Thanks for your quick answer and sorry for sending an half finished mail. Thomas: > In the BIOS, there is usually a "restore after power loss" option,
Yes, but not on this motherboard. > however if that doesn't work, I'd suggest a power on reset controller > connected to the power button. Here's one example, ... There are already something similar in the atx supply. If the motherboard has atx power connector the solution is simple, just connect "PS_ON#" (pin 16) with ground (eg. pin 17). Doing that I get the power supply to start. But in my case the motherboard has a single 12 V connetor. > You could connect this to the +5Vsb line and provide a power on > signal to the pin handling that on the switch connector. I come up with http://turkos.aspodata.se/git/openhw/pon_switch/ which seems to work. Are there any better solutions? Regards, /Karl Hammar ----------------------------------------------------------------------- Aspö Data Lilla Aspö 148 S-742 94 Östhammar Sweden +46 173 140 57 _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user