Tamar Christina <[email protected]> writes:
> Hi All,
>
> The following testcase
>
> #pragma GCC target ("+sve")
> extern char __attribute__ ((simd, const)) fn3 (int, short);
> void test_fn3 (float *a, float *b, double *c, int n)
> {
> for (int i = 0; i < n; ++i)
> a[i] = fn3 (b[i], c[i]);
> }
>
> at -Ofast ICEs because my previous patch only added support for combining 2
> partial SVE vectors into a bigger vector. However There can also 4 and 8
> piece subvectors.
>
> This patch fixes this by implementing the missing expansions.
>
> Bootstrapped Regtested on aarch64-none-linux-gnu and no issues.
>
> Ok for master?
>
> Thanks,
> Tamar
>
> gcc/ChangeLog:
>
> PR target/96342
> PR middle-end/118272
> * config/aarch64/aarch64-sve.md (vec_init<mode><Vquad>,
> vec_initvnx16qivnx2qi): New.
> * config/aarch64/aarch64.cc (aarch64_sve_expand_vector_init_subvector):
> Rewrite to support any arbitrary combinations.
> * config/aarch64/iterators.md (SVE_NO2E): Update to use SVE_NO4E
> (SVE_NO2E, Vquad): New.
>
> gcc/testsuite/ChangeLog:
>
> PR target/96342
> PR middle-end/118272
> * gcc.target/aarch64/vect-simd-clone-3.c: New test.
>
> ---
>
> diff --git a/gcc/config/aarch64/aarch64-sve.md
> b/gcc/config/aarch64/aarch64-sve.md
> index
> 6659bb4fcab34699f22ff883825de1cd67108203..35f55bfacfc3238a8a7aa69015f36ba32981af59
> 100644
> --- a/gcc/config/aarch64/aarch64-sve.md
> +++ b/gcc/config/aarch64/aarch64-sve.md
> @@ -2839,6 +2839,7 @@ (define_expand "vec_init<mode><Vel>"
> }
> )
>
> +;; Vector constructor combining two half vectors { a, b }
> (define_expand "vec_init<mode><Vhalf>"
> [(match_operand:SVE_NO2E 0 "register_operand")
> (match_operand 1 "")]
> @@ -2849,6 +2850,28 @@ (define_expand "vec_init<mode><Vhalf>"
> }
> )
>
> +;; Vector constructor combining four quad vectors { a, b, c, d }
> +(define_expand "vec_init<mode><Vquad>"
> + [(match_operand:SVE_NO4E 0 "register_operand")
> + (match_operand 1 "")]
> + "TARGET_SVE"
> + {
> + aarch64_sve_expand_vector_init_subvector (operands[0], operands[1]);
> + DONE;
> + }
> +)
> +
> +;; Vector constructor combining eight vectors { a, b, c, d, ... }
> +(define_expand "vec_initvnx16qivnx2qi"
> + [(match_operand:VNx16QI 0 "register_operand")
> + (match_operand 1 "")]
> + "TARGET_SVE"
> + {
> + aarch64_sve_expand_vector_init_subvector (operands[0], operands[1]);
> + DONE;
> + }
> +)
> +
> ;; Shift an SVE vector left and insert a scalar into element 0.
> (define_insn "vec_shl_insert_<mode>"
> [(set (match_operand:SVE_FULL 0 "register_operand")
> diff --git a/gcc/config/aarch64/aarch64.cc b/gcc/config/aarch64/aarch64.cc
> index
> cb9b155826d12b622ae0df1736e4b042d01cf56a..e062cc00d1a548290377382c98ea8f3bb9310513
> 100644
> --- a/gcc/config/aarch64/aarch64.cc
> +++ b/gcc/config/aarch64/aarch64.cc
> @@ -24898,18 +24898,51 @@ aarch64_sve_expand_vector_init_subvector (rtx
> target, rtx vals)
> machine_mode mode = GET_MODE (target);
> int nelts = XVECLEN (vals, 0);
>
> - gcc_assert (nelts == 2);
> + gcc_assert (nelts % 2 == 0);
>
> - rtx arg0 = XVECEXP (vals, 0, 0);
> - rtx arg1 = XVECEXP (vals, 0, 1);
> -
> - /* If we have two elements and are concatting vector. */
> - machine_mode elem_mode = GET_MODE (arg0);
> + /* We have to be concatting vector. */
> + machine_mode elem_mode = GET_MODE (XVECEXP (vals, 0, 0));
> gcc_assert (VECTOR_MODE_P (elem_mode));
>
> - arg0 = force_reg (elem_mode, arg0);
> - arg1 = force_reg (elem_mode, arg1);
> - emit_insn (gen_aarch64_pack_partial (mode, target, arg0, arg1));
> + auto_vec<rtx> worklist;
> + machine_mode wider_mode
> + = related_vector_mode (elem_mode, GET_MODE_INNER (elem_mode),
> + GET_MODE_NUNITS (elem_mode) * 2).require ();
> +
> + /* First create the wider first level pack, which also allows us to force
> + the values to registers and put the elements in a more convenient
> + data structure. */
> +
> + for (int i = 0; i < nelts; i+=2)
> + {
> + rtx arg0 = XVECEXP (vals, 0, i);
> + rtx arg1 = XVECEXP (vals, 0, i + 1);
> + arg0 = force_reg (elem_mode, arg0);
> + arg1 = force_reg (elem_mode, arg1);
> + rtx tmp = gen_reg_rtx (wider_mode);
> + emit_insn (gen_aarch64_pack_partial (wider_mode, tmp, arg0, arg1));
> + worklist.safe_push (tmp);
> + }
> +
> + /* Keep widening pairwise to have maximum throughput. */
> + while (worklist.length () > 1)
> + {
> + rtx arg0 = worklist.pop ();
> + rtx arg1 = worklist.pop ();
> + gcc_assert (GET_MODE (arg0) == GET_MODE (arg1));
> +
> + wider_mode
> + = related_vector_mode (wider_mode, GET_MODE_INNER (wider_mode),
> + GET_MODE_NUNITS (wider_mode) * 2).require ();
> +
> + rtx tmp = gen_reg_rtx (wider_mode);
> + emit_insn (gen_aarch64_pack_partial (wider_mode, tmp, arg0, arg1));
> + worklist.safe_push (tmp);
It looks like this might not work VNx16QI->VNx2QI, since we'd start with
4 VNx8QIs on the worklist, and after the first iteration would have:
VNx8QI
VNx8QI
VNx4QI
We'd then try to pack the second VNx8QI and the VNx4QI together.
