Yeah, I put the tqfp in but prior to doing the layout a friend
soldered a few micros to the adapters. It is probably going to be
easier to unsolder the chips.
On Fri, Mar 6, 2009 at 4:56 PM, DJ Delorie <[1...@delorie.com> wrote:
That's not a standard footprint, so you'll likely be creating your
own.
*Maybe* one of the PGA footprints might work, but double check the
pin
numbers!
Why do you need these adapters if you're making your own pcb? Just
drop a tqfp44 footprint on your board and be done with it.
_______________________________________________
geda-user mailing list
[2]geda-u...@moria.seul.org
[3]http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
References
1. mailto:d...@delorie.com
2. mailto:geda-user@moria.seul.org
3. http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
_______________________________________________
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
