there is goes.. thank you
2006/11/7, John Luciani <[EMAIL PROTECTED]>:
On 11/7/06, Giorgenes Gelatti <[EMAIL PROTECTED]> wrote: > sure. > And I did the "disperse all elements" too. > > 2006/11/7, Dan McMahill <[EMAIL PROTECTED]>: > > Giorgenes Gelatti wrote: > > > > > > 2006/11/6, John Luciani <[EMAIL PROTECTED]>: > > > > > >> On 11/6/06, Giorgenes Gelatti <[EMAIL PROTECTED]> wrote: > > >> > I got a simpler circuit that is not working. > > >> > I have snap turned on, but can't see a way of making it works :( > > >> > > > >> > > >> What specifically isn't working? > > >> > > >> the netlist produced --- > > >> > > >> unnamed_net9 serial-2 pinbar-9 > > >> unnamed_net8 serial-1 pinbar-10 > > >> unnamed_net7 serial-4 pinbar-7 > > >> unnamed_net6 serial-6 pinbar-5 > > >> unnamed_net5 serial-8 pinbar-3 > > >> unnamed_net4 serial-3 pinbar-8 > > >> unnamed_net3 serial-5 pinbar-6 > > >> unnamed_net2 serial-7 pinbar-4 > > >> unnamed_net1 serial-9 pinbar-2 > > >> > > >> which is all of the connections. I do not have the same set of > > >> footprints so I > > >> did not check out a PCB file. > > >> > > >> (* jcl *) > > > > > In pcb the components are not connected. :-( Attach the PCB file and the netlist file. (* jcl *) -- http://www.luciani.org _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
db2bar.net
Description: Binary data
db2bar.pcb
Description: Binary data
_______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
