On Thu, 2009-03-05 at 18:26 +0100, Stefan Salewski wrote: > On Sun, 2009-03-01 at 14:42 -0500, DJ Delorie wrote:
> A related question: > > Is --enable-dbus only valid in conjunction with a GUI (GTK/Motif) or can > dbus be used if PCB is compiled without GUI (we have a bug related to > this in Gentoo bugzilla database). The dbus support relies on about 4 hooks provided by the HID interface which are only implemented in the GTK and Lesstif HIDs. They relate to timers and file-watches (for IO). These allow the DBus library to integrate with the main-loop of the running GUI. It won't work without them, so I guess the easy answer is.. no, the Batch HID does not support DBus. If anyone had a use-case for a DBus enabled batch HID, then either the hooks could be implemented (along with a home-brew main-loop), or more sensibly, make the batch HID dependent on GLib and its main-loop, then take the hook code straight from the GTK HID. -- Peter Clifton Electrical Engineering Division, Engineering Department, University of Cambridge, 9, JJ Thomson Avenue, Cambridge CB3 0FA Tel: +44 (0)7729 980173 - (No signal in the lab!) _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user