On Wed, 15 Nov 2006 19:03:57 -0600 John Griessen <[EMAIL PROTECTED]> wrote:
> > > David Carr wrote: > > Quick question: > > > > I have a board with 344 vias that I'd like to increase in size from > > 20 mils to 24 mils. > > Select them and any other non-via objects, but not the other size vias > somehow. Maybe multiple area selects or one big one or select > all...depending... > > In the pcb command window give the command ChangeDrillSize > (SelectedVias, 24, mil) and if you want to make the annulus bigger > too... ChangeSize(SelectedVias,44,mil) > > > The pcb commands will take only vias from the selected set and change > them. That said, it _would_ be very helpful to have something else available except the +/- 10 mils fixed step (not only for holes, also for track widths etc). I would gladly sacrifice the +/- 10 options for a simple dialog which asks for a new size. It doesn't make much sense to decrease a 12 mil track by 10 mils anyway. I'm not too experienced a programmer, but I'm willing to help out... John _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user