Surprisingly, these examples don't use G87 at all... Nevertheless I never had problems when manufacturing plated/non-plated slots with this app.
Regards, Carlos El dom, 11-11-2007 a las 22:42 -0500, DJ Delorie escribió: > > It seems there are two ways of doing slots. > > Yup. The G85 one seems simple enough. I think the G87 one would > require the fab's engineers to check them. Last time I asked a fab > about outline routing files, they said "Don't" as they need to know > what their machines need for offsets and limits and such. > > > I can also get you a sample drill file with a slot, if you want. > > Sure. > > > _______________________________________________ > geda-user mailing list > geda-user@moria.seul.org > http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
; This is 10mm x 10mm board with a slot hole at the center (x=5mm , y=5mm) ; of size 4.75mm x 3.2mm. M48 METRIC,TZ FMAT,2 ICI,OFF T01C3.2000 % M71 G90 G93X0Y0 T01 G00X5000Y5000 M15 G01X5775 X4225 M17 T00 M30
; This is a 1x1.6mm plated hole at x=5mm, y=5mm. M48 METRIC,TZ FMAT,2 ICI,OFF T01C1.0000 % M71 G90 G93X0Y0 T01 G00X5000Y5000 M15 G01X5300 X4700 M17 T00 M30
_______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user