[Dropping Jeff Law from the list since he already commented on the middle end parts]
Hi Kyrill, On Thu, 19 Jul 2018 at 12:02, Kyrill Tkachov <kyrylo.tkac...@foss.arm.com> wrote: > > Hi Thomas, > > On 17/07/18 12:02, Thomas Preudhomme wrote: > > Fixed in attached patch. ChangeLog entries are unchanged: > > > > *** gcc/ChangeLog *** > > > > 2018-07-05 Thomas Preud'homme <thomas.preudho...@linaro.org> > > > > PR target/85434 > > * target-insns.def (stack_protect_combined_set): Define new standard > > pattern name. > > (stack_protect_combined_test): Likewise. > > * cfgexpand.c (stack_protect_prologue): Try new > > stack_protect_combined_set pattern first. > > * function.c (stack_protect_epilogue): Try new > > stack_protect_combined_test pattern first. > > * config/arm/arm.c (require_pic_register): Add pic_reg and compute_now > > parameters to control which register to use as PIC register and force > > reloading PIC register respectively. > > (legitimize_pic_address): Expose above new parameters in prototype and > > adapt recursive calls accordingly. > > (arm_legitimize_address): Adapt to new legitimize_pic_address > > prototype. > > (thumb_legitimize_address): Likewise. > > (arm_emit_call_insn): Adapt to new require_pic_register prototype. > > * config/arm/arm-protos.h (legitimize_pic_address): Adapt to prototype > > change. > > * config/arm/arm.md (movsi expander): Adapt to legitimize_pic_address > > prototype change. > > (stack_protect_combined_set): New insn_and_split pattern. > > (stack_protect_set): New insn pattern. > > (stack_protect_combined_test): New insn_and_split pattern. > > (stack_protect_test): New insn pattern. > > * config/arm/unspecs.md (UNSPEC_SP_SET): New unspec. > > (UNSPEC_SP_TEST): Likewise. > > * doc/md.texi (stack_protect_combined_set): Document new standard > > pattern name. > > (stack_protect_set): Clarify that the operand for guard's address is > > legal. > > (stack_protect_combined_test): Document new standard pattern name. > > (stack_protect_test): Clarify that the operand for guard's address is > > legal. > > > > *** gcc/testsuite/ChangeLog *** > > > > 2018-07-05 Thomas Preud'homme <thomas.preudho...@linaro.org> > > > > PR target/85434 > > * gcc.target/arm/pr85434.c: New test. > > > > Sorry for the delay. Some comments inline. > > Kyrill > > diff --git a/gcc/cfgexpand.c b/gcc/cfgexpand.c > index d6e3c382085..d1a893ac56e 100644 > --- a/gcc/cfgexpand.c > +++ b/gcc/cfgexpand.c > @@ -6105,8 +6105,18 @@ stack_protect_prologue (void) > { > tree guard_decl = targetm.stack_protect_guard (); > rtx x, y; > + struct expand_operand ops[2]; > > x = expand_normal (crtl->stack_protect_guard); > + create_fixed_operand (&ops[0], x); > + create_fixed_operand (&ops[1], DECL_RTL (guard_decl)); > + /* Allow the target to compute address of Y and copy it to X without > + leaking Y into a register. This combined address + copy pattern allows > + the target to prevent spilling of any intermediate results by splitting > + it after register allocator. */ > + if (maybe_expand_insn (targetm.code_for_stack_protect_combined_set, 2, > ops)) > + return; > + > if (guard_decl) > y = expand_normal (guard_decl); > else > diff --git a/gcc/config/arm/arm-protos.h b/gcc/config/arm/arm-protos.h > index 8537262ce64..100844e659c 100644 > --- a/gcc/config/arm/arm-protos.h > +++ b/gcc/config/arm/arm-protos.h > @@ -67,7 +67,7 @@ extern int const_ok_for_dimode_op (HOST_WIDE_INT, enum > rtx_code); > extern int arm_split_constant (RTX_CODE, machine_mode, rtx, > HOST_WIDE_INT, rtx, rtx, int); > extern