On Thu, 2010-12-23 at 11:07 +0000, Chris Malton wrote: > I'd love to actually help fix this bug, and/or figure out what I'm doing > wrong, but I can't make head or tail of where I should be investigating. > > I'd like to point out that the normal autorouter can complete routing > the circuit, and so can I by hand. The normal autorouter uses the > outline layer (which is not a good idea as the company I use for making > PCBs uses that for cuts!)
Switch off any layers you don't want the autorouter(s) to use. If you need to constrain routing to with an outline, make a copy of the outline edge on the copper layers being routed. -- Peter Clifton Electrical Engineering Division, Engineering Department, University of Cambridge, 9, JJ Thomson Avenue, Cambridge CB3 0FA Tel: +44 (0)7729 980173 - (No signal in the lab!) Tel: +44 (0)1223 748328 - (Shared lab phone, ask for me) _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user