Antonio A Todo Bom <[EMAIL PROTECTED]> writes: > Dear Mr. Martin, > > The numbers in slotdef must be refeerence to all pinseq, but they are the >pinnumber, presenting sequentialy all pinseq. > > Here a made a litle exanple, of a opto-iso, with 4 slots, and it is working ok >in the new gSchem attibutes scheme. > > > ---------CUT HERE ------------------- [SNIP] > ________________CUT HERE_______________ > > > Please note that slotdef syntax is: > > slotdef=1:1,2,15,16 > slotdef=2:3,4,13,14 > slotdef=3:5,6,11,12 > slotdef=4:7,8,9,10 > > In the new master attributes doc, Ales took about all pinseq must be present, >but by their pinnumbers. > > Best regards, > > Antonio Augusto Todo Bom Neto > LAX Eletronica e Telecomunicacoes Ltda > gEDA-BR - Users Group - http://gedabr.projetos.etc.br
My apologies if I seem to be rather dense, but I don't understand. Your example works perfectly, but if I remove one of the pinnumbers (for example the one with the value 16) and try to recreate it, the autonumbering stops working (it's stuck on 16 when I change the slot). What I want to know is what step(s) do I have to take after recreating the attribute "pinnumber" to make this automatic numbering work again? Regards -- Martin Persson [EMAIL PROTECTED] http://martin.kfib.org/