int legitimate_pic_operand_p (rtx); > -extern rtx legitimize_pic_address (rtx, machine_mode, rtx); > +extern rtx legitimize_pic_address (rtx, machine_mode, rtx, rtx, bool); > extern rtx legitimize_tls_address (rtx, rtx); > extern bool arm_legitimate_address_p (machine_mode, rtx, bool); > extern int arm_legitimate_address_outer_p (machine_mode, rtx, RTX_CODE, > int); > diff --git a/gcc/config/arm/arm.c b/gcc/config/arm/arm.c > index ec3abbcba9f..f4a970580c2 100644 > --- a/gcc/config/arm/arm.c > +++ b/gcc/config/arm/arm.c > @@ -7369,20 +7369,26 @@ legitimate_pic_operand_p (rtx x) > } > > /* Record that the current function needs a PIC register. Initialize > - cfun->machine->pic_reg if we have not already done so. */ > + cfun->machine->pic_reg if we have not already done so. > + > + If not NULL, PIC_REG indicates which register to use as PIC register, > + otherwise it is decided by register allocator. COMPUTE_NOW forces the PIC > + register to be loaded, irregardless of whether it was loaded previously. > */ > > static void > -require_pic_register (void) > +require_pic_register (rtx pic_reg, bool compute_now) > { > /* A lot of the logic here is made obscure by the fact that this > routine gets called as part of the rtx cost estimation process. > We don't want those calls to affect any assumptions about the real > function; and further, we can't call entry_of_function() until we > start the real expansion process. */ > - if (!crtl->uses_pic_offset_table) > + if (!crtl->uses_pic_offset_table || compute_now) > { > - gcc_assert (can_create_pseudo_p ()); > + gcc_assert (can_create_pseudo_p () > + || (pic_reg != NULL_RTX && GET_MODE (pic_reg) == Pmode)); > if (arm_pic_register != INVALID_REGNUM > + && can_create_pseudo_p () > && !(TARGET_THUMB1 && arm_pic_register > LAST_LO_REGNUM)) > { > if (!cfun->machine->pic_reg) > @@ -7399,7 +7405,8 @@ require_pic_register (void) > rtx_insn *seq, *insn; > > if (!cfun->machine->pic_reg) > - cfun->machine->pic_reg = gen_reg_rtx (Pmode); > + cfun->machine->pic_reg = > + can_create_pseudo_p () ? gen_reg_rtx (Pmode) : pic_reg; > > > I'll admit I'm not too familiar with this code, but don't you want to be > setting cfun->machine->pic_reg to the pic_reg that > was passed into this function (if pic_reg != NULL as per the function > comment)? Indeed the comment needs to be fixed. I think it only makes sense to specify a register after register allocation when the amount of register is finite. Before that I don't see why one would want to do that. I've changed the sentence about PIC_REG in the heading comment to: "A new pseudo register is used for the PIC register if possible, otherwise PIC_REG must be non NULL and is used instead." > > > /* Play games to avoid marking the function as needing pic > if we are being called as part of the cost-estimation > @@ -7410,7 +7417,8 @@ require_pic_register (void) > start_sequence (); > > if (TARGET_THUMB1 && arm_pic_register != INVALID_REGNUM > - && arm_pic_register > LAST_LO_REGNUM) > + && arm_pic_register > LAST_LO_REGNUM > + && can_create_pseudo_p ()) > emit_move_insn (cfun->machine->pic_reg, > gen_rtx_REG (Pmode, arm_pic_register)); > else > @@ -7427,15 +7435,29 @@ require_pic_register (void) > we can't yet emit instructions directly in the final > insn stream. Queue the insns on the entry edge, they will > be committed after everything else is expanded. */ > - insert_insn_on_edge (seq, > - single_succ_edge (ENTRY_BLOCK_PTR_FOR_FN > (cfun))); > + if (can_create_pseudo_p ()) > + insert_insn_on_edge (seq, > + single_succ_edge > + (ENTRY_BLOCK_PTR_FOR_FN (cfun))); > + else > + emit_insn (seq); > } > > It's not the capability for creating pseudos that is relevant here, but > whether we have an instruction > stream to insert insns on. Do you think that using currently_expanding_to_rtl > would work as a condition? Indeed it's not the right test. Do you mean testing if currently_expanding_to_rtl is false? I used can_create_pseudo_p because I knew the function could never be called when it was false before and thus my changes would only impact the code I was changing. > > > +/* Legimitize PIC load to ORIG into REG. If REG is NULL, a new pseudo is > > "Legitimize" > > + created to hold the result of the load. If not NULL, PIC_REG indicates > + which register to use as PIC register, otherwise it is decided by register > + allocator. COMPUTE_NOW forces the PIC register to be loaded at the > current > + location in the instruction stream, irregardless of whether it was loaded > + previously. > + > + Returns the register REG into which the PIC load is performed. */ > + > rtx > -legitimize_pic_address (rtx orig, machine_mode mode, rtx reg) > +legitimize_pic_address (rtx orig, machine_mode mode, rtx reg, rtx pic_reg, > + bool compute_now) > { > if (GET_CODE (orig) == SYMBOL_REF > || GET_CODE (orig) == LABEL_REF) > @@ -7469,7 +7491,7 @@ legitimize_pic_address (rtx orig, machine_mode mode, > rtx reg) > rtx mem; > > /* If this function doesn't have a pic register, create one now. */ > - require_pic_register (); > + require_pic_register (pic_reg, compute_now); > > pat = gen_calculate_pic_address (reg, cfun->machine->pic_reg, orig); > > @@ -7520,9 +7542,11 @@ legitimize_pic_address (rtx orig, machine_mode mode, > rtx reg) > > gcc_assert (GET_CODE (XEXP (orig, 0)) == PLUS); > > - base = legitimize_pic_address (XEXP (XEXP (orig, 0), 0), Pmode, reg); > + base = legitimize_pic_address (XEXP (XEXP (orig, 0), 0), Pmode, reg, > + pic_reg, compute_now); > offset = legitimize_pic_address (XEXP (XEXP (orig, 0), 1), Pmode, > - base == reg ? 0 : reg); > + base == reg ? 0 : reg, pic_reg, > + compute_now); > > if (CONST_INT_P (offset)) > { > @@ -8707,7 +8731,8 @@ arm_legitimize_address (rtx x, rtx orig_x, machine_mode > mode) > { > /* We need to find and carefully transform any SYMBOL and LABEL > references; so go back to the original address expression. */ > - rtx new_x = legitimize_pic_address (orig_x, mode, NULL_RTX); > + rtx new_x = legitimize_pic_address (orig_x, mode, NULL_RTX, NULL_RTX, > + false /*compute_now*/); > > if (new_x != orig_x) > x = new_x; > @@ -8775,7 +8800,8 @@ thumb_legitimize_address (rtx x, rtx orig_x, > machine_mode mode) > { > /* We need to find and carefully transform any SYMBOL and LABEL > references; so go back to the original address expression. */ > - rtx new_x = legitimize_pic_address (orig_x, mode, NULL_RTX); > + rtx new_x = legitimize_pic_address (orig_x, mode, NULL_RTX, NULL_RTX, > + false /*compute_now*/); > > if (new_x != orig_x) > x = new_x; > @@ -18059,7 +18085,7 @@ arm_emit_call_insn (rtx pat, rtx addr, bool sibcall) > ? !targetm.binds_local_p (SYMBOL_REF_DECL (addr)) > : !SYMBOL_REF_LOCAL_P (addr))) > { > - require_pic_register (); > + require_pic_register (NULL_RTX, false /*compute_now*/); > use_reg (&CALL_INSN_FUNCTION_USAGE (insn), cfun->machine->pic_reg); > } > > diff --git a/gcc/config/arm/arm.md b/gcc/config/arm/arm.md > index 361a02668b0..9582c3fbb11 100644 > --- a/gcc/config/arm/arm.md > +++ b/gcc/config/arm/arm.md > @@ -6021,7 +6021,8 @@ > operands[1] = legitimize_pic_address (operands[1], SImode, > (!can_create_pseudo_p () > ? operands[0] > - : 0)); > + : NULL_RTX), NULL_RTX, > + false /*compute_now*/); > } > " > ) > @@ -8634,6 +8635,95 @@ > (set_attr "conds" "clob")] > ) > > +;; Named patterns for stack smashing protection. > +(define_insn_and_split "stack_protect_combined_set" > + [(set (match_operand:SI 0 "memory_operand" "=m") > + (unspec:SI [(match_operand:SI 1 "general_operand" "X")] > + UNSPEC_SP_SET)) > + (match_scratch:SI 2 "=r") > + (match_scratch:SI 3 "=r")] > + "" > + "#" > + "reload_completed" > + [(parallel [(set (match_dup 0) (unspec:SI [(mem:SI (match_dup 2))] > + UNSPEC_SP_SET)) > + (clobber (match_dup 2))])] > + " > +{ > + rtx addr = XEXP (operands[1], 0); > > > I think you want to tighten the predicate of operands[1]. > general_operand is very, well, general, but you're taking its 0th subtree, > which it may not necessarily have. I was afraid you'd ask that. Yes indeed a better predicate should be used but I'm not sure all the possible cases here. However it has to be some sort of memory since this is the address of the guard. I think the problem with using memory_operand was that it could be a MEM of a SYMBOL_REF which is not legitimate at this point. > > + if (flag_pic) > + { > + /* Forces recomputing of GOT base now. */ > + operands[1] = legitimize_pic_address (addr, SImode, operands[2], > + operands[3], true > /*compute_now*/); > + } > + else > + { > + if (!address_operand (addr, SImode)) > + operands[1] = force_const_mem (SImode, addr); > + emit_move_insn (operands[2], operands[1]); > + } > +}" > +) > + > +(define_insn "stack_protect_set" > + [(set (match_operand:SI 0 "memory_operand" "=m") > + (unspec:SI [(mem:SI (match_operand:SI 1 "register_operand" "r"))] > + UNSPEC_SP_SET)) > + (clobber (match_dup 1))] > > I'm not familiar with this idiom, don't you instead want to mark the > constraint on operand 1 as earlyclobber (or read-write)? According to the documentation earlyclobber applies to operands being written to and this is an input operand only. As the doc says the earlyclobber indicates to the compiler that it cannot reuse a register used for an input operand to put the output operand into. Here I'm trying to express instead that the operand needs to be saved/restored if needed after this insn because it gets written to. This is only needed in Thumb-1 because stack_protect_set_combined and stack_protect_test_combined already use all registers available so I cannot ask for an extra clobber register. > > + "" > + "ldr\\t%1, [%1]\;str\\t%1, %0\;mov\t%1,0" > + [(set_attr "length" "12") > + (set_attr "type" "multiple")]) > + > +(define_insn_and_split "stack_protect_combined_test" > + [(set (pc) > + (if_then_else > + (eq (match_operand:SI 0 "memory_operand" "m") > + (unspec:SI [(match_operand:SI 1 "general_operand" "X")] > + UNSPEC_SP_TEST)) > + (label_ref (match_operand 2)) > + (pc))) > + (match_scratch:SI 3 "=r") > + (match_scratch:SI 4 "=r")] > + "" > + "#" > + "reload_completed" > + [(const_int 0)] > +{ > + rtx eq, addr; > + > + addr = XEXP (operands[1], 0); > > Same concern as with stack_protect_combined_set about operand 1 predicate > being too general. Will try to create a new predicate, thanks for raising this up. > > + if (flag_pic) > + { > + /* Forces recomputing of GOT base now. */ > + operands[1] = legitimize_pic_address (addr, SImode, operands[3], > + operands[4], > + true /*compute_now*/); > + } > + else > + { > + if (!address_operand (addr, SImode)) > + operands[1] = force_const_mem (SImode, addr); > + emit_move_insn (operands[3], operands[1]); > + } > + emit_insn (gen_stack_protect_test (operands[4], operands[0], operands[3])); > + eq = gen_rtx_EQ (VOIDmode, operands[4], const0_rtx); > + emit_jump_insn (gen_cbranchsi4 (eq, operands[4], const0_rtx, operands[2])); > + DONE; > +}) > + > +(define_insn "stack_protect_test" > + [(set (match_operand:SI 0 "register_operand" "=r") > + (unspec:SI [(match_operand:SI 1 "memory_operand" "m") > + (mem:SI (match_operand:SI 2 "register_operand" "r"))] > + UNSPEC_SP_TEST)) > + (clobber (match_dup 2))] > > Same concern on clobbering and constraints. Same answer :-) Best regards, Thomas > > + "" > + "ldr\t%0, [%2]\;ldr\t%2, %1\;eor\t%0, %2, %0" > + [(set_attr "length" "12") > + (set_attr "type" "multiple")]) > + > (define_expand "casesi" > [(match_operand:SI 0 "s_register_operand" "") ; index to jump on > (match_operand:SI 1 "const_int_operand" "") ; lower bound > diff --git a/gcc/config/arm/unspecs.md b/gcc/config/arm/unspecs.md > index b05f85e10e4..429c937df60 100644 > --- a/gcc/config/arm/unspecs.md > +++ b/gcc/config/arm/unspecs.md > @@ -86,6 +86,9 @@ > UNSPEC_PROBE_STACK ; Probe stack memory reference > UNSPEC_NONSECURE_MEM ; Represent non-secure memory in ARMv8-M with > ; security extension > + UNSPEC_SP_SET ; Represent the setting of stack protector's > canary > + UNSPEC_SP_TEST ; Represent the testing of stack protector's canary > + ; against the guard. > ]) > > (define_c_enum "unspec" [ > diff --git a/gcc/doc/md.texi b/gcc/doc/md.texi > index 734bc765387..f760da495bf 100644 > --- a/gcc/doc/md.texi > +++ b/gcc/doc/md.texi > @@ -7362,22 +7362,61 @@ builtins. > The get/set patterns have a single output/input operand respectively, > with @var{mode} intended to be @code{Pmode}. > > +@cindex @code{stack_protect_combined_set} instruction pattern > +@item @samp{stack_protect_combined_set} > +This pattern, if defined, moves a @code{ptr_mode} value from an address > +whose declaration RTX is given in operand 1 to the memory in operand 0 > +without leaving the value in a register afterward. If several > +instructions are needed by the target to perform the operation (eg. to > +load the address from a GOT entry then load the @code{ptr_mode} value > +and finally store it), it is the backend's responsibility to ensure no > +intermediate result gets spilled. This is to avoid leaking the value > +some place that an attacker might use to rewrite the stack guard slot > +after having clobbered it. > + > +If this pattern is not defined, then the address declaration is > +expanded first in the standard way and a @code{stack_protect_set} > +pattern is then generated to move the value from that address to the > +address in operand 0. > + > @cindex @code{stack_protect_set} instruction pattern > @item @samp{stack_protect_set} > -This pattern, if defined, moves a @code{ptr_mode} value from the memory > -in operand 1 to the memory in operand 0 without leaving the value in > -a register afterward. This is to avoid leaking the value some place > -that an attacker might use to rewrite the stack guard slot after > -having clobbered it. > +This pattern, if defined, moves a @code{ptr_mode} value from the valid > +memory location in operand 1 to the memory in operand 0 without leaving > +the value in a register afterward. This is to avoid leaking the value > +some place that an attacker might use to rewrite the stack guard slot > +after having clobbered it. > + > +Note: on