Hi Patrick, On Friday 11 August 2006 04:19, Patrick Doyle wrote: > The other night when I created a bus and attached my nets to it, the > bus rippers were all attached as \. (That is, angled from top to > bottom and left to right). Tonight, for some reason, they seem to be > attaching as /. Did I change something between two nights ago and > tonight?
O.k. I've tracked the behaviour. If you attach the first net to the bus, there's a variable set to the bus object called "ripperdir". If you have a vertical bus and you connect your first net to the upper half, the busripper is drawn below the net. If you draw the first net into the lower half, the busripper is drown above the net. If you have a horizontal bus, the same applies to left and right. See documentation --> file format --> bus, for the variable. And o_net_add_busripper() in file gschem/src/o_net.c for the decision of the ripper direction. regards Werner _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user