Oliver King-Smith wrote: > I am continuing to have problems with multi part symbols. Here > > I have an op amp define as thus: > ( snip ) > > When I try to use this op amp, the pin number show up wrong on the schematic. > > For slot 1 they show up as 1,2,1 (not 3,2,1). When I try slot 2 I get 5,6,1 > not > 5,6,7.
The slotting mechanism expects the pinseq numbers to start at 1 and increment to the number of pins. It uses these numbers to map the sequences given in the slotdef string. The pin with pinseq=1 gets mapped to the first number in the slotdef string. The second maps to the second number in the string and so on. Your symbol has the pinseq attributes at 1, 2 and 5. The "5" is ignored since there are only three numbers in the slotdef string. Thus it keeps its default value "1" no matter what slot is chosen. Bottom line: A symbol with three pins should have the pinseq values "1", "2" and "3". Anything else confuses the slotting mechanism. Here is a corrected version of your symbol. Note, that the value of the pin number attributes is ignored. For demonstration, I set them to some wild numbers. /------------- v 20100214 2 L 200 800 200 0 3 0 0 0 -1 -1 L 200 800 800 400 3 0 0 0 -1 -1 T 400 2600 5 10 0 0 0 0 1 device=SUBCIRCUIT T 400 1100 5 10 0 0 0 0 1 slot=1 T 400 1700 5 10 0 0 0 0 1 numslots=2 T 400 1300 5 10 0 0 0 0 1 slotdef=1:1,2,3 T 400 1500 5 10 0 0 0 0 1 slotdef=2:5,6,7 L 800 400 200 0 3 0 0 0 -1 -1 L 300 650 300 550 3 0 0 0 -1 -1 L 250 600 350 600 3 0 0 0 -1 -1 L 250 200 350 200 3 0 0 0 -1 -1 P 0 600 200 600 1 0 0 { T 150 650 5 8 1 1 0 6 1 pinnumber=111 T 150 550 5 8 0 1 0 8 1 pinseq=3 T 250 600 9 8 0 1 0 0 1 pinlabel=in+ T 250 600 5 8 0 1 0 2 1 pintype=in } P 0 200 200 200 1 0 0 { T 150 250 5 8 1 1 0 6 1 pinnumber=222 T 150 150 5 8 0 1 0 8 1 pinseq=2 T 250 200 9 8 0 1 0 0 1 pinlabel=in- T 250 200 5 8 0 1 0 2 1 pintype=in } P 800 400 1000 400 1 0 1 { T 800 450 5 8 1 1 0 0 1 pinnumber=333 T 800 350 5 8 0 1 0 2 1 pinseq=1 T 750 400 9 8 0 1 0 6 1 pinlabel=out T 750 400 5 8 0 1 0 8 1 pintype=out } T 700 600 8 10 1 1 0 0 1 refdes=U? T 400 2800 5 10 0 0 0 0 1 description=operational amplifier T 400 2400 5 10 0 0 0 0 1 symversion=0.1 T 400 1950 8 10 0 0 0 0 1 footprint=soic-08-d.fp T 400 2200 8 10 0 0 0 0 1 file=./spice/OPA333.lib \---------------- ---<)kaimartin(>--- -- Kai-Martin Knaak Öffentlicher PGP-Schlüssel: http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x6C0B9F53 _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user