On tor, 2006-12-21 at 09:40 -0600, John Griessen wrote: > > There is a setting for mouse snap to line ends snap distance, I think, but > could > not find it in the manual just now. I make sure my lines are on grid with a > larger grid setting than 1 mil. 5 mils is enough, and more can be good also. > The place on a line end to grab -- the line dragging handle -- is the center > of > the circle or semicircle that forms the line end. When you got the entire > line > to move, you might have had it selected, or your mouse landed on the line, > not > on the line-end-circle's center. > > The PCB menu Settings-->ThinDraw or toggling default keybinding <key>i > changes > all traces between a centerline only appearance where the line end is the > grab > handle, and normal view showing the extent of copper for a trace. > > With a 5 mil grid, I can select and move lines well while looking at about > 2500 > mils across my screen, a fairly "high" view, which always helps productivity. > > John G
thanks, will try your tips with my next design /jonatan _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user