On Tue, 2009-06-09 at 08:25 -0600, John Doty wrote: > On Jun 9, 2009, at 8:15 AM, Peter Clifton wrote: > > > New text elements created by gEDA 1.6.0 will be sized directly in > > points, assuming gschem world coordinate units are 1/1000th of an > > inch, > > and 1pt is 1/72 of an inch. > > Do gEDA users commonly use schematic scales where a world coordinate > unit is 1/1000 of an inch? I don't: usually I use a B or C frame and > print on letter or A4, which make the coordinate units smaller.
Not as printed - no, unless your title block matches your paper size. However; the title-blocks defined to be particular paper sizes, do have their sizes such that 1x world unit is 1/1000th of an inch. -- Peter Clifton Electrical Engineering Division, Engineering Department, University of Cambridge, 9, JJ Thomson Avenue, Cambridge CB3 0FA Tel: +44 (0)7729 980173 - (No signal in the lab!) _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user