-----Original Message----- > Karl Hammar wrote > Ok, a first step would then be:
> 1, add/correct pintype to the sym files > 1a, which programs use pintype > 1b, identify the correct meaning of pintype values as used today > 1c, add missing pintypes (eg. should we have one for "nc") > 2, remove numslots=0 warning from gsymcheck > Anything else? +1 for nc since ICs have pins that are labeled that way. Would the DRC just ignore it, or would the DRC complain if it was connected to anything? I could see people still wanting to connect a nc pin to a test point or a header because they want to check for shorts, or if there is a chip rev that adds extra functionality to that pin in a package. I would also like to see a pwr_src pin type which would be the output of the voltage regulator (or source). That way the DRC would warn you if you shorted two power sources together or if you forgot to hook one of your power input pins to the power plane (and only connected it to a capacitor instead). Andy Miner _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user