On 06/08/2011 11:08 PM, Rob Butts wrote:
I forgot to mention the power sources are DC and the power connectors
need to have at least 6 amp rating.
http://www.mouser.com/catalog/629/1099.pdf 31 amps
and here are some ideas on ways to use these type of connectors for battery
boxes:
http://www.prc68.com/I/PowerPole.shtml
originally called Anderson power pole, from 1966.
I have a water proof box with two volage sources inside. I need a
power connector to be water proof that I can in the box and be
water
proof.
Not sure what you mean here, but panel connector means attaches to a through
hole.
The above suggestion is not really a panel connector but the plastic
shells do have versions you can lock one to another
and to other things surrounding a pair of them. Would it be good enough if
you made
a rain proof cover to go over the downward facing pair of contacts
that are on the side of the battery box? Since you say not need immersible
water tight...
John
_______________________________________________
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
