Philipp Klaus Krause schrieb: > I have a problem in a recently created schematic: > gschem2pcb creates a netlist where +5V and GND are connected together. > I do not see such a connection in the schematic (5V stuff is in the > lower left corner only, VCC is +3.3V) > > gschem2pcb worked initially, then I realized that pins on the voltage > regulator were wrong in the symbol. I changed the pin numbers in the > symbol, now there's the problem. I already tried deleting and > reinserting the voltage regulatgor symbol, but it didn't help. > > Philipp
I've solved the problem: There was a net=GND:2 in the symbol. Philipp _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user