Hello, I've good results and very fair pricing with http://www.pcb-pool.com/ and the Fab here in Germany. But they also have Fabs in UK/US, so I would recommend give it a try. Last time I let them fabricate an 4-Layer 6mil Rules PCB with Silk, Mask, plated Holes, unplated Holes and free Stencil. The offer an online calculator for PCBs - try it. The want a fee for converting RS-274X, but also provide a free tool (Gerber-Viewer) to convert to a format they accept without charge. Conversion is done in approx. 5min (Viewer runs also under wine). The also provide the possibility to deliver tested over-produced PCBs for 50% discount.
No - I'm not affiliated in any way with them - just an satisfied customer. ;) Greetings, _____________________________________ cand. Dipl.-Ing. (FH) Marcel Schmedes Research & Technology Cockpit Cabin Control Diehl Aerospace GmbH An der Sandelmuehle 13 D-60439 Frankfurt/Main Phone: +49 (0) 69 5805-1712 Mail: marcel.schmedes.ext...@diehl-aerospace.de www. http://www.diehl-aerospace.de geda-user-boun...@moria.seul.org schrieb am 19.06.2009 04:52:10: > Hello gEDA/PCB users, > > Ineiev is almost done with the layout of my SDSL board, and I am now > looking for a place to fab it. I am posting here in the hope that some > kind soul can suggest a PCB fab shop that would be a good fit for what I > want to build. Here are my board features: > > * Simple rectangular PCB shape, 130x165 mm (about 33 sq in) > * 4 layers (I was originally planning on 6, but Ineiev got it laid out > in 4 layers without having to increase the size!) > * Soldermask on both sides (color doesn't matter) > * Silk screen on both sides (color doesn't matter) > * SnPb finish - this one is an absolute requirement for ideological / > philosophical reasons, RoHS crap is *not* acceptable. > * Both plated and unplated drill. Some parts have plastic mounting > elements and I want unplated holes for those. > * 8 mil rules should be good enough (Ineiev can correct me if I'm wrong > on this one). > > Other considerations: > > * Quantity: 1 to 5 boards depending on the pricing > * I would prefer a shop somewhere in USA for the ease of shipping, > payment, communication, avoidance of customs etc. > * I'm hoping for a price range somewhere around $500-700. > > Would anyone here happen to know of a PCB fab shop that can do what I > want? > > TIA, > MS . Der Inhalt dieser E-Mail ist für den Absender rechtlich nicht verbindlich. Informieren Sie uns bitte, wenn Sie diese E-Mail fälschlicherweise erhalten haben (Fax: +49-7551-891-4001). Bitte löschen Sie in diesem Fall die Nachricht. Jede Form der weiteren Benutzung ist untersagt. . The content of this e-mail is not legally binding upon the sender. If this e-mail was transmitted to you by error, then please inform us accordingly (Fax: +49-7551-891-4001). In such case you are requested to erase the message. Any use of such e-mail message is strictly prohibited. _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user