One practical solution for very small parts is to hid the refdes on the board but make a large assembly drawing that has them.
Steve Meier DJ Delorie wrote: >> S2/S2/L1 S2/S2/C1 and S2/S2/U1 >> >> is the RenumberBlock funtion capable of this? >> > > It currently pulls the last string of digits (suffix) off for > renumbering, but pulling the first string shouldn't be too hard. It > doesn't give you automatic updating, though. If you edit the master > block, you'd cut out the copies, and re-copy/renumber the master block > to make new copies. > > We could script this if we had an action to select a region, but it > would certainly be better if it "just knew" about such blocks. > > >> Because when you use those virtual 01005 capcitors there isn't a lot >> of room for a readable refdes as it is >> > > Too true. I didn't even bother with a silkscreen on the furnace > board, and that's only 0603s. > > > _______________________________________________ > geda-user mailing list > geda-user@moria.seul.org > http://www.seul.org/cgi-bin/mailman/listinfo/geda-user > > _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user