Tamar Christina <tamar.christ...@arm.com> writes: > Hi All, > > This patch adds support for a compact syntax for specifying constraints in > instruction patterns. Credit for the idea goes to Richard Earnshaw. > > I am sending up this RFC to get feedback for it's inclusion in GCC 14. > With this new syntax we want a clean break from the current limitations to > make > something that is hopefully easier to use and maintain. > > The idea behind this compact syntax is that often times it's quite hard to > correlate the entries in the constrains list, attributes and instruction > lists. > > One has to count and this often is tedious. Additionally when changing a > single > line in the insn multiple lines in a diff change, making it harder to see > what's > going on. > > This new syntax takes into account many of the common things that are done in > MD > files. It's also worth saying that this version is intended to deal with the > common case of a string based alternatives. For C chunks we have some ideas > but those are not intended to be addressed here. > > It's easiest to explain with an example: > > normal syntax: > > (define_insn_and_split "*movsi_aarch64" > [(set (match_operand:SI 0 "nonimmediate_operand" "=r,k,r,r,r,r, r,w, m, m, > r, r, r, w,r,w, w") > (match_operand:SI 1 "aarch64_mov_operand" " > r,r,k,M,n,Usv,m,m,rZ,w,Usw,Usa,Ush,rZ,w,w,Ds"))] > "(register_operand (operands[0], SImode) > || aarch64_reg_or_zero (operands[1], SImode))" > "@ > mov\\t%w0, %w1 > mov\\t%w0, %w1 > mov\\t%w0, %w1 > mov\\t%w0, %1 > # > * return aarch64_output_sve_cnt_immediate (\"cnt\", \"%x0\", operands[1]); > ldr\\t%w0, %1 > ldr\\t%s0, %1 > str\\t%w1, %0 > str\\t%s1, %0 > adrp\\t%x0, %A1\;ldr\\t%w0, [%x0, %L1] > adr\\t%x0, %c1 > adrp\\t%x0, %A1 > fmov\\t%s0, %w1 > fmov\\t%w0, %s1 > fmov\\t%s0, %s1 > * return aarch64_output_scalar_simd_mov_immediate (operands[1], SImode);" > "CONST_INT_P (operands[1]) && !aarch64_move_imm (INTVAL (operands[1]), > SImode) > && REG_P (operands[0]) && GP_REGNUM_P (REGNO (operands[0]))" > [(const_int 0)] > "{ > aarch64_expand_mov_immediate (operands[0], operands[1]); > DONE; > }" > ;; The "mov_imm" type for CNT is just a placeholder. > [(set_attr "type" "mov_reg,mov_reg,mov_reg,mov_imm,mov_imm,mov_imm,load_4, > > load_4,store_4,store_4,load_4,adr,adr,f_mcr,f_mrc,fmov,neon_move") > (set_attr "arch" "*,*,*,*,*,sve,*,fp,*,fp,*,*,*,fp,fp,fp,simd") > (set_attr "length" "4,4,4,4,*, 4,4, 4,4, 4,8,4,4, 4, 4, 4, 4") > ] > ) > > New syntax: > > (define_insn_and_split "*movsi_aarch64" > [(set (match_operand:SI 0 "nonimmediate_operand") > (match_operand:SI 1 "aarch64_mov_operand"))] > "(register_operand (operands[0], SImode) > || aarch64_reg_or_zero (operands[1], SImode))" > "@@ (cons: 0 1; attrs: type arch length) > [=r, r ; mov_reg , * , 4] mov\t%w0, %w1 > [k , r ; mov_reg , * , 4] ^ > [r , k ; mov_reg , * , 4] ^ > [r , M ; mov_imm , * , 4] mov\t%w0, %1 > [r , n ; mov_imm , * , *] # > [r , Usv; mov_imm , sve , 4] << aarch64_output_sve_cnt_immediate ('cnt', > '%x0', operands[1]); > [r , m ; load_4 , * , 4] ldr\t%w0, %1 > [w , m ; load_4 , fp , 4] ldr\t%s0, %1 > [m , rZ ; store_4 , * , 4] str\t%w1, %0 > [m , w ; store_4 , fp , 4] str\t%s1, %0 > [r , Usw; load_4 , * , 8] adrp\t%x0, %A1;ldr\t%w0, [%x0, %L1] > [r , Usa; adr , * , 4] adr\t%x0, %c1 > [r , Ush; adr , * , 4] adrp\t%x0, %A1 > [w , rZ ; f_mcr , fp , 4] fmov\t%s0, %w1 > [r , w ; f_mrc , fp , 4] fmov\t%w0, %s1 > [w , w ; fmov , fp , 4] fmov\t%s0, %s1 > [w , Ds ; neon_move, simd, 4] << aarch64_output_scalar_simd_mov_immediate > (operands[1], SImode);" > "CONST_INT_P (operands[1]) && !aarch64_move_imm (INTVAL (operands[1]), > SImode) > && REG_P (operands[0]) && GP_REGNUM_P (REGNO (operands[0]))" > [(const_int 0)] > { > aarch64_expand_mov_immediate (operands[0], operands[1]); > DONE; > } > ;; The "mov_imm" type for CNT is just a placeholder. > ) > > The patch contains some more rewritten examples for both Arm and AArch64. I > have included them for examples in this RFC but the final version posted in > GCC 14 will have these split out. > > The main syntax rules are as follows (See docs for full rules): > - Template must start with "@@" to use the new syntax. > - "@@" is followed by a layout in parentheses which is "cons:" followed by > a list of match_operand/match_scratch IDs, then a semicolon, then the > same for attributes ("attrs:"). Both sections are optional (so you can > use only cons, or only attrs, or both), and cons must come before attrs > if present. > - Each alternative begins with any amount of whitespace. > - Following the whitespace is a comma-separated list of constraints and/or > attributes within brackets [], with sections separated by a semicolon. > - Following the closing ']' is any amount of whitespace, and then the actual > asm output. > - Spaces are allowed in the list (they will simply be removed). > - All alternatives