Even as I wrote the question, I came up with one answer, but I'll ask the question nonetheless.
I have a schematic with a bunch o' nets that go from one sheet to another. I simply copied them from various places on sheet 1 and pasted them on sheet 2. Now I see that they are not all the same length. I want to attach them to a connector on sheet 2 and have the text for the netnames all align. Then I want their right hand sides to all align. Half of them don't. So far, I just go down the page, clicking on each net and dragging it out to my common stop position. Is there some way to adjust the length (i.e. end points) of multiple nets at once? The answer I came up with as I wrote this was to attach off-page connectors to each of the nets, then I should be able to grab multiples of those and move them left or right as I desire. It could be argued that having off-page connectors is a good idea in the first place. But I am still curious to learn if there is some other mechanism to do this. --wpd _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user