targets where the addressing modes do not allow to load > +directly from stack guard address, the address is expanded in a standard > +way first which could cause some spills. > > If this pattern is not defined, then a plain move pattern is generated. > > +@cindex @code{stack_protect_combined_test} instruction pattern > +@item @samp{stack_protect_combined_test} > +This pattern, if defined, compares a @code{ptr_mode} value from an > +address whose declaration RTX is given in operand 1 with the memory in > +operand 0 without leaving the value in a register afterward and > +branches to operand 2 if the values were equal. If several > +instructions are needed by the target to perform the operation (eg. to > +load the address from a GOT entry then load the @code{ptr_mode} value > +and finally store it), it is the backend's responsibility to ensure no > +intermediate result gets spilled. This is to avoid leaking the value > +some place that an attacker might use to rewrite the stack guard slot > +after having clobbered it. > + > +If this pattern is not defined, then the address declaration is > +expanded first in the standard way and a @code{stack_protect_test} > +pattern is then generated to compare the value from that address to the > +value at the memory in operand 0. > + > @cindex @code{stack_protect_test} instruction pattern > @item @samp{stack_protect_test} > This pattern, if defined, compares a @code{ptr_mode} value from the > -memory in operand 1 with the memory in operand 0 without leaving the > -value in a register afterward and branches to operand 2 if the values > -were equal. > +valid memory location in operand 1 with the memory in operand 0 without > +leaving the value in a register afterward and branches to operand 2 if > +the values were equal. > > If this pattern is not defined, then a plain compare pattern and > conditional branch pattern is used. > diff --git a/gcc/function.c b/gcc/function.c > index 142cdaec2ce..bf96dd6feae 100644 > --- a/gcc/function.c > +++ b/gcc/function.c > @@ -4886,20 +4886,33 @@ stack_protect_epilogue (void) > rtx_code_label *label = gen_label_rtx (); > rtx x, y; > rtx_insn *seq; > + struct expand_operand ops[3]; > > x = expand_normal (crtl->stack_protect_guard); > - if (guard_decl) > - y = expand_normal (guard_decl); > - else > - y = const0_rtx; > - > - /* Allow the target to compare Y with X without leaking either into > - a register. */ > - if (targetm.have_stack_protect_test () > - && ((seq = targetm.gen_stack_protect_test (x, y, label)) != NULL_RTX)) > - emit_insn (seq); > - else > - emit_cmp_and_jump_insns (x, y, EQ, NULL_RTX, ptr_mode, 1, label); > + create_fixed_operand (&ops[0], x); > + create_fixed_operand (&ops[1], DECL_RTL (guard_decl)); > + create_fixed_operand (&ops[2], label); > + /* Allow the target to compute address of Y and compare it with X without > + leaking Y into a register. This combined address + compare pattern > allows > + the target to prevent spilling of any intermediate results by splitting > + it after register allocator. */ > + if (!maybe_expand_jump_insn (targetm.code_for_stack_protect_combined_test, > + 3, ops)) > + { > + if (guard_decl) > + y = expand_normal (guard_decl); > + else > + y = const0_rtx; > + > + /* Allow the target to compare Y with X without leaking either into > + a register. */ > + if (targetm.have_stack_protect_test () > + && ((seq = targetm.gen_stack_protect_test (x, y, label)) > + != NULL_RTX)) > + emit_insn (seq); > + else > + emit_cmp_and_jump_insns (x, y, EQ, NULL_RTX, ptr_mode, 