Thank you again. I am starting to catch on to this program... I still have a lot to learn.
-Joel > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:geda-user- > [EMAIL PROTECTED] On Behalf Of John Luciani > Sent: Wednesday, December 27, 2006 6:53 PM > To: gEDA user mailing list > Subject: Re: gEDA-user: PCB footprint - 2 sided part > > On 12/27/06, Ostheller, Joel A. <[EMAIL PROTECTED]> wrote: > > > > > > Can I get some tips on how I would create a footprint for this SMA right > > angle connector that lives on both sides of the board? Should I create > it > > with through holes? Should I create two footprints and just make sure to > > line them up? Perhaps I should have picked an easier part to do my first > > footprint? Very not obvious. > > > > > http://emersonnetworkpower.com/webapp/wcs/stores/servlet/ESC/resources/142 > 07 > > 11821.pdf > > > > Below are footprints for the 142-0711-821 and 142-0701-801. > > NB: Carefully check these footprints against the specification. > > (* jcl *) > -- > http://www.luciani.org > > > # 142-0701-801 > > Element[0x0 "SMA" "" "" 0 0 23500 -5000 0 100 0x0] > ( > Pad[0 -5500 0 5500 9000 2000 11000 "" "1" 0x0100] > Pad[0 -5500 0 5500 9000 2000 11000 "" "1" 0x0180] > Pad[-17000 -5250 -17000 5250 9500 2000 11500 "" "2" 0x0100] > Pad[-17000 -5250 -17000 5250 9500 2000 11500 "" "2" 0x0180] > Pad[-17000 10750 -17000 12550 1800 2000 3800 "" "2" 0x0100] > Pin[-17000 13650 3800 2000 5800 1800 "" "2" 0x01] > Pad[-17000 10750 -17000 12550 1800 2000 3800 "" "2" 0x0180] > Pin[-17000 13650 3800 2000 5800 1800 "" "2" 0x01] > Pad[17000 -5250 17000 5250 9500 2000 11500 "" "2" 0x0100] > Pad[17000 -5250 17000 5250 9500 2000 11500 "" "2" 0x0180] > Pad[17000 10750 17000 12550 1800 2000 3800 "" "2" 0x0100] > Pin[17000 13650 3800 2000 5800 1800 "" "2" 0x01] > Pad[17000 10750 17000 12550 1800 2000 3800 "" "2" 0x0180] > Pin[17000 13650 3800 2000 5800 1800 "" "2" 0x01] > ElementLine[-16000 -13750 16000 -13750 5500] > ElementLine[-13000 -13750 -13000 -26000 1000] > ElementLine[-13000 -26000 -16000 -26000 1000] > ElementLine[-16000 -26000 -16000 -47000 1000] > ElementLine[-16000 -47000 16000 -47000 1000] > ElementLine[16000 -47000 16000 -26000 1000] > ElementLine[16000 -26000 13000 -26000 1000] > ElementLine[13000 -26000 13000 -13750 1000] > ) > > > > # 142-0711-821 > Element[0x0 "SMA" "" "" 0 0 20500 -5000 0 100 0x0] > ( > Pad[0 -4750 0 4750 7000 2000 9000 "" "1" 0x0100] > Pad[0 -4750 0 4750 7000 2000 9000 "" "1" 0x0180] > Pad[-12000 -3000 -12000 3000 10500 2000 12500 "" "2" 0x0100] > Pad[-12000 -3000 -12000 3000 10500 2000 12500 "" "2" 0x0180] > Pad[-12000 9000 -12000 10800 1800 2000 3800 "" "2" 0x0100] > Pin[-12000 11900 3800 2000 5800 1800 "" "2" 0x01] > Pad[-12000 9000 -12000 10800 1800 2000 3800 "" "2" 0x0180] > Pin[-12000 11900 3800 2000 5800 1800 "" "2" 0x01] > Pad[12000 -3000 12000 3000 10500 2000 12500 "" "2" 0x0100] > Pad[12000 -3000 12000 3000 10500 2000 12500 "" "2" 0x0180] > Pad[12000 9000 12000 10800 1800 2000 3800 "" "2" 0x0100] > Pin[12000 11900 3800 2000 5800 1800 "" "2" 0x01] > Pad[12000 9000 12000 10800 1800 2000 3800 "" "2" 0x0180] > Pin[12000 11900 3800 2000 5800 1800 "" "2" 0x01] > ElementLine[-9750 -12000 9750 -12000 5500] > ElementLine[-6750 -12000 -6750 -24250 1000] > ElementLine[-6750 -24250 -9750 -24250 1000] > ElementLine[-9750 -24250 -9750 -45250 1000] > ElementLine[-9750 -45250 9750 -45250 1000] > ElementLine[9750 -45250 9750 -24250 1000] > ElementLine[9750 -24250 6750 -24250 1000] > ElementLine[6750 -24250 6750 -12000 1000] > ) > > > _______________________________________________ > geda-user mailing list > geda-user@moria.seul.org > http://www.seul.org/cgi-bin/mailman/listinfo/geda-user _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user