> How good is the temp. control on your oven? Er, zero control. I use a hotplate, which heats only the back of the board, so the solder melts before the chips get too hot. However, it's a $20 item, and basically has "on" and "off" settings.
What I do is turn it on and wait. About 3 minutes later, the solder paste starts melting. It takes about 10-20 seconds for the whole board to be done after that, then I slide it off the hotplate onto a cooling rack. > I notice the CPU is socketed could you please try powering up the > board without it. Without the CPU, the oled won't power up. You're not supposed to apply +12v until you program all the timing parameters, else you burn out the OLED cells. _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user