How about instead doing something like:
worklist.reserve (nelts);
for (int i = 0; i < nelts; ++i)
worklist.quick_push (force_reg (elem_mode, XVECEXP (vals, 0, i)));
while (nelts > 2)
{
for (int i = 0; i < nelts; i += 2)
{
...read worklist[i] and worklist[i + 1]...
...write back to worklist[i / 2]...
}
nelts /= 2;
}
emit_insn (gen_aarch64_pack_partial (mode, target, worklist[0],
worklist[1]));
Thanks,
Richard
> + }
> +
> + gcc_assert (wider_mode == mode);
> + emit_move_insn (target, worklist.pop ());
> +
> return;
> }
>
> diff --git a/gcc/config/aarch64/iterators.md b/gcc/config/aarch64/iterators.md
> index
> 07b97547cb292e6d4dc1040173a5d5525fb268d5..60bad5c72bc667be19f8224af87ec5451b4b1a9a
> 100644
> --- a/gcc/config/aarch64/iterators.md
> +++ b/gcc/config/aarch64/iterators.md
> @@ -140,9 +140,12 @@ (define_mode_iterator VQ_I [V16QI V8HI V4SI V2DI])
> ;; VQ without 2 element modes.
> (define_mode_iterator VQ_NO2E [V16QI V8HI V4SI V8HF V4SF V8BF])
>
> +;; SVE modes without 2 and 4 element modes.
> +(define_mode_iterator SVE_NO4E [VNx16QI VNx8QI VNx8HI VNx8HF VNx8BF])
> +
> ;; SVE modes without 2 element modes.
> -(define_mode_iterator SVE_NO2E [VNx16QI VNx8QI VNx4QI VNx8HI VNx4HI VNx8HF
> - VNx4HF VNx8BF VNx4BF VNx4SI VNx4SF])
> +(define_mode_iterator SVE_NO2E [SVE_NO4E VNx4QI VNx4HI VNx4HF VNx4BF VNx4SI
> + VNx4SF])
>
> ;; 2 element quad vector modes.
> (define_mode_iterator VQ_2E [V2DI V2DF])
> @@ -1764,6 +1767,11 @@ (define_mode_attr Vhalf [(V8QI "v4qi") (V16QI "v8qi")
> (VNx8BF "vnx4bf") (VNx4BF "vnx2bf")
> (VNx4SI "vnx2si") (VNx4SF "vnx2sf")])
>
> +;; Quad modes of all vector modes, in lower-case.
> +(define_mode_attr Vquad [(VNx16QI "vnx4qi") (VNx8QI "vnx2qi")
> + (VNx8HI "vnx2hi") (VNx8HF "vnx2hf")
> + (VNx8BF "vnx2bf")])
> +
> ;; Single-element half modes of quad vector modes.
> (define_mode_attr V1HALF [(V2DI "V1DI") (V2DF "V1DF")])
>
> diff --git a/gcc/testsuite/gcc.target/aarch64/vect-simd-clone-3.c
> b/gcc/testsuite/gcc.target/aarch64/vect-simd-clone-3.c
> new file mode 100644
> index
> 0000000000000000000000000000000000000000..fb50da1f714ce929da0e35b7d9fead2d93476cb9
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/aarch64/vect-simd-clone-3.c
> @@ -0,0 +1,27 @@
> +/* { dg-do compile } */
> +/* { dg-options "-std=c99" } */
> +/* { dg-additional-options "-O3 -march=armv8-a" } */
> +
> +#pragma GCC target ("+sve")
> +extern char __attribute__ ((simd, const)) fn3 (int, short);
> +void test_fn3 (float *a, float *b, double *c, int n)
> +{
> + for (int i = 0; i < n; ++i)
> + a[i] = fn3 (b[i], c[i]);
> +}
> +
> +/* { dg-final { scan-assembler {\s+_ZGVsMxvv_fn3\n} } } */
> +
> +extern char __attribute__ ((simd, const)) fn4 (int, char);
> +void test_fn4 (float *a, float *b, double *c, int n)
> +{
> + for (int i = 0; i < n; ++i)
> + a[i] = fn4 (b[i], c[i]);
> +}
> +
> +/* { dg-final { scan-assembler {\s+_ZGVsMxvv_fn4\n} } } */
> +
> +/* { dg-final { scan-assembler-times {\s+uzp1\tz[0-9]+\.b, z[0-9]+\.b,
> z[0-9]+\.b\n} 6 } } */
> +/* { dg-final { scan-assembler-times {\s+uzp1\tz[0-9]+\.h, z[0-9]+\.h,
> z[0-9]+\.h\n} 16 } } */
> +/* { dg-final { scan-assembler-times {\s+uzp1\tz[0-9]+\.s, z[0-9]+\.s,
> z[0-9]+\.s\n} 24 } } */
> +
