On Sun, 2007-08-26 at 09:12 -0700, Elliott Hoole wrote: > I'm new to gEDA, so I've read everything I could find (and Google IS my > friend), and it seems that if I want a B-size sheet in gschem to use for > my schematics then I should have a gschemrc file in my ($HOME)/.gEDA > directory that contains the line: > > (paper-size 17.0 11.0)
> and that should do it. So I start up gschem and the console output tells > me it read the gschemrc file in ($HOME)/.gEDA, but the desired effect > does not occur. Am I doing the right thing? > > I'm using Mac OS X (10.4.10) with X11 v1.1.3 and gschem v1.0.1-20070626. What is your desired effect? The line above ought to pre-select "B" size paper in the print dialog. If you want a "B" sized title block, you should replace the default title block which is inserted with one of a different size. For example, in my gschemrc file, I have: (define default-titleblock "title-bordered-A2.sym") You might want "title-B.sym" or "title-bordered-B.sym"? Regards, -- Peter Clifton Electrical Engineering Division, Engineering Department, University of Cambridge, 9, JJ Thomson Avenue, Cambridge CB3 0FA Tel: +44 (0)7729 980173 - (No signal in the lab!) _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user