With your help my schematic now shows up properly in gschem. All of the symbols are present. Unfortunately, when I run a DRC2 check, I get the following:
Command line return - g...@cruncher:~/gaf$ gnetlist -g drc2 ./PFC_1KwRegulator/PFC_1KwRegulatorP2.sch -o ./PFC_1KwRegulator/drc2.txt gEDA/gnetlist version 1.4.0.20080127 gEDA/gnetlist comes with ABSOLUTELY NO WARRANTY; see COPYING for more details. This is free software, and you are welcome to redistribute it under certain conditions; please see the COPYING file for more details. Remember to check that your schematic has no errors using the drc2 backend. You can do it running 'gnetlist -g drc2 your_schematic.sch -o drc_output.txt' and seeing the contents of the file drc_output.txt. Loading schematic [/home/gary/gaf/./PFC_1KwRegulator/PFC_1KwRegulatorP2.sch] WARNING: Found a placeholder/missing component, are you missing a symbol file? [IR1150-1.sym] WARNING: Found a placeholder/missing component, are you missing a symbol file? [fan-cpu-1.sym] DRC errors found. See output file. g...@cruncher:~/gaf$ Notice that the two symbols that were a problem with gschem are now still a problem with DRC2. I have the gafrc file in ./gaf/gafrc and ./.gEDA/gafrc -> ./gaf/gafrc and the same in my project directory. The DRC output file is - Checking non-numbered parts... Checking duplicated references... Checking nets with only one connection... ERROR: Net 'unnamed_net16' is connected to only one pin: IN4:1 . ERROR: Net 'unnamed_net15' is connected to only one pin: IN3:1 . ERROR: Net 'unnamed_net14' is connected to only one pin: IN1:1 . ERROR: Net 'unnamed_net12' is connected to only one pin: R209:1 . ERROR: Net 'unnamed_net8' is connected to only one pin: R205:2 . Checking pins without the 'pintype' attribute... NOTE: Found pins without the 'pintype' attribute: IN4:1 IN3:1 IN1:1 IN2:1 IN5:1 IN6:1 Checking type of pins connected to a net... Checking unconnected pins... Checking slots... Checking duplicated slots... Checking unused slots... No warnings found. Found 5 errors. The errors are all due to the missing symbols. The missing pin types are strange since they are all clearly labeled pwr.. Any help will be appreciated. Need any additional info, just ask. Gary Roach _______________________________________________ geda-user mailing list [email protected] http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
