On Fri, 2008-02-08 at 12:57 +0000, Peter Baxendale wrote: > Thanks for responding to this, and I've found out what's going wrong. I > had "promote-invisible" enabled in my gafrc file and was editing the > slot attribute which was then visible. > > If instead I turn off promote-invisible, then add a slot attribute with > the required number it works fine - pins updated at once. > > I'm re-reading the gschem manual to try to understand this - it's not > immediately obvious to me why it doesn't work the way I was doing it, or > why you need a hidden slot attribute in addition to the visible one. I'm > sure there are good reasons, though.
It may be a bug in the pinnumber update, picking up the one inside the symbol and not letting the promoted one over-ride it. I'll investigate. -- Peter Clifton Electrical Engineering Division, Engineering Department, University of Cambridge, 9, JJ Thomson Avenue, Cambridge CB3 0FA Tel: +44 (0)7729 980173 - (No signal in the lab!) _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user