I am trying to load a vendor drillmap file. I cut and pasted the file from the pcb.html pages. When I load the file, the following appears in the pcb.log window.
No drillmap resource found. Loaded 0 vendroo drills from <path to resource file> The skips and DRC appear to be working though. Has there been a change in the drill map format lately ? Below is the first part of my file. Thanks. # Optional name of the vendor vendor = "APC" # units for dimensions in this file. # Allowed values: mil/inch/mm units = mil # drill table drillmap = { # When mapping drill sizes, select the nearest size # or always round up. Allowed values: up/nearest round = up # The list of vendor drill sizes. Units are as specified # above. 17 25 32 35 39 49 57 83 122 149 # optional section for skipping mapping of certain elements # based on reference designator, value, or description # this is useful for critical parts where you may not # want to change the drill size. Note that the strings # are regular expressions. skips = { ... _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user