I just started up again using gschem after a long break, and was surprised to see a new feature called magnet net. I general, it was great, but it also caused problems. I started with probably an undersized title block, and the page rapidly got stuffed with just a 40 pin ATMega and 3 L293 motor drivers. I had the lines spaced very close, and the magnet net would not let me pick which pin or line to connect to when they were closely spaced. Also, if the line was very close to the pin, it would reject the line altogether. I tried turning it off, and then nothing would connect. Lines were not on the same grid spacing as the pins, and it was really tough making gschem accept a net connection. In short, is there a way to reduce the 'radius' of the magnet net for tight spacing? Mike -- Burn the Land, Boil the Sea, You can't take the SKY from me!
_______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user