1, label); > + } > > /* The noreturn predictor has been moved to the tree level. The rtl-level > predictors estimate this branch about 20%, which isn't enough to get > diff --git a/gcc/target-insns.def b/gcc/target-insns.def > index 9a552c3d11c..d39889b3522 100644 > --- a/gcc/target-insns.def > +++ b/gcc/target-insns.def > @@ -96,7 +96,9 @@ DEF_TARGET_INSN (sibcall_value, (rtx x0, rtx x1, rtx opt2, > rtx opt3, > DEF_TARGET_INSN (simple_return, (void)) > DEF_TARGET_INSN (split_stack_prologue, (void)) > DEF_TARGET_INSN (split_stack_space_check, (rtx x0, rtx x1)) > +DEF_TARGET_INSN (stack_protect_combined_set, (rtx x0, rtx x1)) > DEF_TARGET_INSN (stack_protect_set, (rtx x0, rtx x1)) > +DEF_TARGET_INSN (stack_protect_combined_test, (rtx x0, rtx x1, rtx x2)) > DEF_TARGET_INSN (stack_protect_test, (rtx x0, rtx x1, rtx x2)) > DEF_TARGET_INSN (store_multiple, (rtx x0, rtx x1, rtx x2)) > DEF_TARGET_INSN (tablejump, (rtx x0, rtx x1)) > diff --git a/gcc/testsuite/gcc.target/arm/pr85434.c > b/gcc/testsuite/gcc.target/arm/pr85434.c > new file mode 100644 > index 00000000000..4143a861f7c > --- /dev/null > +++ b/gcc/testsuite/gcc.target/arm/pr85434.c > @@ -0,0 +1,200 @@ > +/* { dg-do compile } */ > +/* { dg-require-effective-target fstack_protector }*/ > +/* { dg-require-effective-target fpic }*/ > +/* { dg-additional-options "-Os -fpic -fstack-protector-strong" } */ > + > +#include <stddef.h> > +#include <stdint.h> > + > + > +static const unsigned char base64_enc_map[64] = > +{ > + 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', 'I', 'J', > + 'K', 'L', 'M', 'N', 'O', 'P', 'Q', 'R', 'S', 'T', > + 'U', 'V', 'W', 'X', 'Y', 'Z', 'a', 'b', 'c', 'd', > + 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', > + 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', > + 'y', 'z', '0', '1', '2', '3', '4', '5', '6', '7', > + '8', '9', '+', '/' > +}; > + > +#define BASE64_SIZE_T_MAX ( (size_t) -1 ) /* SIZE_T_MAX is not standard */ > + > + > +void doSmth(void *x); > + > +#include <string.h> > + > + > +void check(int n) { > + > + if (!(n % 2 && n % 3 && n % 5)) { > + __asm__ ( "add r8, r8, #1;" ); > + } > +} > + > +uint32_t test( > + uint32_t a1, > + uint32_t a2, > + size_t a3, > + size_t a4, > + size_t a5, > + size_t a6) > +{ > + uint32_t nResult = 0; > + uint8_t* h = 0L; > + uint8_t X[128]; > + uint8_t mac[64]; > + size_t len; > + > + doSmth(&a1); > + doSmth(&a2); > + doSmth(&a3); > + doSmth(&a4); > + doSmth(&a5); > + doSmth(&a6); > + > + if (a1 && a2 && a3 && a4 && a5 && a6) { > + nResult = 1; > + h = (void*)X; > + len = sizeof(X); > + memset(X, a2, len); > + len -= 64; > + memcpy(mac ,X, len); > + *(h + len) = a6; > + > + { > + > + > + unsigned char *dst = X; > + size_t dlen = a3; > + size_t *olen = &a6; > + const unsigned char *src = mac; > + size_t slen = a4; > + size_t i, n; > + int C1, C2, C3; > + unsigned char *p; > + > + if( slen == 0 ) > + { > + *olen = 0; > + return( 0 ); > + } > + > + n = slen / 3 + ( slen % 3 != 0 ); > + > + if( n > ( BASE64_SIZE_T_MAX - 1 ) / 4 ) > + { > + *olen = BASE64_SIZE_T_MAX; > + return( 0 ); > + } > + > + n *= 4; > + > + if( ( dlen < n + 1 ) || ( NULL == dst ) ) > + { > + *olen = n + 1; > + return( 0 ); > + } > + > + n = ( slen / 3 ) * 3; > + > + for( i = 0, p = dst; i < n; i += 3 ) > + { > + C1 = *src++; > + C2 = *src++; > + C3 = *src++; > + > + check(i); > + > + *p++ = base64_enc_map[(C1 >> 2) & 0x3F]; > + *p++ = base64_enc_map[(((C1 & 3) << 4) + (C2 >> 4)) & 0x3F]; > + *p++ = base64_enc_map[(((C2 & 15) << 2) + (C3 >> 6)) & 