should be specified: a blank list should be > "[,,]", "[,,;,]" etc., not "[]" or "" (however genattr may segfault if > you leave certain attributes empty, I have found). > - The actual constraint string in the match_operand or match_scratch, and > the attribute string in the set_attr, must be blank or an empty string > (you can't combine the old and new syntaxes). > - The common idion * return can be shortened by using <<. > - Any unexpanded iterators left during processing will result in an error at > compile time. If for some reason <> is needed in the output then these > must be escaped using \. > - Inside a @@ block '' is treated as "" when there are multiple characters > inside the single quotes. This version does not handle multi byte > literals > like specifying characters as their numerical encoding, like \003 nor does > it handle unicode, especially multibyte encodings. This feature may be > more > trouble than it's worth so have no finished it off, however this means one > can use 'foo' instead of \"foo\" to denote a multicharacter string. > - Inside an @@ block any unexpanded iterators will result in a compile time > fault instead of incorrect assembly being generated at runtime. If the > literal <> is needed in the output this needs to be escaped with \<\>. > - This check is not performed inside C blocks (lines starting with *). > - Instead of copying the previous instruction again in the next pattern, one > can use ^ to refer to the previous asm string.
Thanks for doing this. The new syntax seems like a clear improvement for complex patterns like movs. Some comments/suggestions: - From a style perspective, out-of-order constraints should IMO be strongly discouraged. The asm string uses %0, %1, %2 etc. to refer to operands, and having that directly after a list that puts the constraints in a different order (such as [%2, %0, %1]) would IMO be very confusing. I agree there might be cases where dropping constraints makes sense. But I think in general we should encourage all constraints to be specified, and be specified in order. And that's likely to be the natural choice in an overwhelming majority of cases anyway. So how about having a simpler syntax for the first line when all constraints are specified in order? Maybe just "cons" (without the colon or numbers). - I'm not too keen on the '' thing. It sounded from internal discussion like backslashes and quoting were a problem generally. Would it work to quote the new form in {@ ... } instead? There should be no compatibility problem with that, since @ isn't a standard C++ lexing token. - Could we support a comment syntax? E.g. ignore lines beginning with ;; or // (or both)? In the example above, it would be good to keep the comment about the CNT type attribute nearer to the attribute itself. - Very minor, but using [...] rather than (...) for the first line might make it more visually obvious that it's acting as a table header for the [...] rows. Haven't done a detailed review of the gensupport bits, but: > [...] > @@ -700,12 +702,37 @@ process_template (class data *d, const char > *template_code) > if (sp != ep) > message_at (d->loc, "trailing whitespace in output template"); > > - while (cp < sp) > + /* Check for any unexpanded iterators. */ > + std::string buff (cp, sp - cp); > + if (bp[0] != '*' && d->compact_syntax_p) > { > - putchar (*cp); > - cp++; > + size_t start = buff.find ('<'); > + size_t end = buff.find ('>', start + 1); > + if (end != std::string::npos || start != std::string::npos) > + { > + if (end == std::string::npos || start == std::string::npos) > + fatal_at (d->loc, "unmatched angle brackets, likely an " > + "error in iterator syntax in %s", buff.c_str ()); > + > + if (start != 0 > + && buff[start-1] == '\\' > + && buff[end-1] == '\\') > + { > + /* Found a valid escape sequence, erase the characters for > + output. */ > + buff.erase (end-1, 1); > + buff.erase (start-1, 1); > + } > + else > + fatal_at (d->loc, "unresolved iterator '%s' in '%s'", > + buff.substr(start+1, end - start-1).c_str (), > + buff.c_str ()); > + } > } Asm strings that want unbalanced but quoted < or > should be able to use them, so the check for backslashes should probably come first. I suppose this also runs into the classic problem of whether the preceding backslash was itself quoted, etc. So maybe it would make sense to walk through character-by-character, something like: const char *p = cp; const char *last_bracket = nullptr; while (p < sp) { if (*p == '\\' && p + 1 < sp) { p += 2; continue; } if (*p == '>' && last_bracket && *last_bracket == '<') ... unexpanded iterator ... else if (*p == '<' || *p == '>') last_bracket = p; p += 1; } if (last_bracket) ... error ... That also copes with unlikely things like \<...\>...<foo>, where an unexpanded iterator (or incorrectly quoted <...>) comes after a correctly-quoted <...>. Thanks, Richard