Dan, Sorry, I inadvertently sent you a copy of project1 using only 2 of the symbol slots, Test_2.sch and Test_3.sch. I can run that version correctly as well.
I expect you will see a failure if you add Test_1.sch to the project1 file. I'm attaching an altered copy of project1 below. Harold Skank On Sat, 2007-02-24 at 12:33 -0500, Dan McMahill wrote: > Harold D. Skank wrote: > > Dan & Co. > > > > I have attached all the files revelant to this problem below, i.e. the > > pcb footprint, the *.sym files from gEDA, the schematic and project > > files and a copy of the error output from the gsch2pcb command. > > > > I VERY much appreciate any assistance on this problem. While I don't > > see the notation in these files, in other files I have seen references > > to format #f "~:@{~A-~A ~} that you cite below. > > > > Here's hoping this will help you find the problem. > > > > Harold Skank > > > hmmm. > > I'm not able to reproduce this. > > When you run gsch2pcb, try adding "-v". You'll see that > > > gnetlist -g PCB -o TestOut.net Test_2.sch Test_3.sch > > is called. > > When I run that command by hand or as part of gsch2pcb, it succeeds and > I see the GND net in TestOut.net. I also tried > > gnetlist -g PCB -o TestOut.net Test_1.sch Test_2.sch Test_3.sch Test_4.sch > > and it also worked. > > What version of guile are you using? > > % guile --version > Guile 1.6.6 > > > How about gnetlist? > > % gnetlist > gEDA/gnetlist version 20070216 > > > All I did was save all your attachments to an empty directory and add a > gafrc file with > > (component-library ".") > > in it. > > > Anyone else able to reproduce the problem? > > -Dan > > > _______________________________________________ > geda-user mailing list > geda-user@moria.seul.org > http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
# List all the schematics to be netlisted # and laid out on the pcboard. schematics Test_1.sch Test_2.sch Test_3.sch # Give a location for the footprints file elements-dir /usr/tools/geda-install/share/pcb/newlib # For an output-name of foo, gsch2pcb generates files # foo.net, foo.pcb, and foo.new.pcb. If there is no # output-name specified, the file names are derived from # the first listed schematic, i.e. first.net, etc. output-name TestOut
_______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user