Peter Clifton wrote:
On Fri, 2006-09-08 at 09:18 -0400, John Luciani wrote:
On 9/8/06, Peter Clifton <[EMAIL PROTECTED]> wrote:
Hi,
This attached schematic file is giving me really strange results:
I'm using:
gsch2pcb -o untitled-1 test-1.sch
Consistently... the component "R2" gets output in PCB with name "5511".
Does R3 also get named "5511" or is it just R2?
I do not have the footprints for "ACY300" so I changed the R2 and R3 footprints
for "0805" and R2 and R3 were named "unknown". If ACY300 is generated using
m4 you may want to check the macro code.
Executing the attached trouble.m4 reproduces the problem with this
command:
m4 -I /usr/local/share/pcb/m4 /usr/local/share/pcb/m4/common.m4
trouble.m4
BUT: If I remove the first line, the "PKG_0805(`0805',`R4',`unknown')",
it goes away... how odd!
Just one of the reasons I want to move the invocation of m4 to build
time. As you've surely noticed by now, R4 is probably used in the
internal macro for something and gets expanded. There are certainly
some quoting issues in the library that show up when called on more than
1 footprint at a time.
-Dan
_______________________________________________
geda-dev mailing list
[email protected]
http://www.seul.org/cgi-bin/mailman/listinfo/geda-dev
