I have made the following additions and changes to the footprint library at luciani.org ---
Additions * Added all Hirose DF9 Series 1mm pitch SMT Board to Board Connectors except the bottom entry header (DF9L-31P-1V). * Added Molex 71308 Dual Row, SMT, Vertical Header, 100 mil pitch with retention pegs. * Added Keystone AAA Battery Clips, part number 82. The footprint contains two clips spaced 1080 mils apart. * Added Keystone AA Battery Clips, part number 92. The footprint contains two clips spaced 1300 mils apart. * Added 3M 2mm x 2mm Pin Strip Headers 1512xx-8x2x-xx (straight) * Added 3M 2mm x 2mm Pin Strip Headers 1512xx-7x2x-xx (right angle) * Added 3M 2mm x 2mm Pin Strip Headers 1502xx-600x-xx (straight) * Added TO263_170P_788L1_5N__National_TS5B_Package * Added SC70-65P-210L1-6N__On-Semi_419B-02-Package and SC70-65P-210L1-5N__On-Semi_419A-02-Package. The On-Semi pad length specification is 0.5mm compared to 1mm for the LTC SC70. * Added Powerstor FC Supercap CAPMP-1000P-1750W-4000L__Powerstor_FC-Series Changes * CON_USB_TYPEB__Keystone_924 --- changed the mounting holes to pins in footprint. * CON__CUI_PJ-002AH-SMT --- decreased the size of the alignment pin holes. The small pin is now 67mils, the large pin is now to 79mils. * Corrected pads on the JST BxB-PH-K headers. The solder-side pads are changed from pins to pins with rounded pads which now matches the component-side pins. The refdes is shifted 10mils from the body outline (it was apx 1-2mils). (* jcl *) -- http://www.luciani.org _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user