When you say a wire, are you talking hollow wire so that the component can be inserted into the hole also? I'm not understanding. Does the 22ga wire lay beside the component lead? If that's the case all the thru holes will be too small.
I hate to use the word assume but I assumed the solder would just bridge along the component lead to the other side of the board. On Wed, Apr 8, 2009 at 5:02 PM, DJ Delorie <[1...@delorie.com> wrote: > I have a 2 layer home made board with laser diodes. We're having a hard > time getting the solder to flow from one side of the board to the other to > connect traces. Does anyone have any suggestions how to get the solder to > flow well to the component side? You mean for vias? I doubt you'd be able to get solder to bridge a via for you, you'll need to put a wire or something through the hold. I use 22ga speaker wire, destranded. _______________________________________________ geda-user mailing list [2]geda-u...@moria.seul.org [3]http://www.seul.org/cgi-bin/mailman/listinfo/geda-user References 1. mailto:d...@delorie.com 2. mailto:geda-user@moria.seul.org 3. http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
_______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user