I'm trying to draw an arc in on a footprint. I'm able to draw it but I can't get the arc's center point to change when I bring it up in pcb. Can someone please look at the way I created the footprint, shown below, and how I'm changing the location of the center point and see what I'm doing wrong? Thanks # author: Rob Butts # email: [1]r.but...@gmail.com # dist-license: GPL # use-license: unlimited #180uH INDUCTOR CDRH125NP-181MC Element[0x00000000 "180uH INDUCTOR" "" "" 0 0 -11827 -10953 0 100 0x00000000] ( # Pin[0 0 9000 2000 9600 8268 "LED HOLE" "" "edge2"] # Pad[-7874 0 -6890 0 5906 2000 7906 "1" "1" 0x00000100] # Pad[6890 0 7874 0 5906 2000 7906 "2" "2" 0x00000100] ElementLine[-12400 -24200 12400 -24200 1200] ElementLine[-12400 24200 12400 24200 1200] ElementLine[-24200 -12400 -24200 12400 1200] ElementLine[24200 -12400 24200 12400 1200] ElementArc[0 0 10000 10000 20 50 1200] ) CHANGED CENTER POINT # author: Rob Butts # email: [2]r.but...@gmail.com # dist-license: GPL # use-license: unlimited #180uH INDUCTOR CDRH125NP-181MC Element[0x00000000 "180uH INDUCTOR" "" "" 0 0 -11827 -10953 0 100 0x00000000] ( # Pin[0 0 9000 2000 9600 8268 "LED HOLE" "" "edge2"] # Pad[-7874 0 -6890 0 5906 2000 7906 "1" "1" 0x00000100] # Pad[6890 0 7874 0 5906 2000 7906 "2" "2" 0x00000100] ElementLine[-12400 -24200 12400 -24200 1200] ElementLine[-12400 24200 12400 24200 1200] ElementLine[-24200 -12400 -24200 12400 1200] ElementLine[24200 -12400 24200 12400 1200] ElementArc[-100 100 10000 10000 20 50 1200] ) It doesn't mater what quadrant I move the center point of the arc to relative to the mark, the arc doesn't move. I am able to change all the other characteristics.
References 1. mailto:r.but...@gmail.com 2. mailto:r.but...@gmail.com
_______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user