Em Seg 16 Jan 2006 12:47, Harry Eaton escreveu: > Xtian Xultz wrote: > > It is important to know that pressing O will get you erros, so it is > > important > > > >to finish the board before placing that pads. > > What you have done is create an (unnamed) element with a single SMD pad.
Exactly! > I like to think of the shield as an element (which after all is a part > soldered on the board). So give it a name and add it to the netlist. > Name it "Shield 1" for instance and have pin 1 connect to the ground > net. If you don't want the shield name on the silkscreen, simply hide it > with the "h" key. That way you won't get errors and you won't forget to > place it on the board. Why didnt I think like that before? Damn... ;) > Also, the via mask clearances work fine for me in both the post-script > and gerber outputs, but it doesn't "jump" the way I described, except on > the display, which is a bug. Keep hitting "k" until the clearance > exceeds the via diameter, then back it off if you like. HA! It worked now! Thank you Harry. The jump scrambled me, because pressing only one time K opens the via in the screen. Pressing again didnt make any difference, but now if I hold or press K several times the via become open. That will save me a lot of work, thanks again Harry!
