Thanks super, DJ & John. I've used Sunstone a couple of times, and they seem to figure out what they need--when queried they say that the gerber files are labeled well enough for them to figure out what's what. But due to my compulsive nature, I was uncomfortable with checking off the "don't know" boxes for those 3 requested files. I'm now relatively sure that I can check off the "don't need" boxes. Again, many thanks, Craig
On 4/12/07, DJ Delorie <[EMAIL PROTECTED]> wrote:
Just to clarify what the others said: > Tool Size Report This *might* be what we call the "fab drawing", which has a list of how many of each drill you need. I usually use the fab drawing as the "mechanical" drawing, but there is a separate outline drawing for the automated submittal systems that are becoming popular these days. > Aperture for 274D Format Drill files come in two formats: RS-274D requires an external file that says what size drill each tool index contains. RS-274X includes the drill sizes, so no external file is needed. PCB always uses RS-274X, so PCB will never generate (nor need) a separate drill size file. _______________________________________________ geda-user mailing list [EMAIL PROTECTED] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
_______________________________________________ geda-user mailing list [EMAIL PROTECTED] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user