On Thu, Jul 15, 2010 at 11:20 PM, Bert Timmerman <bert.timmer...@xs4all.nl> wrote: > > At one moment in time it did actually compile (with a lot warnings) but the > resulting files were wrong, that is, they didn't load into AutoCAD. > > I never found enough free time for this projects to finish it into a proper > working tool. >
I looked at it for a while and couldn't make heads nor tails of it, so I ended up writing my own utility: http://vivara.net/software/pcbtodxf/ It's just a little command-line thing that does what I want and no more. To be clear, it is NOT a gerber->dxf tool, rather it is a pcb->dxf tool. I want to edit pcb's input format, not output format, if that makes sense. Basically I took the dxflib example program and grafted a mono-buttocked .pcb parser onto the front of it. Seems to work. Regards, Mark markra...@gmail -- Mark Rages, Engineer Midwest Telecine LLC markra...@midwesttelecine.com _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user