On Tue, 2011-01-18 at 14:15 -0500, George M. Gallant, Jr. wrote: > On 01/18/2011 01:13 PM, Peter Clifton wrote: > > On Tue, 2011-01-18 at 11:56 -0500, George M. Gallant, Jr. wrote: > > > >> See the attached screenshot. > > Mailing list has scrapped the attachment I think. > > > > I don't think there is a better technique for now. Perhaps you could > > explain what the polygons are to be used for? > > > I have an analog front end and I would like to isolate the return paths. > It does need a direct connect to digital ground (min current) so I put a > 10mil bridge between the 2. Also put thru holes so I can cut and repair > the bridge as necessary. > > BTW, my analog design skills are poor so feel free to comment. The board > needs to be finished this week.
I think the way you've done it is probably the best we can do for now. -- Peter Clifton Electrical Engineering Division, Engineering Department, University of Cambridge, 9, JJ Thomson Avenue, Cambridge CB3 0FA Tel: +44 (0)7729 980173 - (No signal in the lab!) Tel: +44 (0)1223 748328 - (Shared lab phone, ask for me) _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user