On Sun, 02 Aug 2009 20:33:15 +0200, Oliver Lehmann wrote: > I made my first PCB ever - and I did it with PCB
Welcome to the club of geda/pcb users! > I now made the board a > bit bigger to have the connector placed properly. I then drew a brown > line (component layer) to mark where the board should end: Fine. This is almost the recommended way of dealing with this issue: Add a layer called "outline" and place a the outline of the board there. Gerber export will produce a separate gerber file, that tells the fab where to cut the board. I'd include a README in the zip file of gerbers where I explicitely state which file to take the outline from. ---<(kaimartin)>--- PS: I noticed a dead end track extending from the seventh row of pins of C32. Is this deliberate? -- Kai-Martin Knaak Öffentlicher PGP-Schlüssel: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x6C0B9F53 _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user