (\name), SYM (__\name) .endm -#if (__ARM_ARCH__ == 4) +#if (__ARM_ARCH == 4) /* Some coprocessors require armv5t. We know this code will never be run on other cpus. Tell gas to allow armv5t, but only mark the objects as armv4. */