0x3F]; > + *p++ = base64_enc_map[C3 & 0x3F]; > + } > + > + if( i < slen ) > + { > + C1 = *src++; > + C2 = ( ( i + 1 ) < slen ) ? *src++ : 0; > + > + *p++ = base64_enc_map[(C1 >> 2) & 0x3F]; > + *p++ = base64_enc_map[(((C1 & 3) << 4) + (C2 >> 4)) & 0x3F]; > + > + if( ( i + 1 ) < slen ) > + *p++ = base64_enc_map[((C2 & 15) << 2) & 0x3F]; > + else *p++ = '='; > + > + *p++ = '='; > + } > + > + *olen = p - dst; > + *p = 0; > + > +} > + > + __asm__ ("mov r8, %0;" : "=r" ( nResult )); > + } > + else > + { > + nResult = 2; > + } > + > + doSmth(X); > + doSmth(mac); > + > + > + return nResult; > +} > + > +/* The pattern below catches sequences of instructions that were generated > + for ARM and Thumb-2 before the fix for this PR. They are of the form: > + > + ldr rX, <offset from sp or fp> > + <optional non ldr instructions> > + ldr rY, <offset from sp or fp> > + ldr rZ, [rX] > + <optional non ldr instructions> > + cmp rY, rZ > + <optional non cmp instructions> > + bl __stack_chk_fail > + > + Ideally the optional block would check for the various rX, rY and rZ > + registers not being set but this is not possible due to back references > + being illegal in lookahead expression in Tcl, thus preventing to use the > + only construct that allow to negate a regexp from using the backreferences > + to those registers. Instead we go for the heuristic of allowing non > ldr/cmp > + instructions with the assumptions that (i) those are not part of the stack > + protector sequences and (ii) they would only be scheduled here if they > don't > + conflict with registers used by stack protector. > + > + Note on the regexp logic: > + Allowing non X instructions (where X is ldr or cmp) is done by looking for > + some non newline spaces, followed by something which is not X, followed by > + an alphanumeric character followed by anything but a newline and ended by > a > + newline the whole thing an undetermined number of times. The alphanumeric > + character is there to force the match of the negative lookahead for X to > + only happen after all the initial spaces and thus to check the mnemonic. > + This prevents it to match one of the initial space. */ > +/* { dg-final { scan-assembler-not {ldr[ \t]+([^,]+), > \[(?:sp|fp)[^]]*\](?:\n[ \t]+(?!ldr)\w[^\n]*)*\n[ \t]+ldr[ \t]+([^,]+), > \[(?:sp|fp)[^]]*\]\n[ \t]+ldr[ \t]+([^,]+), \[\1\](?:\n[ > \t]+(?!ldr)\w[^\n]*)*\n[ \t]+cmp[ \t]+\2, \3(?:\n[ \t]+(?!cmp)\w[^\n]*)*\n[ > \t]+bl[ \t]+__stack_chk_fail} } } */ > + > +/* Likewise for Thumb-1 sequences of instructions prior to the fix for this > PR > + which had the form: > + > + ldr rS, <offset from sp or fp> > + <optional non ldr instructions> > + ldr rT, <PC relative offset> > + <optional non ldr instructions> > + ldr rX, [rS, rT] > + <optional non ldr instructions> > + ldr rY, <offset from sp or fp> > + ldr rZ, [rX] > + <optional non ldr instructions> > + cmp rY, rZ > + <optional non cmp instructions> > + bl __stack_chk_fail > + > + Note on the regexp logic: > + PC relative offset is checked by looking for a source operand that does not > + contain [ or ]. */ > +/* { dg-final { scan-assembler-not {ldr[ \t]+([^,]+), > \[(?:sp|fp)[^]]*\](?:\n[ \t]+(?!ldr)\w[^\n]*)*\n[ \t]+ldr[ \t]+([^,]+), > [^][\n]*(?:\n[ \t]+(?!ldr)\w[^\n]*)*\n[ \t]+ldr[ \t]+([^,]+), \[\1, > \2\](?:\n[ \t]+(?!ldr)\w[^\n]*)*\n[ \t]+ldr[ \t]+([^,]+), > \[(?:sp|fp)[^]]*\]\n[ \t]+ldr[ \t]+([^,]+), \[\3\](?:\n[ > \t]+(?!ldr)\w[^\n]*)*\n[ \t]+cmp[ \t]+\4, \5(?:\n[ \t]+(?!cmp)\w[^\n]*)*\n[ > \t]+bl[ \t]+__stack_chk_fail} } } */ > >